On 01/29/2014 01:21 PM, Christoph Fritz wrote:
On Tue, 2014-01-28 at 18:02 +0100, Christoph Fritz wrote:
On Tue, 2014-01-28 at 15:40 +0200, Tero Kristo wrote:
Due to a regression since next-20140122 the following errors are present:
- pin sys_clkout2, which gets configured to 24 Mhz by the fourth patch
in this set, erroneously outputs only 12 Mhz.
Just out of curiosity, configuring it to 48 Mhz puts out desired 24 Mhz.
- omap_dss, which gets configured by the third patch in this set, fails
to do 'dss_set_fck_rate(fck);' in
drivers/video/omap2/dss/dss.c:dss_setup_default_clock() which leads to:
| omapdss_dss: probe of omapdss_dss failed with error -22
| omapdss CORE error: Failed to initialize DSS platform driver
| panel-dpi panel-dpi.0: failed to find video source 'dpi.0
Both regressions seem to have something to do with the clock framework.
Could this be related to the DT clock conversion patches?
Yea its definitely possible, as the clock DT conversion touches pretty
much everything. Have you tried whether this works properly with legacy
boot? Personally I don't have access to any omap3 devices that would
have display and have no possibility to check this out myself. Anyway,
my initial guess is that some clock divider setup might be wrong with
omap3, or we are missing some ti,set-rate-parent flag for some clock
node which prevents escalating clk_set_rate properly. However, it should
be easy to debug this by looking at the clock node in question, and its
parent nodes to see if there are any problems.
Currently I only analyzed sys_clkout2 (see attachments for full
clk_summary files):
clk_summary__next-20140115__works_as_expected:
dpll4_m2_ck 1 1 96000000
dpll4_m2x2_ck 1 1 96000000
omap_192m_alwon_fck 1 1 96000000
omap_96m_alwon_fck 1 2 96000000
per_96m_fck 0 6 96000000
mcbsp4_fck 0 1 96000000
mcbsp3_fck 0 2 96000000
mcbsp2_fck 0 2 96000000
cm_96m_fck 2 3 96000000
clkout2_src_ck 1 1 96000000
sys_clkout2 1 1 24000000
For real, on pin sys_clkout2 are correctly 24 Mhz measured.
clk_summary__next-20140124__sysclkout2_dss_fails:
dpll4_m2_ck 1 1 96000000
dpll4_m2x2_mul_ck 1 1 192000000
dpll4_m2x2_ck 1 1 192000000
omap_192m_alwon_fck 0 0 192000000
omap_96m_alwon_fck 1 2 192000000
per_96m_fck 0 6 192000000
mcbsp4_fck 0 1 192000000
mcbsp3_fck 0 2 192000000
mcbsp2_fck 0 2 192000000
cm_96m_fck 2 3 192000000
clkout2_src_ck 1 1 192000000
sys_clkout2 1 1 24000000
For real, on pin sys_clkout2 are only ~12 Mhz measured.
Hey Christoph,
I had a chance to look at this in more detail, and it looks like your
patch above was almost the correct one (except that I think you modified
wrong property and also modified the clock node for all omap3 variants.)
Can you give this one a shot? Can you also send me the clk-summary dump
with this patch (with the relevant nodes)?
From: Tero Kristo <t-kristo@xxxxxx>
Date: Tue, 4 Feb 2014 17:37:37 +0200
Subject: [PATCH] ARM: dts: omap36xx: fix omap96m_alwon_fck
OMAP36xx has different hardware implementation for the omap96m_alwon_fck
compared to other OMAP3 variants. Reflect this properly in the dts file.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/boot/dts/omap36xx-clocks.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi
b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 2fcf253..24869cb 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -70,6 +70,10 @@
};
};
+&omap_96m_alwon_fck {
+ clock-div = <2>;
+};
+
&cm_clockdomains {
dpll4_clkdm: dpll4_clkdm {
compatible = "ti,clockdomain";
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
