Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v4 10/12] video: da8xx-fb: ensure pdata only for non-dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v4 11/12] video: da8xx-fb: setup struct lcd_ctrl_config for dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v4 12/12] video: da8xx-fb: CCF clock divider handling
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 1/4] ARM: OMAP2+: dpll: round rate to closest value
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 2/4] ARM: OMAP2+: dpll: am335x - avoid freqsel
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 4/4] ARM: AM33XX: clock: SET_RATE_PARENT in lcd path
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 3/4] ARM: OMAP2+: clock: DEFINE_STRUCT_CLK_FLAGS helper
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 0/4] ARM: AM335x: LCDC platform support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 2/2] clk: divider: handle minimum divider
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 1/2] clk: divider: prepare for minimum divider
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH v2 2/4] ARM: OMAP: devices: create device for usb part of control module
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] usb: musb: fix context save over suspend.
  • From: "Bilovol, Ruslan" <ruslan.bilovol@xxxxxx>
• Re: [PATCH v5 00/14] DMA Engine support for AM33XX
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 6/6] OF: Introduce DT overlay support.
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] OF: Introduce Device Tree resolve support.
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/14] DMA Engine support for AM33XX
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH 5/6] i2c: omap: wait for transfer completion before sending STP bit
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/6] i2c: omap: get rid of b_hw flag
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/6] i2c: omap: in case of VERSION_2 read IRQSTATUS_RAW but write to IRQSTATUS
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/6] i2c: omap: improve 'rev' a little bit
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/6] i2c: omap: no need to access platform_device
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/6] i2c: omap: also complete() when stat becomes zero
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/6] i2c: deferred STP
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: [PATCH REBASE 0/6] i2c: omap: misc changes
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: fix draining irq handling
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH 2/4] mtd: devices: elm: Low power transition support
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH 4/4] mtd: nand: omap2: Low power transition support
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH 3/4] arm: gpmc: Low power transition support
  • From: Philip Avinash <avinashphilip@xxxxxx>
• Re: [PATCH 2/4] drm/i2c: nxp-tda998x (v2)
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH 1/4] drm/tilcdc: add TI LCD Controller DRM driver (v3)
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• [PATCH 0/4] LOW power sleep support for OMAP nand driver
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH 1/4] arch: arm: gpmc: gpmc migration support
  • From: Philip Avinash <avinashphilip@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/4] TI LCDC DRM driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] drm/i2c: nxp-tda998x (v2)
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/tilcdc: add TI LCD Controller DRM driver (v3)
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/3] ARM: dts: AM33XX: Add GPMC node
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• RE: [PATCH 1/3] ARM: dts: AM33XX: Add ELM node
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• Re: [PATCH 6/6] OF: Introduce DT overlay support.
  • From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 5/6] OF: Introduce Device Tree resolve support.
  • From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/14] DMA Engine support for AM33XX
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] drm/tilcdc: add TI LCD Controller DRM driver (v3)
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH 1/4] drm/tilcdc: add TI LCD Controller DRM driver (v3)
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH 4/4] drm/tilcdc: add support for LCD panels (v4)
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH 3/4] drm/tilcdc: add encoder slave
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH 2/4] drm/i2c: nxp-tda998x (v2)
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH 0/4] TI LCDC DRM driver
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: [GIT PULL] omap fixes for v3.8-rc4
  • From: Olof Johansson <olof@xxxxxxxxx>
• [GIT PULL] omap fixes for v3.8-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 00/12] video: da8xx-fb: am335x DT support
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] clk: divider: prepare for minimum divider
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap: Fix build break in drm.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: [PATCH v3 00/12] video: da8xx-fb: am335x DT support
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 03/12] video: da8xx-fb: enable sync lost intr for v2 ip
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 00/12] video: da8xx-fb: am335x DT support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 02/12] video: da8xx-fb: fix 24bpp raster configuration
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 01/12] video: da8xx-fb: make io operations safe
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 05/12] video: da8xx-fb: ensure non-null cfg in pdata
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 04/12] video: da8xx-fb: use devres
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 06/12] video: da8xx-fb: reorganize panel detection
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 07/12] video: da8xx-fb: minimal dt support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 08/12] video: da8xx-fb: invoke platform callback safely
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 09/12] video: da8xx-fb: obtain fb_videomode info from dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 10/12] video: da8xx-fb: ensure pdata only for non-dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 12/12] video: da8xx-fb: CCF clock divider handling
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 11/12] video: da8xx-fb: setup struct lcd_ctrl_config for dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 0/4] ARM: AM335x: LCDC platform support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 1/4] ARM: OMAP2+: dpll: round rate to closest value
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 2/4] ARM: OMAP2+: dpll: am335x - avoid freqsel
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 3/4] ARM: OMAP2+: clock: DEFINE_STRUCT_CLK_FLAGS helper
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 4/4] ARM: AM33XX: clock: SET_RATE_PARENT in lcd path
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 2/2] clk: divider: handle minimum divider
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 1/2] clk: divider: prepare for minimum divider
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v5 00/14] DMA Engine support for AM33XX
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 02/16] ARM: davinci: move private EDMA API to arm/common
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v1 5/6] usb: otg: add device tree support to otg library
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v1 2/6] usb: otg: utils: add facilities in phy lib to support multiple PHYs of same type
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v1 4/6] drivers: usb: musb: omap: make use of the new PHY lib APIs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v1 2/6] usb: otg: utils: add facilities in phy lib to support multiple PHYs of same type
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• RE: OMAP baseline test results for v3.8-rc4
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: OMAP baseline test results for v3.8-rc4
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [RFC v2 16/18] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP3: cm-t3517: add MMC support
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 6/6] OF: Introduce DT overlay support.
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] OF: Introduce Device Tree resolve support.
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] ARM: dts: twl6030: Add PWM support
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 2/5] ARM: dts: twl6030: Add PWM support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/5] ARM: dts: twl6030: Add PWM support
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v1 5/6] usb: otg: add device tree support to otg library
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 0/5] ARM: dts: OMAP3+: PWM support for TWL and selected boards
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: [PATCH 0/5] ARM: dts: OMAP3+: PWM support for TWL and selected boards
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [RFC PATCH] gpio/omap: fix pm_runtime for IRQ functions
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [GIT PULL] ARM: OMAP: Audio support via omap-twl4030 and pwm support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v1 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 3/6] ARM: OMAP: USB: Add phy binding information
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 4/6] drivers: usb: musb: omap: make use of the new PHY lib APIs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 2/6] usb: otg: utils: add facilities in phy lib to support multiple PHYs of same type
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 1/6] usb: otg: Add an API to bind the USB controller and PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 5/6] usb: otg: add device tree support to otg library
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH] gpio/omap: fix pm_runtime for IRQ functions
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• RE: [PATCH v3 4/8] MFD: ti_am335x_tscadc: add device tree binding information
  • From: "Patil, Rachna" <rachna@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: fix context save over suspend.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH] arm: omap: Fix build break in drm.c
  • From: Archit Taneja <archit@xxxxxx>
• Re: [RFC PATCH] gpio/omap: fix pm_runtime for IRQ functions
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/4] ARM: mach-omap2: apply the errata at run time rather
  • From: Srinidhi Kasagar <srinidhi.kasagar@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: mach-omap2: apply the errata at run time rather
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/4] ARM: mach-omap2: apply the errata at run time rather
  • From: Srinidhi Kasagar <srinidhi.kasagar@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] OF: Introduce DT overlay support.
  • From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] OF: Introduce Device Tree resolve support.
  • From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP4 PM bootloader dependency problems
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] mtd nand : onfi need to be probed in 8 bits mode
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 13/15] drivers/usb/musb/omap2430.c: adjust duplicate test
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: musb: fix context save over suspend.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5: clock data: Add OMAP54XX full clock tree and headers
  • From: Sebastien Guiriec <s-guiriec@xxxxxx>
• Re: [PATCH 2/3] ARM: dts: AM33XX: Add GPMC node
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: AM33XX: Add ELM node
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: DT node Timer iteration fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: omap: fix draining irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] ARM: OMAP: some clock/hwmod fixes for v3.8-rc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix section warning for omap_init_ocp2scp()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH 3/4] ARM: mach-omap2: apply the errata at run time rather
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink shared transport
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: fix build break for omapdrm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5: clock data: Add OMAP54XX full clock tree and headers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: omap: fix draining irq handling
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Mark Jackson <mpfj-list@xxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc4
  • From: Nishanth Menon <nm@xxxxxx>
• [GIT PULL] ARM: OMAP: some clock/hwmod fixes for v3.8-rc
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Question regarding broadcast timer/cpuidle and /proc/interrupts
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: Question regarding broadcast timer/cpuidle and /proc/interrupts
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5: clock data: Add OMAP54XX full clock tree and headers
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5: clock data: Add OMAP54XX full clock tree and headers
  • From: Sebastien Guiriec <s-guiriec@xxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Sebastien Guiriec <s-guiriec@xxxxxx>
• Re: [RFC PATCH 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 5/6] usb: otg: add device tree support to otg library
  • From: Roger Quadros <rogerq@xxxxxx>
• Question regarding broadcast timer/cpuidle and /proc/interrupts
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v2 2/4] ARM: OMAP: devices: create device for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/4] drivers: usb: start using the control module driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/4] drivers: usb: phy: add a new driver for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/4] ARM: OMAP2: MUSB: Specify omap4 has mailbox
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/4] usb: musb: add driver for control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] usb: phy: samsung: Remove __devinit, __devexit_p and __exit annotations
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [RFC PATCH 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 5/6] usb: otg: add device tree support to otg library
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: board-zoom: Do not request LCD panel enable GPIO from twl4030
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [RFC PATCH 5/6] usb: otg: add device tree support to otg library
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/4] ARM: mach-omap2: apply the errata at run time rather
  • From: srinidhi kasagar <srinidhi.kasagar@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] OPP usage fixes for RCU locking
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 13/15] drivers/usb/musb/omap2430.c: adjust duplicate test
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 13/15] drivers/usb/musb/omap2430.c: adjust duplicate test
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH] usb: musb: fix context save over suspend.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink shared transport
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 5/6] OF: Introduce Device Tree resolve support.
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• RE: [RFC v2 16/18] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• RE: [PATCH 0/9] ARM: OMAP2+: AM33XX: Misc fixes/updates
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] usb: musb: fix context save over suspend.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 0/2] Fix audio on Nokia RX-51
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/9] ARM: OMAP2+: AM33XX: Misc fixes/updates
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 1/2] ASoC: omap: rx51: Use snd_soc_register_card and add module alias for autoloading driver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] i2c: omap: fix draining irq handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5: clock data: Add OMAP54XX full clock tree and headers
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [RFC v2 12/18] ARM: OMAP2+: timer: Add suspend-resume callbacks for clockevent device
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• RE: [RFC v2 12/18] ARM: OMAP2+: timer: Add suspend-resume callbacks for clockevent device
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [RFC PATCH] gpio/omap: fix pm_runtime for IRQ functions
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/4] OPP usage fixes for RCU locking
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• RE: [PATCH 4/9] ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• RE: [PATCH 1/9] ARM: OMAP2+: AM33XX: CM: Get rid of unncessary header inclusions
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• RE: [PATCH 0/9] ARM: OMAP2+: AM33XX: Misc fixes/updates
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH 5/6] OF: Introduce Device Tree resolve support.
  • From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] ARM: OMAP4: Enable AESS IP.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxxxxxx>
• OMAP baseline test results for v3.8-rc4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] i2c: omap: fix draining irq handling
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH] ARM: OMAP2+: fix build break for omapdrm
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RESEND][PATCH] dma: edma: fix slave config dependency on direction
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/2] Fix audio on Nokia RX-51
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH 1/2] ASoC: omap: rx51: Use snd_soc_register_card and add module alias for autoloading driver
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH 2/2] ARM: OMAP: rx51: Register audio device
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] RX-51: Register twl4030-madc device
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] crypto: omap-sham - Fix compile errors when CONFIG_OF not defined
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] crypto: omap-aes - Updates & New Functionality
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] arm: omap2: gpmc: add DT bindings for OneNAND
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] arm: omap2: gpmc-onenand: drop __init annotation
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] mtd: omap-onenand: pass device_node in platform data
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/8] MFD: ti_am335x_tscadc: add device tree binding information
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH 0/4] OPP usage fixes for RCU locking
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpios reset when kernel starts
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• gpios reset when kernel starts
  • From: Cliff Brake <cliff.brake@xxxxxxxxx>
• [PATCH 3/4] PM / devfreq: add locking documentation for recommended_opp
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/4] cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/4] PM / devfreq: exynos4_bus: honor RCU lock usage
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/4] OPP usage fixes for RCU locking
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/4] cpufreq: OMAP: use RCU locks around usage of OPP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC PATCH] gpio/omap: fix pm_runtime for IRQ functions
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 07/10] ARM: OMAP5: clock data: Add OMAP54XX full clock tree and headers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/10] ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_xxx function calls
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 4/5] ARM: dts: omap5-evm: Update available memory to 2032 MB
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 3/5] ARM: OMAP: prm: Allow prm init to success on OMAP5 SOCs
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/5] ARM: OMAP2+: timer: Update the OMAP5 clocksource name as per clock data
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 1/5] ARM: OMAP5: Update SOC id detection code for ES2
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 0/5] ARM: OMAP5: Misc fixes
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 07/10] ARM: OMAP5: clock data: Add OMAP54XX full clock tree and headers
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 06/10] ARM: OMAP5: powerdomain data: Add OMAP54XX data and update the header
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 10/10] ARM: OMAP5: Enable build and frameowrk initialisations
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 05/10] ARM: OMAP2+: clockdomain data: Add OMAP54XX data and update the header
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 03/10] ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 09/10] ARM: OMAP5: voltagedomain data: Add OMAP5 voltage domain data
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 04/10] ARM: OMAP5: SCRM: Add OMAP54XX header file.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 00/10] ARM: OMAP5: hwmod, clock and prm data files
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 0/5] ARM: OMAP4: Enable AESS IP.
  • From: Sebastien Guiriec <s-guiriec@xxxxxx>
• [PATCH 5/5] ARM: dts: omap4-sdp: Add support for pwm-backlight
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 4/5] ARM: dts: omap4-sdp: Add support for pwm-leds (keypad and charging LED)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/5] ARM: dts: omap3-beagle-xm: Use pwm-leds for pmu_stat LED
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/5] ARM: dts: twl6030: Add PWM support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/5] ARM: dts: twl4030: Add PWM support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/5] ARM: dts: OMAP3+: PWM support for TWL and selected boards
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 0/8] ARM: OMAP: Audio support via omap-twl4030 and pwm support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/8] ARM: OMAP: zoom: Zoom2 does not have extmute functionality
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 8/8] ARM: OMAP: omap3beagle: Use the pwm_leds driver to control the PMU_STAT led
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 6/8] ARM: OMAP: sdp3430: Audio support via the common omap-twl4030 machine driver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 7/8] ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 5/8] ARM: OMAP: zoom: Audio support via the common omap-twl4030 machine driver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 4/8] ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 3/8] ARM: OMAP2+: twl-common: Add default twl4030 audio configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 1/8] ARM: OMAP: 3430sdp: Enable extmute functionality for audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: reset handling in am335x hwmod data
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: AM33XX: Add GPMC node
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] ARM: OMAP2+: AM33XX: CM: Get rid of unncessary header inclusions
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 4/9] ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/4] drivers: usb: phy: add a new driver for usb part of control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] drivers: usb: start using the control module driver
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 1/4] drivers: usb: phy: add a new driver for usb part of control module
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 4/4] drivers: usb: start using the control module driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP: devices: create device for usb part of control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] drivers: usb: phy: add a new driver for usb part of control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 0/6] USB: Add multiple PHYs of same type
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 0/6] USB: Add multiple PHYs of same type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 1/6] usb: otg: Add an API to bind the USB controller and PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v4] ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• [PATCH v3 2/8] input: ti_am335x_tsc: Order of TSC wires, made configurable
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH v3 3/8] input: touchscreen: ti_tsc: remove unwanted fifo flush
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH v3 4/8] MFD: ti_am335x_tscadc: add device tree binding information
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH v3 7/8] IIO: ti_am335x_adc: Add DT support
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH v3 6/8] input: ti_am335x_tsc: Add DT support
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH v3 8/8] arm/dts: AM335x-evm: Add TSC/ADC MFD device support
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH v3 5/8] MFD: ti_am335x_tscadc: Add DT support
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH v3 1/8] input: ti_am335x_tsc: Step enable bits made configurable
  • From: "Patil, Rachna" <rachna@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 0/8] MFD: ti_am335x_tscadc: DT support and TSC features addition
  • From: "Patil, Rachna" <rachna@xxxxxx>
• [PATCH] ARM: OMAP2+: OMAP44XX: Clock: Correct the clock identifiers for OMAP4460 and OMAP4430
  • From: J Keerthy <j-keerthy@xxxxxx>
• [PATCH] ARM: OMAP2+: OMAP44XX: Clock: Correct the clock
  • From: J Keerthy <j-keerthy@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/3] ARM: dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/3] ARM: dts: omap: Add omap control usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/3] ARM: dts: omap: add dt data for MUSB
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/3] ARM: dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/4] ARM: OMAP2: MUSB: Specify omap4 has mailbox
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/4] ARM: OMAP: devices: create device for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/4] usb: musb: add driver for control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 4/4] drivers: usb: start using the control module driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/4] drivers: usb: phy: add a new driver for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• [PATCH 5/9] ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 1/9] ARM: OMAP2+: AM33XX: CM: Get rid of unncessary header inclusions
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 7/9] ARM: OMAP2+: AM33XX: Update the hardreset API
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 9/9] ARM: OMAP2+: AM33XX: control: Add some control module registers and APIs
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 0/9] ARM: OMAP2+: AM33XX: Misc fixes/updates
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 2/9] ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 6/9] ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 3/9] ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 8/9] ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• [PATCH 4/9] ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  • From: Vaibhav Bedia <vaibhav.bedia@xxxxxx>
• Re: [PATCH v2] pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH 0/3] Add device tree support for NAND flash in am335x-evm
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH 1/3] ARM: dts: AM33XX: Add ELM node
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH 2/3] ARM: dts: AM33XX: Add GPMC node
  • From: Philip Avinash <avinashphilip@xxxxxx>
• Re: [RFC PATCH 3/6] usb: otg: utils: change the phy lib to support multiple PHYs of same type
  • From: kishon <kishon@xxxxxx>
• Re: [RFC v2 12/18] ARM: OMAP2+: timer: Add suspend-resume callbacks for clockevent device
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH] ARM: OMAP: gpmc: Add device tree documentation for elm handle
  • From: Philip Avinash <avinashphilip@xxxxxx>
• RE: [PATCH v2 1/2] pwm: pwm-tiehrpwm: Low power sleep support
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• RE: [PATCH v2 2/2] pwm: pwm-tiecap: Low power sleep support
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• RE: [PATCH v2] pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• RE: [PATCH v4 0/3] mtd: nand: OMAP: ELM error correction support for BCH ecc
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] staging: tidspbridge: for 3.9
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_xxx function calls
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP AM3517/05: hwmod data: block WFI when EMAC active
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_xxx function calls
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_xxx function calls
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] ARM: OMAP AM3517/05: hwmod data: block WFI when EMAC active
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/15] OMAP SHAM & AES Crypto Updates
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC v2 13/18] ARM: OMAP2+: AM33XX: timer: Interchance clkevt and clksrc timers
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_xxx function calls
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC v2 12/18] ARM: OMAP2+: timer: Add suspend-resume callbacks for clockevent device
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC v2 12/18] ARM: OMAP2+: timer: Add suspend-resume callbacks for clockevent device
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [RFC PATCH 3/6] usb: otg: utils: change the phy lib to support multiple PHYs of same type
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/2] pwm: pwm-tiehrpwm: Low power sleep support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] pwm: pwm-tiecap: Low power sleep support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part of control module
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Michal Bachraty <michal.bachraty@xxxxxxxxx>
• Re: [RFC v2 16/18] ARM: OMAP2+: AM33XX: Basic suspend resume support
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v3] gpio: twl4030: Cache the direction and output states in private data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v4 0/3] mtd: nand: OMAP: ELM error correction support for BCH ecc
  • From: Artem Bityutskiy <artem.bityutskiy@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] mtd: omap-onenand: pass device_node in platform data
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 1/6] usb: otg: Add an API to bind the USB controller and PHY
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information
  • From: kishon <kishon@xxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v3] gpio: twl4030: Cache the direction and output states in private data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 1/6] usb: otg: Add an API to bind the USB controller and PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH v2 0/2] LOW power sleep support for TI PWM submodules
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH v2 2/2] pwm: pwm-tiecap: Low power sleep support
  • From: Philip Avinash <avinashphilip@xxxxxx>
• [PATCH v2 1/2] pwm: pwm-tiehrpwm: Low power sleep support
  • From: Philip Avinash <avinashphilip@xxxxxx>
• Re: [RFC PATCH 3/6] usb: otg: utils: change the phy lib to support multiple PHYs of same type
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• [RFC] OMAP: 4430sdp: add shared trasport devices to the board file
  • From: Luciano Coelho <coelho@xxxxxx>
• [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• [PATCH] OMAP: omap4-panda: add WiLink shared transport power functions
  • From: Luciano Coelho <coelho@xxxxxx>
• DSS errors in linux next when booted with DTB append
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] mtd nand : onfi need to be probed in 8 bits mode
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [RFC PATCH 1/6] usb: otg: Add an API to bind the USB controller and PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 0/6] USB: Add multiple PHYs of same type
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 6/6] USB: MUSB: OMAP: get PHY by phandle for dt boot
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 4/6] ARM: dts: OMAP: Add phandle to bind PHY with USB controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 3/6] usb: otg: utils: change the phy lib to support multiple PHYs of same type
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 5/6] usb: otg: add device tree support to otg library
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/3] mtd nand : onfi need to be probed in 8 bits mode
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• [PATCH v2 00/11] MFD: twl-core: Cleanup part 2 for 3.9
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 02/11] mfd: twl-core: Clean up module id lookup and definitions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 01/11] ARM: OMAP: zoom-display: Remove the use of TWL4030_MODULE_PWM1
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 03/11] mfd: twl-core: No need to check for invalid subchip ID
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 05/11] mfd: twl-core: Allocate twl_modules dynamically
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 06/11] mfd: twl-core: Do not try to call legacy mfd add_children() when booted with DT
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 07/11] mfd: twl-core: Do not create dummy pdata when booted with DT
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 04/11] mfd: twl-core: Use the lookup table to find the correct subchip for the modules
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 08/11] mfd: twl-core: Move 'inuse' check early at probe time
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 10/11] mfd: twl-core: Remove no longer valid comment regarding to write buffer size
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 11/11] mfd: twl-core: Move twl_i2c_read/write_u8 to header as inline function
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 09/11] mfd: twl-core: Collect global variables behind one private structure (global)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] mmc: omap_hsmmc: MAINTAINERS: change omap_hsmmc maintenance to orphan
  • From: Venkatraman S <svenkatr@xxxxxxxxx>
• [PATCH 0/3] OMAPDSS: Panel NEC: backlight handling changes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/3] OMAPDSS: Panel NEC: Set backlight type to remove boot time warning
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/3] OMAPDSS: Panel NEC: Get rid of nec_80848_data structure
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/3] OMAPDSS: Panel NEC: Only register backlight when we have valid callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/2] pwm: pwm-tiehrpwm: Low power sleep support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• RE: [PATCH v4 0/3] mtd: nand: OMAP: ELM error correction support for BCH ecc
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• RE: [PATCH 1/2] pwm: pwm-tiehrpwm: Low power sleep support
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• RE: [PATCH 2/2] pwm: pwm-tiecap: Low power sleep support
  • From: "Philip, Avinash" <avinashphilip@xxxxxx>
• Re: Does USB isochronous mode work on EHCI port?
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: McBSP functions not exported
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: McBSP functions not exported
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Help wanted with USB and OMAP3 off_mode
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v2 12/12] video: da8xx-fb: set upstream clock rate (if reqd)
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] crypto: omap-sham - Fix compile errors when CONFIG_OF not defined
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] mtd: omap-onenand: pass device_node in platform data
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• [PATCH] crypto: omap-sham - Fix compile errors when CONFIG_OF not defined
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• [PATCH v5 00/14] DMA Engine support for AM33XX
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 01/14] ARM: davinci: move private EDMA API to arm/common
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 02/14] ARM: edma: remove unused transfer controller handlers
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 04/14] dmaengine: edma: enable build for AM33XX
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 06/14] ARM: dts: add AM33XX EDMA support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 03/14] ARM: edma: add AM33XX support to the private EDMA API
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 05/14] dmaengine: edma: Add TI EDMA device tree binding
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 07/14] dmaengine: add dma_request_slave_channel_compat()
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 11/14] ARM: dts: add AM33XX MMC support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 08/14] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 10/14] mmc: omap_hsmmc: add generic DMA request support to the DT binding
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 12/14] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 09/14] mmc: omap_hsmmc: set max_segs based on dma engine limitations
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 14/14] ARM: dts: add AM33XX SPI DMA support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v5 13/14] spi: omap2-mcspi: add generic DMA request support to the DT binding
  • From: Matt Porter <mporter@xxxxxx>
• Re: McBSP functions not exported
  • From: Paul Barker <paul@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/5] mtd: omap-nand: pass device_node in platform data
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH v8 2/5] mtd: omap-nand: pass device_node in platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 2/5] mtd: omap-nand: pass device_node in platform data
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Allow DMA controller to prefetch data
  • From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 2/5] mtd: omap-nand: pass device_node in platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: AM33XX: clock: SET_RATE_PARENT in lcd path
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• RE: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: "B, Ravi" <ravibabu@xxxxxx>
• Re: [PATCH v2 12/12] video: da8xx-fb: set upstream clock rate (if reqd)
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part of control module
  • From: kishon <kishon@xxxxxx>
• Re: [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: kishon <kishon@xxxxxx>
• RE: [PATCH 08/10] video: da8xx-fb: obtain fb_videomode info from dt
  • From: "Mohammed, Afzal" <afzal@xxxxxx>
• [PATCH v2 2/5] ARM: dts: AM33XX: Add am335x-evm lcdc panel timings
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 0/5] ARM: dts: AM33XX: lcdc support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 1/5] ARM: dts: AM33XX: Add lcdc node
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 3/5] ARM: dts: AM33XX: Add am335x-evm lcdc pincontrol info
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 4/5] ARM: dts: AM33XX: Add am335x-evmsk lcdc panel timings
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 5/5] ARM: dts: AM33XX: Add am335x-evmsk lcdc pincontrol info
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 00/12] video: da8xx-fb: DT support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 01/12] video: da8xx-fb: make io operations safe
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 02/12] video: da8xx-fb: fix 24bpp raster configuration
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 03/12] video: da8xx-fb: enable sync lost intr for v2 ip
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v2 05/12] video: da8xx-fb: ensure non-null cfg in pdata
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 04/12] video: da8xx-fb: use devres
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 12/12] video: da8xx-fb: set upstream clock rate (if reqd)
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 07/12] video: da8xx-fb: minimal dt support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 06/12] video: da8xx-fb: reorganize panel detection
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 08/12] video: da8xx-fb: invoke platform callback safely
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 09/12] video: da8xx-fb: obtain fb_videomode info from dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 10/12] video: da8xx-fb: ensure pdata only for non-dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v2 11/12] video: da8xx-fb: setup struct lcd_ctrl_config for dt
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 02/10] video: da8xx-fb: simplify lcd_reset
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 03/10] video: da8xx-fb: use modedb helper to update var
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 01/10] video: da8xx-fb: fb_check_var enhancement
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH] ARM: AM33XX: clock: SET_RATE_PARENT in lcd path
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 04/10] video: da8xx-fb: remove unneeded "var" initialization
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 06/10] video: da8xx-fb: store clk rate even if !CPUFREQ
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 05/10] video: da8xx-fb: store current display information
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 07/10] video: da8xx-fb: pix clk and clk div handling cleanup
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 08/10] video: da8xx-fb: store struct device *
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 09/10] video: da8xx-fb: report correct pixclock
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 10/10] video: da8xx-fb: fb_set_par support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH v3 00/10] video: da8xx-fb: runtime timing configuration
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part of control module
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] usb: dwc3: Remove dwc3 dependency on host AND gadget.
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC PATCH 4/7] drivers: usb: start using the control module driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 7/7] ARM: dts: omap: Add omap control usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 6/7] ARM: dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 0/7] usb: musb: add driver for control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 3/7] ARM: OMAP2: MUSB: Specify omap4 has mailbox
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part of control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 5/7] ARM: dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 00/10] MFD: twl-core: Cleanup part 2 for 3.9
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/2] OMAP3 ISP: Simplify clock usage
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH REBASE 0/6] i2c: omap: misc changes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• 3.4 versus 3.8
  • From: "Graham, Jeff" <Jeff.Graham@xxxxxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc3
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v8 5/5] ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP baseline test results for v3.8-rc3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Fwd: Workaround for hanging u-boot 'Load Address: fffffff2'
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Fwd: Workaround for hanging u-boot 'Load Address: fffffff2'
  • From: Kiril Maler <kiril.maler@xxxxxxxxx>
• Re: McBSP functions not exported
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] pwm: pwm-tiecap: Low power sleep support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] pwm: pwm-tiehrpwm: Low power sleep support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [RFC-v2 1/7] capebus: Core capebus support
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC-v2 0/7] Capebus; a bus for SoCs using simple expansion connectors
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 5/5] ARM: OMAP4+: HDMI: Refine the DMA port resource for audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 1/5] ARM: OMAP4+: HDMI: Rename platform devices for ASoC drivers
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: Querry on UART wakeup on Linux 3.8-rc1
  • From: <Madhusudhan.Gowda@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: clock/hwmod data: remove MODULEMODE entries in mux + gate combos
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH] Don't mark shared helper functions as inline
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• 3.8-rc3: DMA?: WARNING: at mm/percpu-vm.c:318 pcpu_alloc+0x93c/0xa20()
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 00/14] DMA Engine support for AM33XX
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] enable multiplatform support for omap2+ for v3.9
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] enable multiplatform support for omap2+ for v3.9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 00/14] DMA Engine support for AM33XX
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH v4,03/14] ARM: edma: add AM33XX support to the private EDMA API
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• Re: [PATCH v4,03/14] ARM: edma: add AM33XX support to the private EDMA API
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: OMAP2+: Add PMU nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] ARM: OMAP2+: Prepare for device-tree PMU support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 11/14] ARM: dts: add AM33XX MMC support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 10/14] mmc: omap_hsmmc: add generic DMA request support to the DT binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 09/14] mmc: omap_hsmmc: set max_segs based on dma engine limitations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 08/14] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 07/14] dmaengine: add dma_request_slave_channel_compat()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: OMAP3: Add support for OMAP3430 SDP board
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: McBSP functions not exported
  • From: Paul Barker <paul@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v4 05/14] dmaengine: edma: Add TI EDMA device tree binding
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH v4 01/14] ARM: davinci: move private EDMA API to arm/common
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: OMAP2+: Add PMU nodes
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH RFC] usb: dwc3: Remove dwc3 dependency on gadget.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH 1/9] mailbox: OMAP: introduce mailbox framework
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxxxxxx>
• Re: [PATCH V2 2/2] ARM: dts: OMAP2+: Add PMU nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: McBSP functions not exported
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/4] RFC: drm/lcdc: add support for LCD panels (v2)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• McBSP functions not exported
  • From: Paul Barker <paul@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/14] DMA Engine support for AM33XX
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix the use of uninitialized dma_lch_count
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] arch/arm/plat-omap: initializing dma_lch_count, before judging omap_dma_reserve_channels
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• RE: [PATCH v4 1/4] rtc: OMAP: Add system pm_power_off to rtc driver
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• Re: [RFC 0/4] TI LCDC DRM driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH v4 1/4] rtc: OMAP: Add system pm_power_off to rtc driver
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• Re: [PATCH v4 1/4] rtc: OMAP: Add system pm_power_off to rtc driver
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCH] staging/omapdrm: garbage collect OMAP_DSS_DISPLAY_SUSPENDED
  • From: Paolo Pisati <p.pisati@xxxxxxxxx>
• Re: [PATCH v4 1/4] rtc: OMAP: Add system pm_power_off to rtc driver
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCH v4 3/4] ARM: dts: AM33XX: Enable system power off control in am335x-bone
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCH v4 0/4] pm: Add power off control
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCH v4 4/4] ARM: OMAP2+: omap2plus_defconfig: Enable RTC support
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• Re: [PATCH v4 2/4] ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone
  • From: Russ Dill <russ.dill@xxxxxxxxx>
• RE: [PATCH v4 05/14] dmaengine: edma: Add TI EDMA device tree binding
  • From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
• Re: [PATCH] arch/arm/plat-omap: initializing dma_lch_count, before judging omap_dma_reserve_channels
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v4 01/14] ARM: davinci: move private EDMA API to arm/common
  • From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
• [PATCH v4 08/14] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 11/14] ARM: dts: add AM33XX MMC support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 03/14] ARM: edma: add AM33XX support to the private EDMA API
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 05/14] dmaengine: edma: Add TI EDMA device tree binding
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 00/14] DMA Engine support for AM33XX
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 02/14] ARM: edma: remove unused transfer controller handlers
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 01/14] ARM: davinci: move private EDMA API to arm/common
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 06/14] ARM: dts: add AM33XX EDMA support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 04/14] dmaengine: edma: enable build for AM33XX
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 07/14] dmaengine: add dma_request_slave_channel_compat()
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 10/14] mmc: omap_hsmmc: add generic DMA request support to the DT binding
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 09/14] mmc: omap_hsmmc: set max_segs based on dma engine limitations
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 13/14] spi: omap2-mcspi: add generic DMA request support to the DT binding
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 12/14] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH v4 14/14] ARM: dts: add AM33XX SPI DMA support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH] ARM: OMAP: Fix the use of uninitialized dma_lch_count
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• Re: [PATCH] arch/arm/plat-omap: initializing dma_lch_count, before judging omap_dma_reserve_channels
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• Re: [PATCH] arch/arm/plat-omap: initializing dma_lch_count, before judging omap_dma_reserve_channels
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• RE: [RFC v2 12/18] ARM: OMAP2+: timer: Add suspend-resume callbacks for clockevent device
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [RFC 0/4] TI LCDC DRM driver
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH] OMAPDSS: HDMI: Rework function to calculate N/CTS params
  • From: Ricardo Neri <rneri@xxxxxxxxxxxxxx>
• Re: [RFC 0/4] TI LCDC DRM driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 02/16] ARM: davinci: move private EDMA API to arm/common
  • From: Matt Porter <mporter@xxxxxx>
• Re: [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH] ARM: OMAP2: Fix missing omap2xxx_clkt_vps_xxx function calls
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support
  • From: Matt Porter <mporter@xxxxxx>
• [PATCH] staging/omapdrm: garbage collect OMAP_DSS_DISPLAY_SUSPENDED
  • From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
• Re: OMAP baseline test results for v3.8-rc2
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC PATCH v3 13/16] ARM: dts: add AM33XX MMC support
  • From: Matt Porter <mporter@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Enable SDIO IRQ using a GPIO in idle mode.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH for 3.8] ARM: OMAP: zoom-display: Remove the use of TWL4030_MODULE_PWM1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP baseline test results for v3.8-rc2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support
  • From: Nishanth Menon <nm@xxxxxx>