Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- [PATCH v2 04/14] dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 05/14] dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 06/14] dmaengine: edma: Get qDMA channel information from HW also
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 03/14] dmaengine: edma: Simplify function parameter list for channel operations
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 08/14] dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 07/14] dmaengine: edma: Refactor the dma device and channel struct initialization
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 09/14] dmaengine: edma: Merge the of parsing functions
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 10/14] dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 11/14] dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 13/14] ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 12/14] dmaengine: edma: New device tree binding
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 14/14] ARM: DTS: am437x: Use the new DT bindings for the eDMA3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 00/14] dmaenigne: edma/ti-crossbar: fixes, new bindings
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [GIT PULL 2/2] omap device tree changes for v4.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL 2/2] omap device tree changes for v4.4
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL 1/2] omap clean-up for v4.4
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v2 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH v2 2/5] mtd: nand: omap2: Start dma request before enabling prefetch
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH v2 0/5] mtd: nand: Fix support for NAND DMA prefetch
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH v2 3/5] mtd: nand: omap2: Fix high memory dma prefetch transfer
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH v2 4/5] ARM: dts: am437x/am33xx/omap/dm816x: Add gpmc dma channel
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH v2 5/5] ARM: OMAP2+: Update GPMC and NAND DT binding documentation
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- Re: [PATCH 5/5] ARM: OMAP2+: Update gpmc and nand DT binding documentation
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 1/2 v2] ARM: DRA7/335x/437x/OMAP4: hwmod: Remove elm address space from hwmod data
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH 2/2 v2] ARM: DRA7/335x/437x: hwmod: Remove gpmc address space from hwmod data
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- Re: [PATCH v2 1/3] ARM: catch pending imprecise abort on unmask
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/3] ARM: catch pending imprecise abort on unmask
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] ARM: catch pending imprecise abort on unmask
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/3] ARM: catch pending imprecise abort on unmask
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [GIT PULL] omap fixes against v4.3-rc5
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAPDSS: DISPC: Remove boolean comparisons
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH] OMAPDSS: DISPC: Remove boolean comparisons
- From: Luis de Bethencourt <luisbg@xxxxxxxxxxxxxxx>
- [PATCH v2 3/3] ARM: BCM5301X: remove workaround imprecise abort fault handler
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 1/3] ARM: catch pending imprecise abort on unmask
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 2/3] ARM: OMAP2+: remove custom abort handler for t410
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2 0/3] ARM: handle imprecise aborts from firmware in common code
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH] twl4030_charger: add missing iio dependency
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH] twl4030_charger: add missing iio dependency
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH] twl4030_charger: add missing iio dependency
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 3/4] ARM: mvebu: remove the workaround imprecise abort fault handler
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: catch pending imprecise abort on unmask
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 00/24] dmaengine/ARM: Merge the edma drivers into one
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] ARM: DRA7: hwmod: Remove elm address space from hwmod data
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH v2 2/3] ARM: dts: AM43x-epos-evm: Add AM438x compatible string for epos
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 3/3] ARM: OMAP2: AM43XX: Modify optimize string comparisons in soc_is calls
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 1/3] ARM: OMAP2: DRA7: Modify optimize string comparisons in soc_is calls
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH v2 0/3] ARM: OMAP2+: Optimize soc_is calls
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH] arm, omap2, sram: On HS/EMU devices, only 64K internal SRAM is available.
- From: Heiko Schocher <hs@xxxxxxx>
- Re: [PATCH] arm, omap2, sram: On HS/EMU devices, only 64K internal SRAM is available.
- From: Heiko Schocher <hs@xxxxxxx>
- Re: [PATCH 02/13] dmaengine: edma: Optimize memcpy operation
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] arm, omap2, sram: On HS/EMU devices, only 64K internal SRAM is available.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] arm, omap2, sram: On HS/EMU devices, only 64K internal SRAM is available.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: catch pending imprecise abort on unmask
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- Re: [PATCH 4/4] ARM: BCM5301X: remove workaround imprecise abort fault handler
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- [GIT PULL 2/2] omap device tree changes for v4.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 1/2] omap clean-up for v4.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] ARM: mvebu: remove the workaround imprecise abort fault handler
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- [GIT PULL] omap fixes against v4.3-rc5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] ARM: OMAP3: clock: remove un-used core dpll re-program code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-igep: Use OMAP3_CORE1_IOPAD pinmux macro
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] Add USB hooks into NanoBone DTS file
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH] arm, omap2, sram: On HS/EMU devices, only 64K internal SRAM is available.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Felipe Balbi <balbi@xxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Bin Liu <b-liu@xxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/4] ARM: OMAP2+: remove custom abort handler for t410
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Bin Liu <b-liu@xxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [PATCH v3 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Felipe Balbi <balbi@xxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Bin Liu <b-liu@xxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Bin Liu <b-liu@xxxxxx>
- Re: [PATCH 02/13] dmaengine: edma: Optimize memcpy operation
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 10/13] dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 0/4] ARM: handle imprecise aborts from firmware in common code
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: mvebu: remove the workaround imprecise abort fault handler
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/4] ARM: OMAP2+: remove custom abort handler for t410
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 1/4] ARM: catch pending imprecise abort on unmask
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: BCM5301X: remove workaround imprecise abort fault handler
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 10/13] dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 02/13] dmaengine: edma: Optimize memcpy operation
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes.
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [PATCH v5 00/24] dmaengine/ARM: Merge the edma drivers into one
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes.
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 4/5] ARM: dts: am437x/am33xx/omap3/dm816x: Add gpmc dma channel
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- [PATCH v2] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH] Add USB hooks into NanoBone DTS file
- From: Mark Jackson <mpfj@xxxxxxxxxxxxx>
- Re: [PATCH 2/5] mtd: nand: omap2: Start dma request before enabling prefetch
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes.
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- [PATCH 00/13] dmaenigne: edma/ti-crossbar: fixes, new bindings
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 01/13] dmaengine: edma: Remove alignment constraint for memcpy
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 03/13] dmaengine: edma: Simplify function parameter list for channel operations
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 02/13] dmaengine: edma: Optimize memcpy operation
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 06/13] dmaengine: edma: Get qDMA channel information from HW also
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 04/13] dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 05/13] dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 08/13] dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 07/13] dmaengine: edma: Refactor the dma device and channel struct initialization
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 09/13] dmaengine: edma: Merge the of parsing functions
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 10/13] dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 12/13] ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 13/13] ARM: DTS: am437x: Use the new DT bindings for the eDMA3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 11/13] dmaengine: edma: New device tree binding
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] ARM: DRA7: hwmod: Remove elm address space from hwmod data
- From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
- Re: [REPOST PATCH 0/2] DRA7 DSP MMU config support
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3: keep ssi ports by default
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v5 00/24] dmaengine/ARM: Merge the edma drivers into one
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 01/24] ARM: common: edma: Fix channel parameter for irq callbacks
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 02/24] ARM: common: edma: Remove unused functions
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 03/24] dmaengine: edma: Simplify and optimize the edma_execute path
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 05/24] ARM/dmaengine: edma: Move of_dma_controller_register to the dmaengine driver
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 04/24] ARM: davinci/common: Convert edma driver to handle one eDMA instance per driver
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 5/5] ARM: OMAP2+: Update gpmc and nand DT binding documentation
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v5 08/24] ARM/dmaengine: edma: Remove limitation on the number of eDMA controllers
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 10/24] ARM: davinci: Add dma_mask to eDMA devices
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 12/24] dmaengine: edma: Allocate memory dynamically for bitmaps and structures
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 07/24] ARM/dmaengine: edma: Public API to use private struct pointer
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 14/24] dmaengine: edma: Cleanup regarding the use of dev around the code
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 13/24] dmaengine: edma: Use devm_kcalloc when possible
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 06/24] ARM: common: edma: Internal API to use pointer to 'struct edma'
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCHv2] ARM: OMAP3: clock: remove un-used core dpll re-program code
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH] ARM: OMAP3: clock: remove un-used core dpll re-program code
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH v5 15/24] dmaengine: edma: Use dev_dbg instead pr_debug
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 16/24] dmaengine: edma: Use the edma_write_slot instead open coded memcpy_toio
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 18/24] dmaengine: edma: Consolidate the comments for functions
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 17/24] dmaengine: edma: Print warning when linking slots from different eDMA
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 11/24] ARM/dmaengine: edma: Merge the two drivers under drivers/dma/
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 19/24] dmaengine: edma: Simplify the interrupt handling
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 22/24] dmaengine: edma: Read channel mapping support only once from HW
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 20/24] dmaengine: edma: Move the pending error check into helper function
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 24/24] dmaengine: edma: Dynamic paRAM slot handling if HW supports it
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 23/24] dmaengine: edma: Rename bitfields for slot and channel usage tracking
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 4/5] ARM: dts: am437x/am33xx/omap3/dm816x: Add gpmc dma channel
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v5 21/24] dmaengine: edma: Simplify and optimize ccerr interrupt handler
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v5 09/24] ARM: davinci: Use platform_device_register_full() to create pdev for eDMA
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 2/5] mtd: nand: omap2: Start dma request before enabling prefetch
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/2] hsi: omap_ssi_port: Prevent warning if cawake_gpio is not defined.
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3: keep ssi ports by default
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3: keep ssi ports by default
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3: keep ssi ports by default
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3: keep ssi ports by default
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v4 20/25] dmaengine: edma: Simplify the interrupt handling
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v4 20/25] dmaengine: edma: Simplify the interrupt handling
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3: keep ssi ports by default
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH v4 00/25] dmaengine/ARM: Merge the edma drivers into one
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 0/2] omap: hsi: Fix warnings on boards that don't use ssi ports
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 2/2] ARM: dts: omap3: keep ssi ports by default
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 1/2] hsi: omap_ssi_port: Prevent warning if cawake_gpio is not defined.
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v4 00/25] dmaengine/ARM: Merge the edma drivers into one
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v4 20/25] dmaengine: edma: Simplify the interrupt handling
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH] ARM: OMAP2+: Update Javier Martinez Canillas's email
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- [PATCH v2 0/2] ARM: OMAP2+ McASP(3) support for DRA7xx family
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 2/2] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 1/2] ARM: OMAP2+: hwmod: Add hwmod flag for HWMOD_OPT_CLKS_NEEDED
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v4 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v3 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] ARM: DRA7: hwmod: Remove elm address space from hwmod data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v3] ARM: OMAP: Change all cpu_is_* occurences to soc_is_*
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v3 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: Linux 4.2.0-rc5: am335x: musb warnings
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: AM37x unable to drive output of some gpio lines (works with 2.6.37)
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: AM37x unable to drive output of some gpio lines (works with 2.6.37)
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] ARM: dts: omap3-igep: Use OMAP3_CORE1_IOPAD pinmux macro
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- [PATCH] ARM: dts: omap3-igep: Use OMAP3_CORE1_IOPAD pinmux macro
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: dts: Add basic support for isee igepv5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/3] ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/3] ARM: dts: Fix WLAN regression on omap5-uevm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 12/17] ARM: OMAP2+: remove misuse of IRQF_NO_SUSPEND flag
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH 12/17] ARM: OMAP2+: remove misuse of IRQF_NO_SUSPEND flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- [PATCH v2 3/3] arm:omap2: IRQCHIP_DECLARE macro is now accessible
- From: Joel Porquet <joel@xxxxxxxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH] ARM: DRA7: hwmod: Remove elm address space from hwmod data
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: fix initialization order of mmc block devices
- From: Tom Rini <trini@xxxxxxxxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: fix initialization order of mmc block devices
- From: Dirk Behme <dirk.behme@xxxxxxxxx>
- Re: [PATCH v2 0/3] arm:irchip: IRQCHIP_DECLARE macro is now accessible
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- [PATCH] ARM: DRA7: hwmod: Remove elm address space from hwmod data
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- Re: [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Rolf Peukert <rolf.peukert@xxxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: fix initialization order of mmc block devices
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH v2 0/3] arm:irchip: IRQCHIP_DECLARE macro is now accessible
- From: Joel Porquet <joel@xxxxxxxxxxx>
- [PATCH v2 2/3] arm:imx: IRQCHIP_DECLARE macro is now accessible
- From: Joel Porquet <joel@xxxxxxxxxxx>
- [PATCH v2 1/3] arm:exynos: IRQCHIP_DECLARE macro is now accessible
- From: Joel Porquet <joel@xxxxxxxxxxx>
- RE: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH 12/17] ARM: OMAP2+: remove misuse of IRQF_NO_SUSPEND flag
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v4 11/25] ARM/dmaengine: edma: Merge the two drivers under drivers/dma/
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] spi: spi-ti-qspi: switch to polling mode for better r/w performance
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH v4 11/25] ARM/dmaengine: edma: Merge the two drivers under drivers/dma/
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] mfd: omap-usb-host: AM3715 OHCI needs 120m functional clock
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH] mfd: omap-usb-host: AM3715 OHCI needs 120m functional clock
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] mfd: omap-usb-host: AM3715 OHCI needs 120m functional clock
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: fix initialization order of mmc block devices
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCH 2/2] arm: omap2+: PM: change trace_power_domain_target event format.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- Re: DM3730 vs 3630 DSS Cock dividers
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: fix initialization order of mmc block devices
- From: Heiko Schocher <hs@xxxxxxx>
- [BISECTED] v4.3-rc5: OMAP1 boot hang
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] mmc: omap_hsmmc: fix initialization order of mmc block devices
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCH v3] ARM: dts: twl4030: Add iio properties for bci subnode
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] arm, omap2, sram: On HS/EMU devices, only 64K internal SRAM is available.
- From: Heiko Schocher <hs@xxxxxxx>
- [PATCH] mmc: omap_hsmmc: fix initialization order of mmc block devices
- From: Heiko Schocher <hs@xxxxxxx>
- Re: [PATCH v2] ARM: OMAP: Change all cpu_is_* occurences to soc_is_*
- From: Keerthy <a0393675@xxxxxx>
- [PATCH 2/5] mtd: nand: omap2: Start dma request before enabling prefetch
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH 1/5] mtd: nand: omap2: Support parsing dma channel information from DT
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH 4/5] ARM: dts: am437x/am33xx/omap3/dm816x: Add gpmc dma channel
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH 3/5] mtd: nand: omap2: Fix high memory dma prefetch transfer
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH 5/5] ARM: OMAP2+: Update gpmc and nand DT binding documentation
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- [PATCH 0/5] mtd: nand: Fix support for NAND DMA Prefetch
- From: Franklin S Cooper Jr <fcooper@xxxxxx>
- Re: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] ARM: dts: twl4030: Add iio properties for bci subnode
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 0/3] Fix mmc/sd card detect gpio dt definition
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3-igep0020: Remove duplicate uart2 pinmux
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm: omap2+: PM: change trace_power_domain_target event format.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: multi_v7_defconfig: Enable more OMAP family platforms
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: PM: Denote the cpuidle tracepoints as _rcuidle()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [REPOST PATCH 1/4] ARM: dts: DRA7: Add dsp1_system syscon node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [REPOST PATCH 1/4] ARM: dts: DRA7: Add dsp1_system syscon node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: omap3-igep: Fix indentation
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [REPOST PATCH 1/4] ARM: dts: DRA7: Add dsp1_system syscon node
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: omap3-igep0020: Remove duplicate uart2 pinmux
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: omap3-igep: Fix indentation
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3] ARM: dts: twl4030: Add iio properties for bci subnode
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [REPOST PATCH 1/4] ARM: dts: DRA7: Add dsp1_system syscon node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] ARM: dts: twl4030: Add iio properties for bci subnode
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: Add am335x-bonegreen
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/5] Add DRA7 sub-mailboxes for 4.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 28/37] ARM: dts: omap4-duovero: Fix regulator enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 02/37] ARM: dts: am43xx-epos-evm: Remove unneeded regulator property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 30/37] ARM: dts: omap3-beagle-xm: Fix regulator enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 00/37] ARM: dts: Fix fixed regulators enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 31/37] ARM: dts: omap3-beagle: Fix regulator enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 33/37] ARM: dts: omap3-tao3530: Fix regulator enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 32/37] ARM: dts: omap3-overo-base: Fix regulator enable GPIO polarity
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 09/37] ARM: dts: omap3-tao3530: Remove invalid enable-active-low regulator property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 08/37] ARM: dts: omap3-sb-t35: Remove invalid enable-active-low regulator property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 07/37] ARM: dts: omap3-evm: Remove invalid enable-active-low regulator property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 01/37] ARM: dts: am437x-gp-evm: Remove unneeded regulator property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: am335x-wega: Clean up regulators
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: dra7-evm: enable leds and gpio-keys support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/3] video: omapdss: delete unneeded of_node_put
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH 0/3] delete unneeded of_node_put
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: Add DCAN sleep pins
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] ARM: dts: omap3-igep0020: Remove duplicate uart2 pinmux
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 1/2] ARM: dts: omap3-igep: Fix indentation
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 12/17] ARM: OMAP2+: remove misuse of IRQF_NO_SUSPEND flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH 12/17] ARM: OMAP2+: remove misuse of IRQF_NO_SUSPEND flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 5/5] arm: boot: store ATAGs structure into DT "/chosen/linux,atags" entry
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 0/7] ARM: OMAP2+: support for DT based pwrdm/clkdm data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: multi_v7_defconfig: Enable more OMAP family platforms
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: DM3730 vs 3630 DSS Cock dividers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mfd: omap-usb-host: AM3715 OHCI needs 120m functional clock
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mfd: omap-usb-host: AM3715 OHCI needs 120m functional clock
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: DM3730 vs 3630 DSS Cock dividers
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: Remove unneeded semicolons
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: vc: Remove unused macros
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mfd: omap-usb-host: AM3715 OHCI needs 120m functional clock
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] Remove board support for VoiceBlue board.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] mfd: omap-usb-host: AM3715 OHCI needs 120m functional clock
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] ARM: OMAP: Change all cpu_is_* occurences to soc_is_*
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] ARM: OMAP: Change all cpu_is_* occurences to soc_is_*
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: clock: remove un-used core dpll re-program code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fixed inverted OMAP_OFFOUT_EN
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: Add Audio support for LogicPD Torpedo DM3730 devkit
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: DM3730 vs 3630 DSS Cock dividers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 11/25] ARM/dmaengine: edma: Merge the two drivers under drivers/dma/
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH] ARM: AM35xx: Add M-USB clk device ID
- From: Rolf Peukert <rolf.peukert@xxxxxxx>
- RE: musb: communication issue with more than 12 FTDI ports
- From: Konstantin Shkolnyy <Konstantin.Shkolnyy@xxxxxxxxxx>
- Re: AM37x unable to drive output of some gpio lines (works with 2.6.37)
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH] sched_clock: add data pointer argument to read callback
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: musb: communication issue with more than 12 FTDI ports
- From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
- musb: communication issue with more than 12 FTDI ports
- From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: DTS: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- [PATCH 2/3] ARM: DTS: am43xx: fix cd-gpios definition as per hardware design and dt binding docs
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- [PATCH 1/3] ARM: DTS: am335x: fix cd-gpios definition as per hardware design and dt binding docs
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- [PATCH 0/3] Fix mmc/sd card detect gpio dt definition
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: [net-next PATCH] driver: net: cpsw: add no_bd_ram dt parsing
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- [PATCH] spi: ti-qspi: Fix data corruption seen on r/w stress test
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- OMAP baseline test results for v4.3-rc5
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] sched_clock: add data pointer argument to read callback
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] sched_clock: add data pointer argument to read callback
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH] sched_clock: add data pointer argument to read callback
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: [PATCH] sched_clock: add data pointer argument to read callback
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 0/2] DRA72/DRA74: Add 2 lane support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH] sched_clock: add data pointer argument to read callback
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: [PATCH] sched_clock: add data pointer argument to read callback
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 0/2] DRA72/DRA74: Add 2 lane support
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [RFC PATCH 0/2] DRA72/DRA74: Add 2 lane support
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [RFC PATCH 0/2] DRA72/DRA74: Add 2 lane support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [RFC] AM35xx glue code for M-USB driver
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fixed inverted OMAP_OFFOUT_EN
- From: Ben Tucker <benjamint@xxxxxxxxxxx>
- Re: [RFC] AM35xx glue code for M-USB driver
- From: Rolf Peukert <rolf.peukert@xxxxxxx>
- [net-next PATCH] driver: net: cpsw: add no_bd_ram dt parsing
- From: Mugunthan V N <mugunthanvnm@xxxxxx>
- Re: AM37x unable to drive output of some gpio lines (works with 2.6.37)
- From: Rolf Peukert <rolf.peukert@xxxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fixed inverted OMAP_OFFOUT_EN
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- AM37x unable to drive output of some gpio lines (works with 2.6.37)
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP2+: Fixed inverted OMAP_OFFOUT_EN
- From: Ben Tucker <benjamint@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] genirq: export handle_bad_irq
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC] AM35xx glue code for M-USB driver
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC] AM35xx glue code for M-USB driver
- From: Rolf Peukert <rolf.peukert@xxxxxxx>
- Re: [RFC] AM35xx glue code for M-USB driver
- From: Rolf Peukert <rolf.peukert@xxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] mmc: host: omap_hsmmc: Fix MMC for omap3 legacy booting
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/2] Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status"
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [RFC] AM35xx glue code for M-USB driver
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Roger Quadros <rogerq@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] mmc: host: omap_hsmmc: Fix MMC for omap3 legacy booting
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status"
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC] AM35xx glue code for M-USB driver
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v4 00/25] dmaengine/ARM: Merge the edma drivers into one
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [RFC] AM35xx glue code for M-USB driver
- From: Rolf Peukert <rolf.peukert@xxxxxxx>
- Re: [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/2] memory: omap-gpmc: dump "before" state before first modification
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- [PATCH] genirq: fix handle_bad_irq kerneldoc comment
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] genirq: export handle_bad_irq
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH] genirq: export handle_bad_irq
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 2/2] memory: omap-gpmc: expand the description of the debug facility
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 1/2] memory: omap-gpmc: dump "before" state before first modification
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 04/11] arm: omap2: timer: provide generic sync32k_timer_init function
- From: Felipe Balbi <balbi@xxxxxx>
- Re: cpufreq-dt error: failed to init cpufreq table: -61
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH 04/11] arm: omap2: timer: provide generic sync32k_timer_init function
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 03/11] arm: omap2: timer: remove __omap_gptimer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 10/11] arm: omap2+: select 32k clocksource driver
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 00/11] arm: omap: counter32k rework
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 01/11] arm: omap2: timer: get rid of obfuscating macros
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 11/11] arm: omap2: timer: limit hwmod usage to non-DT boots
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 08/11] arm: omap2: timer: rename omap_sync32k_timer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 07/11] arm: omap2: timer: remove omap4_local_timer_init
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 05/11] arm: omap2: timer: move realtime_counter_init() around
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 04/11] arm: omap2: timer: provide generic sync32k_timer_init function
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 06/11] arm: omap2: timer: always call clocksource_of_init() when DT
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 02/11] arm: omap2: timer: add a gptimer argument to sync32k_timer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Suman Anna <s-anna@xxxxxx>
- Re: cpufreq-dt error: failed to init cpufreq table: -61
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 3/4] ARM: dts: DRA7: Add timer12 node
- From: Suman Anna <s-anna@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: cpufreq-dt error: failed to init cpufreq table: -61
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 10/13] twl4030_charger: add software controlled linear charging mode.
- From: Pavel Machek <pavel@xxxxxx>
- Re: cpufreq-dt error: failed to init cpufreq table: -61
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: cpufreq-dt error: failed to init cpufreq table: -61
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: cpufreq-dt error: failed to init cpufreq table: -61
- From: Felipe Balbi <balbi@xxxxxx>
- cpufreq-dt error: failed to init cpufreq table: -61
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [RFC 0/7] ARM: OMAP2+: support for DT based pwrdm/clkdm data
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH] memory: omap-gpmc: Fix unselectable debug option for GPMC
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH] memory: omap-gpmc: Fix unselectable debug option for GPMC
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 0/7] ARM: OMAP2+: support for DT based pwrdm/clkdm data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 01/17] ARM: OMAP2+: PRM: add support for reset controller
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH RFC] ASoC: simple-card: Update clocks binding for simple-card DAI subnodes
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 00/25] dmaengine/ARM: Merge the edma drivers into one
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v4 11/27] mtd: nand: omap: Clean up device tree support
- From: Roger Quadros <rogerq@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Roger Quadros <rogerq@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Roger Quadros <rogerq@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- [PATCH] ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] mmc: omap: Fix module autoload for OF platform driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] arm: omap2: timer: don't disable our timers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 3/4] ARM: dts: DRA7: Add timer12 node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 00/25] dmaengine/ARM: Merge the edma drivers into one
- From: "Koul, Vinod" <vinod.koul@xxxxxxxxx>
- Re: [PATCH v4 00/25] dmaengine/ARM: Merge the edma drivers into one
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] pwm: tipwmss: enable on TI DRA7x and AM437x
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 3/4] ARM: dts: DRA7: Add timer12 node
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH v2] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH v2 2/4] ARM: OMAP2+: timer: Remove secure timer for DRA7xx HS devices
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH v2 0/4] DRA7 Timer12 Support
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH v2 1/4] ARM: OMAP: dmtimer: check for fixed timers during config
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH v2 4/4] ARM: DRA7: hwmod: Add data for GPTimer 12
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH v2 3/4] ARM: dts: DRA7: Add timer12 node
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] arm: omap2: timer: don't disable our timers
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v9 0/4] Allow USB devices to remain runtime-suspended when sleeping
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v9 0/4] Allow USB devices to remain runtime-suspended when sleeping
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- [PATCH] arm: omap2: timer: don't disable our timers
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Felipe Balbi <balbi@xxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP: dmtimer: check for fixed timers during config
- From: Suman Anna <s-anna@xxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] clk: ti: fix dual-registration of uart4_ick
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP: dmtimer: check for fixed timers during config
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP: dmtimer: check for fixed timers during config
- From: Suman Anna <s-anna@xxxxxx>
- Re: [RFC/PATCH 03/11] arm: omap2: timer: remove __omap_gptimer_init()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 03/11] arm: omap2: timer: remove __omap_gptimer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC/PATCH 03/11] arm: omap2: timer: remove __omap_gptimer_init()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Enable packed accesses for cyclic transfers
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [RFC/PATCH 03/11] arm: omap2: timer: remove __omap_gptimer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] pwm: tipwmss: enable on TI DRA7x and AM437x
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v9 0/4] Allow USB devices to remain runtime-suspended when sleeping
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- [PATCH v9 2/4] PM / Domains: add setter for dev.pm_domain
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/3] iio:adc:palmas: add DT support
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: OMAP2+: N900: always enable IBE bit
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] clk: ti: fix dual-registration of uart4_ick
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 2/3] iio:adc:palmas: add DT support
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC/PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/3] iio:adc:palmas: add DT support
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [RFC/PATCH 03/11] arm: omap2: timer: remove __omap_gptimer_init()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] clk: ti: fix dual-registration of uart4_ick
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] iio:adc: fix platform_no_drv_owner.cocci warnings
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH v2 0/3] Add Palmas iio gpadc
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v2 2/3] iio:adc:palmas: add DT support
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v2 3/3] ARM: dts: omap5-uevm: enable iio gpadc for Palmas
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- OMAP baseline test results for v4.3-rc4
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 5/8] dwc3-pci: use PCI_VDEVICE() instead of PCI_DEVICE()
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH] serial: omap: remove warnings about unused functions
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP: dmtimer: check for fixed timers during config
- From: kbuild test robot <lkp@xxxxxxxxx>
- [REPOST PATCH 1/4] ARM: dts: DRA7: Add dsp1_system syscon node
- From: Suman Anna <s-anna@xxxxxx>
- [REPOST PATCH 4/4] ARM: dts: DRA74x: Add IOMMU nodes for DSP2
- From: Suman Anna <s-anna@xxxxxx>
- [REPOST PATCH 0/4] Add DRA7 IOMMU DT nodes
- From: Suman Anna <s-anna@xxxxxx>
- [REPOST PATCH 3/4] ARM: dts: DRA7: Add common IOMMU nodes
- From: Suman Anna <s-anna@xxxxxx>
- [REPOST PATCH 2/4] ARM: dts: DRA74x: Add dsp2_system syscon node
- From: Suman Anna <s-anna@xxxxxx>
- [REPOST PATCH 2/2] iommu/omap: Add support for configuring dsp iommus on DRA7xx
- From: Suman Anna <s-anna@xxxxxx>
- [REPOST PATCH 0/2] DRA7 DSP MMU config support
- From: Suman Anna <s-anna@xxxxxx>
- [REPOST PATCH 1/2] Documentation: dt: Update OMAP iommu bindings for DRA7 DSPs
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 2/2] gpio: omap: convert to use generic irq handler
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] clk: ti: dflt: fix enable_reg validity check
- From: Suman Anna <s-anna@xxxxxx>
- Re: [GIT PULL] clock: ti: fixes for 4.3-rc
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH] clk: ti: dflt: fix enable_reg validity check
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH v2] clk: ti: fix dual-registration of uart4_ick
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: Queueing b0a688ddcc50 "usb: musb: cppi41: allow it to work again" for -stable
- From: Felipe Balbi <balbi@xxxxxx>
- Re: Queueing b0a688ddcc50 "usb: musb: cppi41: allow it to work again" for -stable
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
- Re: Queueing b0a688ddcc50 "usb: musb: cppi41: allow it to work again" for -stable
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 1/2] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] ARM: Remove __ref on hotplug cpu die path
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH v8 0/4] Allow USB devices to remain runtime-suspended when sleeping
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- [PATCH v8 2/4] PM / Domains: add setter for dev.pm_domain
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- [GIT PULL] clock: ti: fixes for 4.3-rc
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH] clk: ti: dflt: fix enable_reg validity check
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v2] clk: ti: fix dual-registration of uart4_ick
- From: Tero Kristo <t-kristo@xxxxxx>
- Queueing b0a688ddcc50 "usb: musb: cppi41: allow it to work again" for -stable
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] clk: ti: fix dual-registration of uart4_ick
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [RFC/PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC/PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [RFC/PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [RFC/PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: John Stultz <john.stultz@xxxxxxxxxx>
- [PATCH 4/4] ARM: DRA7: hwmod: Add data for GPTimer 12
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 3/4] ARM: dts: DRA7: Add timer12 node
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 0/4] DRA7 Timer12 Support
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 1/4] ARM: OMAP: dmtimer: check for fixed timers during config
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 2/4] ARM: OMAP2+: timer: Remove secure timer for DRA7xx devices
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH] clk: ti: drop locking code from mux/divider drivers
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 10/13] twl4030_charger: add software controlled linear charging mode.
- From: Neil Brown <neil@xxxxxxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH RFC RFT 2/3] clk: clk_put WARNs if user has not disabled clk
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCHv4] arm: omap2: timer: always define omap4_local_timer_init
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCH 2/2] thermal: ti-soc-thermal: add OMAP36xx support
- From: Punit Agrawal <punit.agrawal@xxxxxxx>
- Re: [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCHv4] arm: omap2: timer: always define omap4_local_timer_init
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH] clk: ti: dflt: fix enable_reg validity check
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 0/2] thermal: omap3 support
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [PATCH 1/2] ti-soc-thermal: implement omap3 support
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [PATCH 2/2] thermal: ti-soc-thermal: add OMAP36xx support
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- Re: [PATCHv3 1/1] ti-soc-thermal: implement omap3 support
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [RFC/PATCH 01/11] arm: omap2: timer: get rid of obfuscating macros
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 10/11] arm: omap2: timer: limit hwmod usage to non-DT boots
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 08/11] arm: omap2: timer: rename omap_sync32k_timer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 04/11] arm: omap2: timer: provide generic sync32k_timer_init function
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 09/11] clocksource: add TI 32.768 Hz counter driver
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 06/11] arm: omap2: timer: always call clocksource_of_init() when DT
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 07/11] arm: omap2: timer: remove omap4_local_timer_init
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 11/11] arm: boot: dts: omap: add missing default status for 32k counter
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 03/11] arm: omap2: timer: remove __omap_gptimer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 02/11] arm: omap2: timer: add a gptimer argument to sync32k_timer_init()
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 05/11] arm: omap2: timer: move realtime_counter_init() around
- From: Felipe Balbi <balbi@xxxxxx>
- [RFC/PATCH 00/11] arm: omap: counter32k rework
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- RE: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: [PATCHv4] arm: omap2: timer: always define omap4_local_timer_init
- From: Nishanth Menon <nm@xxxxxx>
- [PATCHv4] arm: omap2: timer: always define omap4_local_timer_init
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCHv3] arm: omap2: timer: always define omap4_local_timer_init
- From: Nishanth Menon <nm@xxxxxx>
- [PATCHv3] arm: omap2: timer: always define omap4_local_timer_init
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH v2] clk: ti: fix dual-registration of uart4_ick
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH] clk: ti: fix dual-registration of uart4_ick
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks
- From: Lokesh Vutla <a0131933@xxxxxx>
- Re: [PATCHv2] arm: omap2: timer: always define omap4_local_timer_init
- From: Nishanth Menon <nm@xxxxxx>
- [PATCHv2] arm: omap2: timer: always define omap4_local_timer_init
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] arm: omap2: timer: always define omap4_local_timer_init
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] arm: omap2: timer: always define omap4_local_timer_init
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH RFC] ASoC: simple-card: Update clocks binding for simple-card DAI subnodes
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH] arm: omap2: timer: always define omap4_local_timer_init
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v3 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v3 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH v3 2/2] arm: omap2+: PM: change trace_power_domain_target event format.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- [PATCH v3 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- [RFC PATCH 0/2] DRA72/DRA74: Add 2 lane support
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [RFC PATCH 1/2] pci: host: pci-dra7xx: use "num-lanes" property to find phy count
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [RFC PATCH 2/2] pci: host: pci-dra7xx: Enable x2 mode support
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH RFC v4 3/8] ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCH RFC v4 3/8] ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
- From: Daniel Vetter <daniel@xxxxxxxx>
- Re: [PATCH RFC v4 3/8] ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re:[PATCH RFC v4 3/8] ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v2 2/2] arm: omap2+: PM: change trace_power_domain_target event format.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- [PATCH v2 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- Re: [PATCH 07/17] ARM: dts: am4372: add reset data
- From: Tero Kristo <t-kristo@xxxxxx>
- OMAP baseline test results for v4.3-rc3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 2/3] iio:adc:palmas: add DT support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 01/11 RESEND] ARM: OMAP: DRA7: hwmod: Add data for McASP3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [GIT PULL] omap fixes for most mmc regressions and few other fixes
- From: Olof Johansson <olof@xxxxxxxxx>
- OMAP baseline test results for v4.3-rc2
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v3] ARM: dts: twl4030: Add iio properties for bci subnode
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: All OMAP platforms: MMC is broken
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH 0/2] convert to use generic irq handler
- From: "santosh.shilimkar@xxxxxxxxxx" <santosh.shilimkar@xxxxxxxxxx>
- [PATCH 0/2] convert to use generic irq handler
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 2/2] gpio: omap: convert to use generic irq handler
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 1/2] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH] gpio: omap: fix static checker warning
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] ARM: dts: Add am335x-bonegreen
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH] ARM: dts: Add am335x-bonegreen
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH] ARM: dts: Add am335x-bonegreen
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH] ARM: dts: Add am335x-bonegreen
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH 2/2] arm: omap2+: PM: change trace_power_domain_target event format.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: Nishanth Menon <nm@xxxxxx>
- [GIT PULL] omap fixes for most mmc regressions and few other fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2: erratum I688 handling disabled for AM335x
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 2/2] arm: omap2+: PM: change trace_power_domain_target event format.
- From: Steven Rostedt <rostedt@xxxxxxxxxxx>
- Re: [PATCH 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: Steven Rostedt <rostedt@xxxxxxxxxxx>
- [PATCH 1/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- [PATCH 0/2] Trace: PM: promote event 'power_domain_target' to generic power domains.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- [PATCH 2/2] arm: omap2+: PM: change trace_power_domain_target event format.
- From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
- [PATCH] ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]