On Wed, Dec 09, 2015 at 02:02:00PM -0600, Rob Herring wrote:
> On Wed, Dec 09, 2015 at 10:18:10AM +0200, Peter Ujfalusi wrote:
> > This change makes the DT file to be easier to read since the memcpy
> > channels array does not need the '/bits/ 16' to be specified, which might
> > confuse some people.
>
> Why? I don't see the point of this change and plus you are breaking
> compatibility with the change. There was little reason to do 16-bit
> values to start with, but that's now the ABI.
Okay, I now see the explanation in cover letter. That should be part of
this commit message.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
>
> Rob
>
> > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> > ---
> > Documentation/devicetree/bindings/dma/ti-edma.txt | 5 ++---
> > drivers/dma/edma.c | 22 ++++++++++------------
> > include/linux/platform_data/edma.h | 2 +-
> > 3 files changed, 13 insertions(+), 16 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> > index d3d0a4fb1c73..ae8b8f1d6e69 100644
> > --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> > +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> > @@ -22,8 +22,7 @@ Required properties:
> > Optional properties:
> > - ti,hwmods: Name of the hwmods associated to the eDMA CC
> > - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
> > - these channels will be SW triggered channels. The list must
> > - contain 16 bits numbers, see example.
> > + these channels will be SW triggered channels. See example.
> > - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
> > the driver, they are allocated to be used by for example the
> > DSP. See example.
> > @@ -56,7 +55,7 @@ edma: edma@49000000 {
> > ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
> >
> > /* Channel 20 and 21 is allocated for memcpy */
> > - ti,edma-memcpy-channels = /bits/ 16 <20 21>;
> > + ti,edma-memcpy-channels = <20 21>;
> > /* The following PaRAM slots are reserved: 35-45 and 100-110 */
> > ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
> > /bits/ 16 <100 10>;
> > diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
> > index 2af8f32bba0b..89fc17f3a6ff 100644
> > --- a/drivers/dma/edma.c
> > +++ b/drivers/dma/edma.c
> > @@ -1752,16 +1752,14 @@ static enum dma_status edma_tx_status(struct dma_chan *chan,
> > return ret;
> > }
> >
> > -static bool edma_is_memcpy_channel(int ch_num, u16 *memcpy_channels)
> > +static bool edma_is_memcpy_channel(int ch_num, s32 *memcpy_channels)
> > {
> > - s16 *memcpy_ch = memcpy_channels;
> > -
> > if (!memcpy_channels)
> > return false;
> > - while (*memcpy_ch != -1) {
> > - if (*memcpy_ch == ch_num)
> > + while (*memcpy_channels != -1) {
> > + if (*memcpy_channels == ch_num)
> > return true;
> > - memcpy_ch++;
> > + memcpy_channels++;
> > }
> > return false;
> > }
> > @@ -1775,7 +1773,7 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
> > {
> > struct dma_device *s_ddev = &ecc->dma_slave;
> > struct dma_device *m_ddev = NULL;
> > - s16 *memcpy_channels = ecc->info->memcpy_channels;
> > + s32 *memcpy_channels = ecc->info->memcpy_channels;
> > int i, j;
> >
> > dma_cap_zero(s_ddev->cap_mask);
> > @@ -1996,16 +1994,16 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
> > prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
> > if (prop) {
> > const char pname[] = "ti,edma-memcpy-channels";
> > - size_t nelm = sz / sizeof(s16);
> > - s16 *memcpy_ch;
> > + size_t nelm = sz / sizeof(s32);
> > + s32 *memcpy_ch;
> >
> > - memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s16),
> > + memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s32),
> > GFP_KERNEL);
> > if (!memcpy_ch)
> > return ERR_PTR(-ENOMEM);
> >
> > - ret = of_property_read_u16_array(dev->of_node, pname,
> > - (u16 *)memcpy_ch, nelm);
> > + ret = of_property_read_u32_array(dev->of_node, pname,
> > + (u32 *)memcpy_ch, nelm);
> > if (ret)
> > return ERR_PTR(ret);
> >
> > diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
> > index 105700e62ea1..0a533f94438f 100644
> > --- a/include/linux/platform_data/edma.h
> > +++ b/include/linux/platform_data/edma.h
> > @@ -76,7 +76,7 @@ struct edma_soc_info {
> > struct edma_rsv_info *rsv;
> >
> > /* List of channels allocated for memcpy, terminated with -1 */
> > - s16 *memcpy_channels;
> > + s32 *memcpy_channels;
> >
> > s8 (*queue_priority_mapping)[2];
> > const s16 (*xbar_chans)[2];
> > --
> > 2.6.3
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
