From: Rajendra Nayak <rnayak@xxxxxx> The SyncTimer in AM43x is clocked using the following two sources: 1) An inaccuarte 32k clock (CLK_32KHZ) derived from PER DPLL, causing system time to go slowly (~10% deviation). 2) external 32KHz RTC clock, which may not always be available on board like in the case of ePOS EVM Use gptimer as clocksource instead, as is done in the case of AM335x (which does not have a SyncTimer). With this, system time keeping works accurately. Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx> --- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/timer.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 8e3daa1..5679464a 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -229,7 +229,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap3_sync32k_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am43_boards_compat, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 74044aa..b62de9f 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -604,7 +604,8 @@ OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP3 */ -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, 1, "timer_sys_ck", "ti,timer-alwon"); #endif -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
