This set of patches adds board support for an omap3 system from INCOstartec.
It's based on next-20140124.
Due to a regression since next-20140115 the following errors are present:
- pin sys_clkout2, which gets configured to 24 Mhz by the fourth patch
in this set, erroneously outputs only 12 Mhz.
Just out of curiosity, configuring it to 48 Mhz puts out desired 24 Mhz.
- omap_dss, which gets configured by the third patch in this set, fails
to do 'dss_set_fck_rate(fck);' in
drivers/video/omap2/dss/dss.c:dss_setup_default_clock() which leads to:
| omapdss_dss: probe of omapdss_dss failed with error -22
| omapdss CORE error: Failed to initialize DSS platform driver
| panel-dpi panel-dpi.0: failed to find video source 'dpi.0
Both regressions seem to have something to do with the clock framework.
Could this be related to the DT clock conversion patches?
Changes compared to previous version (v3):
- rebased on next-20140124
- use pinctrl macros OMAP3_WKUP_IOPAD, OMAP3_CORE1_IOPAD
and OMAP3630_CORE2_IOPAD
- use same convention for all comments
- dss-quirk: name twl4030 VPLL2 regulator as vdds_dsi
- fix style
Changes compared to previous version (v2):
- rebased on next-20140122 from next-20140115
- using omap36xx.dtsi instead of unsupported 1ghz omap37xx100
Initial version (v1):
- based on next-20140115
Christoph Fritz (4):
ARM: dts: omap3: Add support for INCOstartec a83x module
ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
ARM: OMAP2+: add legacy display for omap3 DBB056
ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 459 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap3-lilly-dbb056.dts | 165 +++++++++++
arch/arm/mach-omap2/dss-common.c | 49 ++++
arch/arm/mach-omap2/dss-common.h | 1 +
arch/arm/mach-omap2/pdata-quirks.c | 45 ++-
6 files changed, 719 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/omap3-lilly-a83x.dtsi
create mode 100644 arch/arm/boot/dts/omap3-lilly-dbb056.dts
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
