The current HWMOD code expects the memory region with the IP's SYSCONFIG register to be marked with ADDR_TYPE_RT flag. CPGMAC0 hwmod entry specifies two memory regions and marks both with the flag ADDR_TYPE_RT although only the 2nd region has the SYSCONFIG register. This leads to the HWMOD code accessing the wrong memory address for idle and standby operations. Fix this by removing the ADDR_TYPE_RT flag from the 1st memory region in CPGMAC0 hwmod entry. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@xxxxxx> Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx> Cc: Benoit Cousson <b-cousson@xxxxxx> Cc: Paul Walmsley <paul@xxxxxxxxx> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> Cc: Vaibhav Hiremath <hvaibhav@xxxxxx> --- v1->v2: Address review comments from Santosh and Vaibhav Hiremath. Previous discussion on the change is @ http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/129512.html arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 5c34d4b..863ce08 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -2496,7 +2496,6 @@ static struct omap_hwmod_addr_space am33xx_cpgmac0_addr_space[] = { { .pa_start = 0x4a100000, .pa_end = 0x4a100000 + SZ_2K - 1, - .flags = ADDR_TYPE_RT, }, /* cpsw wr */ { -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html