On Fri, Jan 25, 2013 at 7:19 AM, Mohammed, Afzal <afzal@xxxxxx> wrote:
> Hi Rob,
>
> On Wed, Jan 23, 2013 at 04:06:22, Rob Clark wrote:
>
>> A simple DRM/KMS driver for the TI LCD Controller found in various
>> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
>
>> +void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
>
>> + /* in raster mode, minimum divisor is 2: */
>> + ret = clk_set_rate(priv->disp_clk, crtc->mode.clock * 1000 * 2);
>
> These things can better be handled with divider clock having a
> minimum value (being discussed with Mike on how exactly it should
> be) and instead of setting rate over a platform specific clock,
> you can set rate over lcd clock using SET_RATE_PARENT at platform
> level, more below,
I looked at that patch you were proposing for da8xx-fb.. to be
honest, it did not seem simpler to me, so I was sort of failing to see
the benefit..
>> + /* Configure the LCD clock divisor. */
>> + tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(div) |
>> + LCDC_RASTER_MODE);
>> +
>> + if (priv->rev == 2)
>> + tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
>> + LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
>> + LCDC_V2_CORE_CLK_EN);
>
> Mike was suggesting to model the above using gate/divider/composite
> clocks of CCF in the FB driver.
>
>> + priv->clk = clk_get(dev->dev, "fck");
>> + if (IS_ERR(priv->clk)) {
>> + dev_err(dev->dev, "failed to get functional clock\n");
>> + ret = -ENODEV;
>> + goto fail;
>> + }
>> +
>> + priv->disp_clk = clk_get(dev->dev, "dpll_disp_ck");
>> + if (IS_ERR(priv->clk)) {
>> + dev_err(dev->dev, "failed to get display clock\n");
>> + ret = -ENODEV;
>> + goto fail;
>> + }
>
> "dpll_disp_ck" is a platform specific matter, driver should not
> be handling platform specifics. And this won't work on DaVinci,
> you can probably make use of
meaning the clock has a different name on davinci, or? Presumably
there must be some clock generating the pixel clock for the display,
but I confess to not being too familiar with the details on davinci..
BR,
-R
> my series "[PATCH v2 0/4] ARM: AM335x: LCDC platform support"
>
> or something similar to overcome this.
>
> Regards
> Afzal
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
