[RFC v2 11/18] ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since AM33XX supports only DT-boot, this is needed
for the appropriate device nodes to be created.

Note: OCMC RAM is part of the PER power domain and supports
retention. The assembly code for low power entry/exit will
run from OCMC RAM. To ensure that the OMAP PM code does not
attempt to disable the clock to OCMC RAM as part of the
suspend process add the no_idle_on_suspend flag.

Signed-off-by: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Cc: Benoit Cousson <b-cousson@xxxxxx>
Cc: Paul Walmsley <paul@xxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
Cc: Vaibhav Hiremath <hvaibhav@xxxxxx>
---
v1->v2:
	Add a proper changelog

 arch/arm/boot/dts/am33xx.dtsi |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index c2f14e8..4731748 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -385,5 +385,16 @@
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
 		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "ti,ocmcram";
+			ti,hwmods = "ocmcram";
+			ti,no_idle_on_suspend;
+		};
+
+		wkup_m3: wkup_m3@44d00000 {
+			compatible = "ti,wkup_m3";
+			ti,hwmods = "wkup_m3";
+		};
 	};
 };
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux