Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v2 2/2] crypto: omap-des: Add config and build options
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] mmc: omap_hsmmc: Add support for quirky omap3 hsmmc controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 3/4] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 0/4]
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v4 4/4] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v4 3/4] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v4 2/4] ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v4 1/4] ARM: dts: omap3: Add support for INCOstartec a83x module
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: dts: use ti,fixed-factor-clock for dpll4_m4x2_mul_ck
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 7/8] ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 7/8] ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 6/8] ARM: dts: use ti,fixed-factor-clock for dpll4_m4x2_mul_ck
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 5/8] ARM: dts: fix DPLL4 x2 clkouts on 3630
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/8] ARM: dts: fix omap3 dss clock handle names
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/8] clk: divider: fix rate calculation for fractional rates
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: OMAP3+: DPLL: stop reparenting to same parent if already done
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 00/26] OMAP dma engine rework
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v7 01/12] mfd: omap-usb-host: Use resource managed clk_get()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/6] net: cpsw: Add control-module macid driver
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] net: cpsw: Use cpsw-ctrl-macid driver
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/2] OMAPDSS: Remove unused get_context_loss_count support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/2] OMAPDSS: use DISPC register to detect context loss
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 0/2] mmc: omap_hsmmc: fix for pre es3.0 OMAP3
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 1/2] mmc: omap_hsmmc: Add support for quirky omap3 hsmmc controller
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V2 2/2] ARM: dts: omap3-ldp: fix mmc configuration
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] mmc: omap_hsmmc: fix sparse/smatch warning for paranthesis
  • From: Nishanth Menon <nm@xxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] [RESEND] ARM/dts: hdmi-codec: panda/es dt entries
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] ARM: dts: Fixes for Overo/Tobi against 3.14-rc2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove legacy macros for zoom platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove MACH_NOKIA_N800
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: N9/N950: fix boot hang with 3.14-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: nokia770: enable tahvo-usb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3+: DPLL: stop reparenting to same parent if already done
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/9] ARM: dts: omap3-gta04: Fix mmc1 properties.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/9] ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP2+: fix dpll round_rate() to actually round
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: add missing ARCH_HAS_OPP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap1: fix build when !CONFIG_OMAP_32K_TIMER
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: DTS: am335x-evmsk: Audio and MMC1 fix (for 3.13?)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-gta04: Add EOC irq gpio line handling.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Issues with GPIO and wake from sleep
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] arm: dts: am335x beagle bone use processor macids
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] net: cpsw: Add control-module macid driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] net: cpsw: Use cpsw-ctrl-macid driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: OMAP5: Add IOMMU nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 3/4] ARM: dts: OMAP4: Add IOMMU nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/4] ARM: dts: OMAP3: Add IVA IOMMU node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/4] ARM: dts: OMAP3: Update ISP IOMMU node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/4] OMAP IOMMU DTS nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 08/16] ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 13/16] ARM: OMAP2+: extend iommu pdata-quirks to OMAP5
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 11/16] ARM: OMAP3: fix iva mmu programming issues
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 15/16] ARM: OMAP4: hwmod data: cleanup data for IOMMUs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 04/16] iommu/omap: add devicetree support
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 16/16] ARM: OMAP2+: Remove legacy omap-iommu.c
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 14/16] ARM: OMAP3: hwmod data: cleanup data for IOMMUs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 09/16] ARM: OMAP2+: change the ISP device archdata MMU name
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 05/16] iommu/omap: enable bus-error back on supported iommus
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 03/16] Documentation: dt: add OMAP iommu bindings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 10/16] ARM: OMAP2+: use pdata quirks for iommu reset lines
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 06/16] iommu/omap: allocate archdata on the fly for DT-based devices
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 00/16] OMAP IOMMU DT adaptation and cleanup
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 12/16] ARM: OMAP5: hwmod data: add mmu data for ipu & dsp
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 02/16] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 01/16] iommu/omap: convert to devm_* interfaces
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 07/16] iommu/omap: allow enable/disable even without pdata
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] ARM: OMAP4: sleep: byteswap data for big-endian
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/26] OMAP dma engine rework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] [RESEND] ARM/dts: hdmi-codec: panda/es dt entries
  • From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
• [PATCH] ARM/dts: hdmi-codec: panda/es dt entries
  • From: Paolo Pisati <paolo.pisati@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 2/4] ARM: dts: omap3-tobi: Use the correct vendor prefix
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/4] ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/8] OMAP: OMAP3 DSS related clock patches
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH 3/8] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v2 3/4] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 1/4] ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 4/4] Documentation: dt: OMAP: Update Overo/Tobi
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 2/4] ARM: dts: omap3-tobi: Use the correct vendor prefix
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH v2 0/4] ARM: dts: Fixes for Overo/Tobi against 3.14-rc2
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 7/8] ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/8] clk: divider: fix rate calculation for fractional rates
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 8/8] OMAPDSS: fix rounding when calculating fclk rate
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/8] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/8] ARM: dts: fix DPLL4 x2 clkouts on 3630
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 6/8] ARM: dts: use ti,fixed-factor-clock for dpll4_m4x2_mul_ck
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/8] ARM: dts: fix omap3 dss clock handle names
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/8] clk: ti/divider: fix rate calculation for fractional rates
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/8] OMAP: OMAP3 DSS related clock patches
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] serial: omap-serial: Move info message to probe function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/4] clk: ti: omap4: set default-parents and default-rates using DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/4] clk: add support for default-rate
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/4] clk: ti: mux: add support for default-parenting
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/4] clk: ti: add support for default-rate property from DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/4] clk: dt: add support for default rate/parent
  • From: Tero Kristo <t-kristo@xxxxxx>
• RE: [PATCH v1 0/5] add parallel NAND support for TI's new OMAPx and AMxx platforms
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 2/4] power_supply: Introduce generic psy charging driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: OMAP3 ISP capabilities
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: OMAP3 ISP capabilities
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• OMAP3 ISP capabilities, resizer
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP5: add pmu node
  • From: Nathan Lynch <Nathan_Lynch@xxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: dts: OMAP5: add pmu node
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: dts: sbc-t3x: add support for more boards
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [PATCH v1 1/2] mtd: nand: omap: fix ecclayout->oobfree->offset
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH 2/4] power_supply: Introduce generic psy charging driver
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 07/12] ARM: dts: omap5: Update omap-usb-host node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 05/12] mfd: omap-usb-tll: Update DT clock binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 01/12] mfd: omap-usb-host: Use resource managed clk_get()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 00/12] USB Host support for OMAP5 uEVM
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 06/12] ARM: dts: omap4: Update omap-usb-host node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 04/12] mfd: omap-usb-host: Update DT clock binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 09/12] ARM: dts: omap5-uevm: Provide USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 08/12] ARM: dts: omap4-panda: Provide USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 11/12] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 10/12] ARM: OMAP2+: Remove legacy_init_ehci_clk()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 12/12] usb: omap: dts: Update DT binding example usage
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] ARM: OMAP2+: Remove legacy macros for zoom platforms
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP5: add pmu node
  • From: Nathan Lynch <Nathan_Lynch@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: N900: add missing compatible property
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: N9/N950: fix boot hang with 3.14-rc1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-n9 family: mark proper OMAP version
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-n9 family: mark proper OMAP version
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 0/3] ARM: dts: Fixes for Overo/Tobi against 3.14-rc1
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• OMAP3 ISP capabilities (fwd)
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• [PATCH] ARM: dts: omap3-n9 family: mark proper OMAP version
  • From: Nishanth Menon <nm@xxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• OMAP3 ISP capabilities
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/3] ARM: dts: Fixes for Overo/Tobi against 3.14-rc1
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 5/5] mt9p031: Add support for PLL bypass
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 2/5] mt9t001: Add regulator support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 3/5] mt9t001: Add clock support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] mt9p031: Fix typo in comment
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 0/5] mt9t001 and mt9p031 sensors drivers patches
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: omap2: cm-t35: Add regulators and clock for camera sensor
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig
  • From: Nishanth Menon <nm@xxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv4 0/7] omap hwspinlock dt support
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCHv4 4/7] hwspinlock/core: add common OF helpers
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Roger Quadros <rogerq@xxxxxx>
• OMAP baseline test results for v3.14-rc2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: dts: OMAP2+: Fix boot with multi_v7_defconfig
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Nishanth Menon <nm@xxxxxx>
• Re: OMAP baseline test results for v3.14-rc1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP baseline test results for v3.14-rc1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Roger Quadros <rogerq@xxxxxx>
• OMAP baseline test results for v3.14-rc1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: next boot: 36 pass, 3 fail (next-20140210)
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: next boot: 36 pass, 3 fail (next-20140210)
  • From: Nishanth Menon <nm@xxxxxx>
• Re: next boot: 36 pass, 3 fail (next-20140210)
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Nishanth Menon <nm@xxxxxx>
• Re: regression(ti platforms): next-20140210 (ehci?)
  • From: Roger Quadros <rogerq@xxxxxx>
• regression(ti platforms): next-20140210 (ehci?)
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 22/26] ARM: omap: move dma channel allocation into plat-omap code
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 26/26] dmaengine: omap-dma: more consolidation of CCR register setup
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 25/26] dmaengine: omap-dma: move IRQ handling to omap-dma
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 24/26] dmaengine: omap-dma: move register read/writes into omap-dma.c
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 23/26] ARM: omap: dma: get rid of 'p' allocation and clean up
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 21/26] ARM: omap: dma: get rid of errata global
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 20/26] ARM: omap: clean up DMA register accesses
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 19/26] ARM: omap: remove almost-const variables
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 18/26] ARM: omap: remove references to disable_irq_lch
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 17/26] dmaengine: omap-dma: cleanup errata 3.3 handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 16/26] dmaengine: omap-dma: provide register read/write functions
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 15/26] dmaengine: omap-dma: use cached CCR value when enabling DMA
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 14/26] dmaengine: omap-dma: move barrier to omap_dma_start_desc()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 13/26] dmaengine: omap-dma: move clnk_ctrl setting to preparation functions
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 12/26] dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 11/26] dmaengine: omap-dma: consolidate clearing channel status register
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 10/26] dmaengine: omap-dma: move CCR buffering disable errata out of the fast path
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 09/26] dmaengine: omap-dma: provide register definitions
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 08/26] dmaengine: omap-dma: consolidate setup of CCR
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 07/26] dmaengine: omap-dma: consolidate setup of CSDP
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 06/26] dmaengine: omap-dma: move reading of dma position to omap-dma.c
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 05/26] dmaengine: omap-dma: control start/stop directly
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 04/26] dmaengine: omap-dma: consolidate writes to DMA registers
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 03/26] dmaengine: omap-dma: program hardware directly
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 02/26] dmaengine: omap-dma: provide a hook to get the underlying DMA platform ops
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 01/26] dmaengine: omap-dma: use devm_kzalloc() to allocate omap_dmadev.
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 00/26] OMAP dma engine rework
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv5] omap3: Add basic support for 720MHz part
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv5] omap3: Add basic support for 720MHz part
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 00/17] i2c: deprecate class based instantiation for embedded I2C drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 03/17] i2c: i2c-omap: deprecate class based instantiation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 28/28] Remove LOCAL_TIMERS
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• OMAP baseline test results for v3.13
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove MACH_NOKIA_N800
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 28/28] Remove LOCAL_TIMERS
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH] ARM: OMAP2+: Remove MACH_NOKIA_N800
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: N900: add missing compatible property
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 1/2] ARM: dts: N9/N950: fix boot hang with 3.14-rc1
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH] ARM: OMAP1: nokia770: enable tahvo-usb
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCHv4 4/7] hwspinlock/core: add common OF helpers
  • From: Bjorn Andersson <bjorn@xxxxxxx>
• [RFC PATCH] ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [RFC PATCH] ARM: OMAP2+: Re-enable SW_SLEEP for clockdomains
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v2 3/4] Regulators: TPS65218: Add Regulator driver for TPS65218 PMIC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/4] Regulators: TPS65218: Add Regulator driver for TPS65218 PMIC
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCHv5] omap3: Add basic support for 720MHz part
  • From: Nishanth Menon <nm@xxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 2/4] MFD: TPS65218: Add driver for the TPS65218 PMIC
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH v2 2/4] MFD: TPS65218: Add driver for the TPS65218 PMIC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH V2 3/4] ARM: OMAP2+: AM43x: determine features
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH V2 0/4] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH V2 2/4] ARM: OMAP2+: AM43x: Add ID for ES1.1
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH V2 1/4] ARM: OMAP2+: AM43x: enable in default config
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v3 0/4] ARM: add omap3 INCOstartec board support
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: AM43x: Add ID for ES1.1
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCHv5] omap3: Add basic support for 720MHz part
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] MFD: TPS65218: Add driver for the TPS65218 PMIC
  • From: Keerthy <a0393675@xxxxxx>
• AM3517 EVM
  • From: Marc Murphy <marcmltd@xxxxxxxxxxx>
• [PATCH] ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/3] ARM: OMAP2+: AM43x: Add ID for ES1.1
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 2/4] MFD: TPS65218: Add driver for the TPS65218 PMIC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/3] ARM: dts: omap3-tobi: Use the correct vendor prefix
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 1/3] ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 3/3] ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 0/3] ARM: dts: Fixes for Overo/Tobi against 3.14-rc1
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• [PATCH 2/3] ARM: OMAP2+: AM43x: Add ID for ES1.1
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 3/3] ARM: OMAP2+: AM43x: Use gptimer as clocksource
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 1/3] ARM: OMAP2+: AM43x: Enable in default config
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 0/3] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH 0/3] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 2/4] MFD: TPS65218: Add driver for the TPS65218 PMIC
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 4/4] ARM: dts: AM43x: Add dts nodes of TPS65218 PMIC
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 3/4] Regulators: TPS65218: Add Regulator driver for TPS65218 PMIC
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 1/4] mfd: DT bindings for TPS65218 PMIC
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/4] [PATCH v2 0/4] MFD: TPS65218: Drivers for TPS65218 PMIC.
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2 3/5] char: ti-usim: Add driver for USIM module on AM43xx
  • From: Satish Patel <satish.patel@xxxxxx>
• Re: Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• RE: Issues with GPIO and wake from sleep
  • From: Marc Murphy <marcmltd@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v3 0/6] IIO pulse capture support for TI ECAP
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/6] iio: add support for pulse width capture devices
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v3 4/6] iio: Add ABI docs for pulse capture devices
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v3 2/6] iio: pulse: add TI ECAP driver
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v3 6/6] ARM: dts: AM33XX: Add ecap interrupt properties
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v3 3/6] iio: enable selection and build of pulse drivers
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v3 5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v3 0/6] IIO pulse capture support for TI ECAP
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/3] arm: dts: am33xx.dtsi: Add node name to rtc device node
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  • From: Illia Smyrnov <illia.smyrnov@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH] mtd:elm: Use correct check on return value of pm_runtime_get_sync
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] mtd:elm: Use correct check on return value of pm_runtime_get_sync
  • From: Stefan Sørensen <stefan.sorensen@xxxxxxxxxxxxxxx>
• [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi
  • From: Jack Mitchell <ml@xxxxxxxxxxx>
• Re: omapfb segfaults
  • From: Grant <emailgrant@xxxxxxxxx>
• [PATCH v1 5/5] ARM: dts: am43xx: add support for parallel NAND flash
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 4/5] ARM: dts: dra7: add support for parallel NAND flash
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 3/5] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 2/5] ARM: dts: am335x-evm: NAND: update MTD partition table
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 1/5] ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH v1 0/5] add parallel NAND support for TI's new OMAPx and AMxx platforms
  • From: Pekon Gupta <pekon@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Sricharan R <r.sricharan@xxxxxx>
• [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 3/3] arm: dts: Add Siemens am335x-dxr2-e.dts
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 2/3] arm: dts: Add Siemens Draco SOM dtsi
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH 1/3] arm: dts: am33xx.dtsi: Add node name to rtc device node
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH] ARM: OMAP3+: DPLL: stop reparenting to same parent if already done
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/4] power_supply: Introduce generic psy charging driver
  • From: Jenny Tc <jenny.tc@xxxxxxxxx>
• RE: Issues with GPIO and wake from sleep
  • From: Marc Murphy <marcmltd@xxxxxxxxxxx>
• Re: omapfb segfaults
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/2] usb: musb: host: fixes for 3.14-rc
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/2] usb: musb: host: fixes for 3.14-rc
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-ldp: fix mmc configuration
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] usb: musb: host: fixes for 3.14-rc
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/2] usb: musb: core: Fix remote-wakeup resume
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/2] usb: musb: host: Fix SuperSpeed hub enumeration
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 3/5] char: ti-usim: Add driver for USIM module on AM43xx
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] ARM: dts: omap3-ldp: fix mmc configuration
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH/RFC] dmaengine: omap-dma: split header file
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH 3/4] power_supply: Introduce PSE compliant algorithm
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/4] power_supply: Introduce generic psy charging driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Pavel Machek <pavel@xxxxxx>
• RE: [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH v10 0/7] mmc: omap_hsmmc: pbias dt and cleanup
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/4] power_supply: Introduce generic psy charging driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 3/4] power_supply: Introduce PSE compliant algorithm
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 1/4] power_supply: Add inlmt,iterm, min/max temp props
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH v5 0/4] power_supply: Introduce power supply charging driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• omapfb: resizing video doesn't work
  • From: Grant <emailgrant@xxxxxxxxx>
• Re: omapfb segfaults
  • From: Grant <emailgrant@xxxxxxxxx>
• v3.14-rc1 boot status
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v2 0/6] IIO pulse capture support for TI ECAP
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v2 1/6] iio: add support for pulse width capture devices
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v2 2/6] iio: pulse: add TI ECAP driver
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v2 4/6] iio: Add ABI docs for pulse capture devices
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v2 3/6] iio: enable selection and build of pulse drivers
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v2 5/6] pwm: enable TI PWMSS if the IIO tiecap driver is selected
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH v2 6/6] ARM: dts: AM33XX: Add ecap interrupt properties
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
  • From: Sricharan R <r.sricharan@xxxxxx>
• omapfb segfaults
  • From: Grant <emailgrant@xxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: power_supply mailing list
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [RFC/PATCH] base: platform: add generic clock handling for platform-bus
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH] base: platform: add generic clock handling for platform-bus
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH] base: platform: add generic clock handling for platform-bus
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH] base: platform: add generic clock handling for platform-bus
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [RFC/PATCH] base: platform: add generic clock handling for platform-bus
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Jenny Tc <jenny.tc@xxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 0/5] Smart Card(SC) interface, TI USIM & NxP SC phy driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [patch] mmc: omap_hsmmc: precedence bug in omap_hsmmc_context_restore()
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [patch 2/2] mmc: omap_hsmmc: checking for ERR_PTR instead of NULL
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [patch 1/2] mmc: omap_hsmmc: remove a duplicative test
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [patch 2/2] mmc: omap_hsmmc: checking for ERR_PTR instead of NULL
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [patch] mmc: omap_hsmmc: precedence bug in omap_hsmmc_context_restore()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch 1/2] mmc: omap_hsmmc: remove a duplicative test
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• power_supply mailing list
  • From: Jenny Tc <jenny.tc@xxxxxxxxx>
• [PATCH 1/4] power_supply: Add inlmt,iterm, min/max temp props
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 3/4] power_supply: Introduce PSE compliant algorithm
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 2/4] power_supply: Introduce generic psy charging driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH v4 0/4] power_supply: Introduce power supply charging driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 0/5] Smart Card(SC) interface, TI USIM & NxP SC phy driver
  • From: Satish Patel <satish.patel@xxxxxx>
• [PATCH 3/4] ARM: dts: OMAP5: Add device nodes for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/4] ARM: dts: OMAP4: Add device nodes for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/4] ARM: dts: OMAP36xx: Add device node for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/4] ARM: dts: DRA7: Add device nodes for ABB
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: OMAP3+: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/5] iio: add support for pulse width capture devices
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH 0/5] IIO pulse capture support for TI ECAP
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH 2/5] iio: pulse: add TI ECAP driver
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH 4/5] pwm: enable TI PWMSS if the IIO tiecap driver is selected
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH 5/5] ARM: dts: AM33XX: Add ecap interrupt properties
  • From: Matt Porter <mporter@xxxxxxxxxx>
• [PATCH 3/5] iio: enable selection and build of pulse drivers
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: OMAP3+: add clock nodes for CPU
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 1/2] clk: ti: am335x: remove unecessary cpu0 clk node
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] ARM: dts: OMAP3+: add clock nodes for CPU
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] ARM: dts/OMAP: add cpu clock nodes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: OMAP5: add pmu node
  • From: Nathan Lynch <nathan_lynch@xxxxxxxxxx>
• Re: [PATCH 0/6] N900 DTS additions for 3.14
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH 0/6] N900 DTS additions for 3.14
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/6] N900 DTS additions for 3.14
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: OMAP: clock DT conversion issues with omap36xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add basic devices for AM3517-craneboard
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: add missing ARCH_HAS_OPP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• OMAP: clock DT conversion issues with omap36xx
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] power_supply: Introduce Generic Power Supply charging driver
  • From: Jenny Tc <jenny.tc@xxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Jenny Tc <jenny.tc@xxxxxxxxx>
• Re: [PATCH 1/4] power_supply: Add inlmt,iterm, min/max temp props
  • From: Jenny Tc <jenny.tc@xxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH RFC v3 4/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• RE: [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: [PATCH V2] regulator: fixed: update to devm_* API
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH] ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
  • From: Pekon Gupta <pekon@xxxxxx>
• [PATCH V2] regulator: fixed: update to devm_* API
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: ethernet support for OMAP5 UEVM
  • From: Nathan Lynch <Nathan_Lynch@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v3 4/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC v3 3/8] ASoC: davinci-mcasp: Set BCLK divider if McASP is BCLK master
  • From: Mark Brown <broonie@xxxxxxxxxx>
• ethernet support for OMAP5 UEVM
  • From: Nathan Lynch <Nathan_Lynch@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4+: move errata initialization to omap4_pm_init_early
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH RFC v3 2/8] ASoC: davinci-evm: Add named clock reference to DT bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• [BISECTED] OMAP: DSS: clk rate mismatch
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH RFC v3 6/8] drm/tilcdc: Add I2C HDMI audio config for tda998x
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 8/8] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 3/8] ASoC: davinci-mcasp: Set BCLK divider if McASP is BCLK master
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 7/8] ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI support
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 1/8] clk: add gpio controlled clock
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 5/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 4/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 2/8] ASoC: davinci-evm: Add named clock reference to DT bindings
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: fixed: Use devm_regulator_register
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• [PATCH 4/4] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: dts: omap3: Add support for INCOstartec a83x module
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] ARM: add omap3 INCOstartec board support
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] ARM: dts: omap3: Add support for INCOstartec a83x module
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: fixed: Use devm_regulator_register
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCHv3 00/41] OMAPDSS: DT support v3
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH] regulator: fixed: Use devm_regulator_register
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH V2] max8925_power: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/4] power_supply: Introduce PSE compliant algorithm
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 0/9] ARM: dts: omap3-gta04: Various devicetree updates.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 1/9] ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 4/9] ARM: dts: omap3-gta04: Enable mmc2 for wifi.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 3/9] ARM: dts: omap3-gta04: Fix mmc1 properties.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 5/9] ARM: dts: omap3-gta04: Add basic sound support.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/9] ARM: dts: omap3-gta04: Add bma180 accelerometer.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 6/9] ARM: dts: omap3-gta04: Add twl4030 charger.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 7/9] ARM: dts: omap3-gta04: Add touchscreen properties.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 9/9] ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 8/9] ARM: dts: omap3-gta04: Add support for magnetometer.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH] regulator: fixed: Use devm_regulator_register
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• Re: [PATCH 2/4] power_supply: Introduce Generic Power Supply charging driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v1 2/2] mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v1 1/2] mtd: nand: omap: fix ecclayout->oobfree->offset
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v1 0/2] mtd: nand: omap: booting from NAND using u-boot
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCHv2 0/5] wl1251 device tree support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/5] wl1251 device tree support
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/5] wl1251 device tree support
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] serial: omap-serial: Move info message to probe function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] serial: omap-serial: Move info message to probe function
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH/RFC] dmaengine: omap-dma: split header file
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH/RFC] dmaengine: omap-dma: split header file
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH 1/4] power_supply: Add inlmt,iterm, min/max temp props
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 1/4] power_supply: Add inlmt,iterm, min/max temp props
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [alsa-devel] [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCHv3 30/41] ARM: omap3-n900.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/2] ARM: omapfb: add coherent dma memory support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH 1/2] ARM: omapfb: add coherent dma memory support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH 9/9] ARM: DTS: am335x-evmsk: Correct audio clock frequency
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 7/9] ARM: DTS: omap3: Set disabled status for McBSP instances as default state
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 8/9] ARM: DTS: omap2: Set disabled status for McBSP instances as default state
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 6/9] ARM: DTS: omap5: Set all audio related IP's status to disabled as default
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 5/9] ARM: DTS: omap4-sdp: No need to disable mcbsp3 node
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 4/9] ARM: DTS: omap4-panda-common: No need to disable the unused audio nodes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/9] ARM: DTS: omap4: Set all audio related IP's status to disabled as default
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/9] ARM: DTS: omap4-panda-common: Move audio related pinmux to respective nodes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/9] ARM: DTS: omap4-sdp: Move audio related pinmux to respective nodes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/9] ARM: DTS: OMAP: Audio related cleanups for dtsi and dts files
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [net-next PATCH v2 1/1] drivers: net: cpsw: enable promiscuous mode support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4+: move errata initialization to omap4_pm_init_early
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4+: move errata initialization to omap4_pm_init_early
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Nishanth Menon <nm@xxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: [PATCH] ARM: OMAP4+: move errata initialization to omap4_pm_init_early
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/3] driver: pwm: ti-ecap: Remove duplicate put_sync call.
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 3/3] driver: pwmss: Disable stop clk bit during enable clock call.
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 1/3] pwm: core: Rearrange pwm lock.
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Tero Kristo <t-kristo@xxxxxx>
• RE: Issues with GPIO and wake from sleep
  • From: Marc Murphy <marcmltd@xxxxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• RE: [PATCH 1/4] power_supply: Add inlmt,iterm, min/max temp props
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Florian Vaussard <florian.vaussard@xxxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: next boot: 34 pass, 5 fail (next-20140122)
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omapfb: add coherent dma memory support
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v2 1/5] ARM: dts: omap3: Add support for INCOstartec a83x module
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 4/5] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 5/5] [RFC] omapdss: remove FEAT_DPI_USES_VDDS_DSI from omap3
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 5/5] [RFC] omapdss: remove FEAT_DPI_USES_VDDS_DSI from omap3
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] ARM: dts: omap3: Add support for INCOstartec a83x module
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] ARM: add omap3 INCOstartec board support
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [net-next PATCH v2 1/1] drivers: net: cpsw: enable promiscuous mode support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [net-next PATCH 1/1] drivers: net: cpsw: enable promiscuous mode support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [net-next PATCH 1/1] drivers: net: cpsw: enable promiscuous mode support
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH RFC 08/26] dmaengine: omap-dma: consolidate setup of CCR
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH RFC 08/26] dmaengine: omap-dma: consolidate setup of CCR
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 03/26] dmaengine: omap-dma: program hardware directly
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 08/26] dmaengine: omap-dma: consolidate setup of CCR
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH RFC 03/26] dmaengine: omap-dma: program hardware directly
  • From: Sricharan R <r.sricharan@xxxxxx>
• [PATCH] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi
  • From: Jack Mitchell <ml@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [alsa-devel] [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jean-Francois Moine <moinejf@xxxxxxx>
• Re: [PATCH v4 2/2] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 0/4] power_supply: Introduce power supply charging driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 2/4] power_supply: Introduce Generic Power Supply charging driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 4/4] power_supply: bq24261 charger driver
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 3/4] power_supply: Introduce PSE compliant algorithm
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• [PATCH 1/4] power_supply: Add inlmt,iterm, min/max temp props
  • From: Jenny TC <jenny.tc@xxxxxxxxx>
• Re: [alsa-devel] [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCHv3 00/41] OMAPDSS: DT support v3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v4 2/2] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 2/2] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [net-next PATCH 1/1] drivers: net: cpsw: enable promiscuous mode support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH 4/6] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCHv3 00/41] OMAPDSS: DT support v3
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 5/6] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/6] ARM: dts: Add CPU OPP table for omap37xx100
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 6/6] [RFC] omapdss: remove FEAT_DPI_USES_VDDS_DSI from omap3
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 5/6] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 4/6] ARM: OMAP2+: add legacy display for omap3 DBB056
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 3/6] ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 2/6] ARM: dts: omap3: Add support for INCOstartec a83x module
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 1/6] ARM: dts: Add CPU OPP table for omap37xx100
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• [PATCH 0/6] ARM: add omap3 INCOstartec board support
  • From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Add support for Erratum 2.1.1.128 in device tree boot
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v6 00/10] USB Host support for OMAP5 uEVM (for 3.14)
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv3 39/41] Doc/DT: Add DT binding documentation for Sony acx565akm panel
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCHv3 30/41] ARM: omap3-n900.dts: add display information
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 5/5] mmc: omap_hsmmc: add autocmd23 support
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 3/5] mmc: omap_hsmmc: split dma setup
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 4/5] mmc: omap_hsmmc: add cmd23 support
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 0/5] mmc: omap_hsmmc: add support for set block count
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 1/5] mmc: omap_hsmmc: save clock rate to use in interrupt context
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 2/5] mmc: omap_hsmmc: fix request done for sbc error case
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v4 2/2] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/6] N900 DTS additions for 3.14
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH 0/6] N900 DTS additions for 3.14
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [PATCHv3 40/41] Doc/DT: Add DT binding documentation for TFP410 encoder
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 41/41] Doc/DT: Add DT binding documentation for tpd12s015 encoder
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 39/41] Doc/DT: Add DT binding documentation for Sony acx565akm panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 36/41] Doc/DT: Add DT binding documentation for HDMI Connector
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 38/41] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 35/41] Doc/DT: Add DT binding documentation for DVI Connector
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 37/41] Doc/DT: Add DT binding documentation for MIPI DPI Panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 29/41] ARM: omap3-igep0020.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 33/41] Doc/DT: Add OMAP DSS DT Bindings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 32/41] ARM: OMAP2+: remove pdata quirks for displays
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 34/41] Doc/DT: Add DT binding documentation for Analog TV Connector
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 30/41] ARM: omap3-n900.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 31/41] OMAPDSS: remove DT hacks for regulators
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 26/41] ARM: omap4-sdp.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 28/41] ARM: omap3-beagle-xm.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 27/41] ARM: omap3-beagle.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 25/41] ARM: omap4-panda.dts: add display information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 24/41] ARM: omap4.dtsi: add omapdss information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 22/41] ARM: omap2.dtsi: add omapdss information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 23/41] ARM: omap3.dtsi: add omapdss information
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 21/41] OMAPDSS: acx565akm: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 20/41] OMAPDSS: connector-analog-tv: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 19/41] OMAPDSS: panel-dpi: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 18/41] OMAPDSS: hdmi-connector: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 17/41] OMAPDSS: encoder-tpd12s015: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 14/41] OMAPDSS: panel-dsi-cm: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 16/41] OMAPDSS: connector-dvi: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 15/41] OMAPDSS: encoder-tfp410: Add DT support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 13/41] OMAPDSS: Add DT support to DSI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 12/41] OMAPDSS: Add DT support to VENC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 11/41] OMAPDSS: Add DT support to HDMI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 10/41] OMAPDSS: Add DT support to DISPC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 09/41] OMAPDSS: Add DT support to DSS
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 06/41] OMAPFB: search for default display with DT alias
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 08/41] OMAPDSS: Improve regulator names for DT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 07/41] OMAPDSS: add of helpers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv3 05/41] OMAPFB: clean up default display search
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>