On Thursday, January 23, 2014 2:20 AM, Jenny TC wrote:
>
> This patch introduces BQ24261 charger driver. The driver makes use of power
> supply charging driver to setup charging. So the driver does hardware
> abstraction and handles h/w specific corner cases. The charging logic resides
> with power supply charging driver
>
> Signed-off-by: Jenny TC <jenny.tc@xxxxxxxxx>
Hi Jenny,
Thank you for including me.
I added some minor comments. :-)
> ---
> drivers/power/Kconfig | 10 +
> drivers/power/Makefile | 1 +
> drivers/power/bq24261_charger.c | 1447 +++++++++++++++++++++++++++++++++
> include/linux/power/bq24261_charger.h | 33 +
> 4 files changed, 1491 insertions(+)
> create mode 100644 drivers/power/bq24261_charger.c
> create mode 100644 include/linux/power/bq24261_charger.h
>
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 655457b..3f32f61 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -408,6 +408,16 @@ config BATTERY_GOLDFISH
> Say Y to enable support for the battery and AC power in the
> Goldfish emulator.
>
> +config BQ24261_CHARGER
> + tristate "BQ24261 charger driver"
> + select POWER_SUPPLY_CHARGER
> + depends on I2C
> + help
> + Say Y to include support for BQ24261 Charger driver. This driver
> + makes use of power supply charging driver. So the driver gives
> + the charger hardware abstraction only. Charging logic is abstracted
> + in the power supply charging driver.
> +
> source "drivers/power/reset/Kconfig"
>
> endif # POWER_SUPPLY
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 77535fd..6d184c8 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -59,4 +59,5 @@ obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
> obj-$(CONFIG_POWER_AVS) += avs/
> obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
> obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
> +obj-$(CONFIG_BQ24261_CHARGER) += bq24261_charger.o
> obj-$(CONFIG_POWER_RESET) += reset/
> diff --git a/drivers/power/bq24261_charger.c b/drivers/power/bq24261_charger.c
> new file mode 100644
> index 0000000..6ac063b
> --- /dev/null
> +++ b/drivers/power/bq24261_charger.c
> @@ -0,0 +1,1447 @@
> +/*
> + * bq24261_charger.c - BQ24261 Charger I2C client driver
> + *
> + * Copyright (C) 2011 Intel Corporation
> + *
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + * Author: Jenny TC <jenny.tc@xxxxxxxxx>
> + */
> +#define DEBUG
Please insert one line between the comment and the "#define".
> +#include <linux/version.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/power_supply.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/io.h>
> +#include <linux/sched.h>
> +#include <linux/delay.h>
> +#include <linux/usb/otg.h>
> +#include <linux/power/power_supply_charger.h>
> +#include <linux/power/bq24261_charger.h>
> +#include <linux/seq_file.h>
Would you re-order these headers alphabetically?
It enhances the readability.
> +
> +#include <asm/intel_scu_ipc.h>
> +
> +#define DEV_NAME "bq24261_charger"
> +#define DEV_MANUFACTURER "TI"
> +#define MODEL_NAME_SIZE 8
> +#define DEV_MANUFACTURER_NAME_SIZE 4
> +
> +#define EXCEPTION_MONITOR_DELAY (60 * HZ)
> +#define WDT_RESET_DELAY (15 * HZ)
> +
> +/* BQ24261 registers */
> +#define BQ24261_STAT_CTRL0_ADDR 0x00
> +#define BQ24261_CTRL_ADDR 0x01
> +#define BQ24261_BATT_VOL_CTRL_ADDR 0x02
> +#define BQ24261_VENDOR_REV_ADDR 0x03
> +#define BQ24261_TERM_FCC_ADDR 0x04
> +#define BQ24261_VINDPM_STAT_ADDR 0x05
> +#define BQ24261_ST_NTC_MON_ADDR 0x06
> +
> +#define BQ24261_RESET_MASK (0x01 << 7)
> +#define BQ24261_RESET_ENABLE (0x01 << 7)
> +
> +#define BQ24261_FAULT_MASK 0x07
> +#define BQ24261_STAT_MASK (0x03 << 4)
> +#define BQ24261_BOOST_MASK (0x01 << 6)
> +#define BQ24261_TMR_RST_MASK (0x01 << 7)
> +#define BQ24261_TMR_RST (0x01 << 7)
> +
> +#define BQ24261_ENABLE_BOOST (0x01 << 6)
> +
> +#define BQ24261_VOVP 0x01
> +#define BQ24261_LOW_SUPPLY 0x02
> +#define BQ24261_THERMAL_SHUTDOWN 0x03
> +#define BQ24261_BATT_TEMP_FAULT 0x04
> +#define BQ24261_TIMER_FAULT 0x05
> +#define BQ24261_BATT_OVP 0x06
> +#define BQ24261_NO_BATTERY 0x07
> +#define BQ24261_STAT_READY 0x00
> +
> +#define BQ24261_STAT_CHRG_PRGRSS (0x01 << 4)
> +#define BQ24261_STAT_CHRG_DONE (0x02 << 4)
> +#define BQ24261_STAT_FAULT (0x03 << 4)
> +
> +#define BQ24261_CE_MASK (0x01 << 1)
> +#define BQ24261_CE_DISABLE (0x01 << 1)
> +
> +#define BQ24261_HZ_MASK (0x01)
> +#define BQ24261_HZ_ENABLE (0x01)
> +
> +#define BQ24261_ICHRG_MASK (0x1F << 3)
> +#define BQ24261_ICHRG_100ma (0x01 << 3)
> +#define BQ24261_ICHRG_200ma (0x01 << 4)
> +#define BQ24261_ICHRG_400ma (0x01 << 5)
> +#define BQ24261_ICHRG_800ma (0x01 << 6)
> +#define BQ24261_ICHRG_1600ma (0x01 << 7)
> +
> +#define BQ24261_ITERM_MASK (0x03)
> +#define BQ24261_ITERM_50ma (0x01 << 0)
> +#define BQ24261_ITERM_100ma (0x01 << 1)
> +#define BQ24261_ITERM_200ma (0x01 << 2)
> +
> +#define BQ24261_VBREG_MASK (0x3F << 2)
> +
> +#define BQ24261_INLMT_MASK (0x03 << 4)
> +#define BQ24261_INLMT_100 0x00
> +#define BQ24261_INLMT_150 (0x01 << 4)
> +#define BQ24261_INLMT_500 (0x02 << 4)
> +#define BQ24261_INLMT_900 (0x03 << 4)
> +#define BQ24261_INLMT_1500 (0x04 << 4)
> +#define BQ24261_INLMT_2500 (0x06 << 4)
> +
> +#define BQ24261_TE_MASK (0x01 << 2)
> +#define BQ24261_TE_ENABLE (0x01 << 2)
> +#define BQ24261_STAT_ENABLE_MASK (0x01 << 3)
> +#define BQ24261_STAT_ENABLE (0x01 << 3)
> +
> +#define BQ24261_VENDOR_MASK (0x07 << 5)
> +#define BQ24261_VENDOR (0x02 << 5)
> +#define BQ24261_REV_MASK (0x07)
> +#define BQ24261_REV (0x02)
> +#define BQ24260_REV (0x01)
> +
> +#define BQ24261_TS_MASK (0x01 << 3)
> +#define BQ24261_TS_ENABLED (0x01 << 3)
> +#define BQ24261_BOOST_ILIM_MASK (0x01 << 4)
> +#define BQ24261_BOOST_ILIM_500ma (0x0)
> +#define BQ24261_BOOST_ILIM_1A (0x01 << 4)
> +
> +#define BQ24261_SAFETY_TIMER_MASK (0x03 << 5)
> +#define BQ24261_SAFETY_TIMER_40MIN 0x00
> +#define BQ24261_SAFETY_TIMER_6HR (0x01 << 5)
> +#define BQ24261_SAFETY_TIMER_9HR (0x02 << 5)
> +#define BQ24261_SAFETY_TIMER_DISABLED (0x03 << 5)
> +
> +/* 1% above voltage max design to report over voltage */
> +#define BQ24261_OVP_MULTIPLIER 1010
> +#define BQ24261_OVP_RECOVER_MULTIPLIER 990
> +#define BQ24261_DEF_BAT_VOLT_MAX_DESIGN 4200000
> +
> +/* Settings for Voltage / DPPM Register (05) */
> +#define BQ24261_VBATT_LEVEL1 3700000
> +#define BQ24261_VBATT_LEVEL2 3960000
> +#define BQ24261_VINDPM_MASK (0x07)
> +#define BQ24261_VINDPM_320MV (0x01 << 2)
> +#define BQ24261_VINDPM_160MV (0x01 << 1)
> +#define BQ24261_VINDPM_80MV (0x01 << 0)
> +#define BQ24261_CD_STATUS_MASK (0x01 << 3)
> +#define BQ24261_DPM_EN_MASK (0x01 << 4)
> +#define BQ24261_DPM_EN_FORCE (0x01 << 4)
> +#define BQ24261_LOW_CHG_MASK (0x01 << 5)
> +#define BQ24261_LOW_CHG_EN (0x01 << 5)
> +#define BQ24261_LOW_CHG_DIS (~BQ24261_LOW_CHG_EN)
> +#define BQ24261_DPM_STAT_MASK (0x01 << 6)
> +#define BQ24261_MINSYS_STAT_MASK (0x01 << 7)
> +
> +#define BQ24261_MIN_CC 500
> +
> +u16 bq24261_sfty_tmr[][2] = {
> + {0, BQ24261_SAFETY_TIMER_DISABLED}
> + ,
> + {40, BQ24261_SAFETY_TIMER_40MIN}
> + ,
> + {360, BQ24261_SAFETY_TIMER_6HR}
> + ,
> + {540, BQ24261_SAFETY_TIMER_9HR}
> + ,
> +};
> +
> +
> +u16 bq24261_inlmt[][2] = {
> + {100, BQ24261_INLMT_100}
> + ,
> + {150, BQ24261_INLMT_150}
> + ,
> + {500, BQ24261_INLMT_500}
> + ,
> + {900, BQ24261_INLMT_900}
> + ,
> + {1500, BQ24261_INLMT_1500}
> + ,
> + {2500, BQ24261_INLMT_2500}
> + ,
> +};
> +
> +u16 bq24261_iterm[][2] = {
> + {0, 0x00}
> + ,
> + {50, BQ24261_ITERM_50ma}
> + ,
> + {100, BQ24261_ITERM_100ma}
> + ,
> + {150, BQ24261_ITERM_100ma | BQ24261_ITERM_50ma}
> + ,
> + {200, BQ24261_ITERM_200ma}
> + ,
> + {250, BQ24261_ITERM_200ma | BQ24261_ITERM_50ma}
> + ,
> + {300, BQ24261_ITERM_200ma | BQ24261_ITERM_100ma}
> + ,
> + {350, BQ24261_ITERM_200ma | BQ24261_ITERM_100ma | BQ24261_ITERM_50ma}
> + ,
> +};
> +
> +u16 bq24261_cc[][2] = {
> +
> + {500, 0x00}
> + ,
> + {600, BQ24261_ICHRG_100ma}
> + ,
> + {700, BQ24261_ICHRG_200ma}
> + ,
> + {800, BQ24261_ICHRG_100ma | BQ24261_ICHRG_200ma}
> + ,
> + {900, BQ24261_ICHRG_400ma}
> + ,
> + {1000, BQ24261_ICHRG_400ma | BQ24261_ICHRG_100ma}
> + ,
> + {1100, BQ24261_ICHRG_400ma | BQ24261_ICHRG_200ma}
> + ,
> + {1200, BQ24261_ICHRG_400ma | BQ24261_ICHRG_200ma | BQ24261_ICHRG_100ma}
> + ,
> + {1300, BQ24261_ICHRG_800ma}
> + ,
> + {1400, BQ24261_ICHRG_800ma | BQ24261_ICHRG_100ma}
> + ,
> + {1500, BQ24261_ICHRG_800ma | BQ24261_ICHRG_200ma}
> + ,
> +};
These 'u16 bq24261_*' looks to be used in only this file.
Would you change these 'u16 bq24261_*' to 'static u16 bq24261_*'?
For example,
static u16 bq24261_sfty_tmr[][2] = {
[.....]
> +static void lookup_regval(u16 tbl[][2], size_t size, u16 in_val, u8 *out_val)
> +{
> + int i;
> + for (i = 1; i < size; ++i)
Please insert one line between variable and 'for' loop.
> + if (in_val < tbl[i][0])
> + break;
> +
> + *out_val = (u8) tbl[i - 1][1];
> +}
> +
> +void bq24261_cc_to_reg(int cc, u8 *reg_val)
> +{
> + return lookup_regval(bq24261_cc, ARRAY_SIZE(bq24261_cc), cc, reg_val);
> +
> +}
> +
> +void bq24261_cv_to_reg(int cv, u8 *reg_val)
> +{
> + int val;
> +
> + val = clamp_t(int, cv, BQ24261_MIN_CV, BQ24261_MAX_CV);
> + *reg_val =
> + (((val - BQ24261_MIN_CV) / BQ24261_CV_DIV)
> + << BQ24261_CV_BIT_POS);
> +}
> +
> +void bq24261_inlmt_to_reg(int inlmt, u8 *regval)
> +{
> + return lookup_regval(bq24261_inlmt, ARRAY_SIZE(bq24261_inlmt),
> + inlmt, regval);
> +}
How about making these functions static?
For instance,
static void bq24261_cc_to_reg(int cc, u8 *reg_val)
> +
> +static inline void bq24261_iterm_to_reg(int iterm, u8 *regval)
> +{
> + return lookup_regval(bq24261_iterm, ARRAY_SIZE(bq24261_iterm),
> + iterm, regval);
> +}
> +
> +static inline void bq24261_sfty_tmr_to_reg(int tmr, u8 *regval)
> +{
> + return lookup_regval(bq24261_sfty_tmr, ARRAY_SIZE(bq24261_sfty_tmr),
> + tmr, regval);
> +}
> +
> +static inline int bq24261_read_reg(struct i2c_client *client, u8 reg)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(client, reg);
> + if (ret < 0)
> + dev_err(&client->dev, "Error(%d) in reading reg %d\n", ret,
> + reg);
> +
> + return ret;
> +}
> +
> +static inline int bq24261_write_reg(struct i2c_client *client, u8 reg, u8 data)
> +{
> + int ret;
> +
> + ret = i2c_smbus_write_byte_data(client, reg, data);
> + if (ret < 0)
> + dev_err(&client->dev, "Error(%d) in writing %d to reg %d\n",
> + ret, data, reg);
> +
> + return ret;
> +}
> +
> +static inline int bq24261_read_modify_reg(struct i2c_client *client, u8 reg,
> + u8 mask, u8 val)
> +{
> + int ret;
> +
> + ret = bq24261_read_reg(client, reg);
> + if (ret < 0)
> + return ret;
> + ret = (ret & ~mask) | (mask & val);
> + return bq24261_write_reg(client, reg, ret);
> +}
> +
> +static inline int bq24261_tmr_ntc_init(struct bq24261_charger *chip)
> +{
> + u8 reg_val;
> + int ret;
> +
> + bq24261_sfty_tmr_to_reg(chip->pdata->safety_timer, ®_val);
> +
> + if (chip->pdata->is_ts_enabled)
> + reg_val |= BQ24261_TS_ENABLED;
> +
> + ret = bq24261_read_modify_reg(chip->client, BQ24261_ST_NTC_MON_ADDR,
> + BQ24261_TS_MASK|BQ24261_SAFETY_TIMER_MASK|
> + BQ24261_BOOST_ILIM_MASK, reg_val);
> +
> + return ret;
> +}
> +
> +static inline int bq24261_enable_charging(
> + struct bq24261_charger *chip, bool val)
> +{
> + int ret;
> + u8 reg_val;
> + bool is_ready;
> +
> + ret = bq24261_read_reg(chip->client,
> + BQ24261_STAT_CTRL0_ADDR);
> + if (ret < 0) {
> + dev_err(&chip->client->dev,
> + "Error(%d) in reading BQ24261_STAT_CTRL0_ADDR\n", ret);
> + }
> +
> + is_ready = (ret & BQ24261_STAT_MASK) != BQ24261_STAT_FAULT;
> +
> + /* If status is fault, wait for READY before enabling the charging */
> +
> + if (!is_ready) {
> + ret = wait_event_timeout(chip->wait_ready,
> + (chip->chrgr_stat != BQ24261_CHRGR_STAT_READY),
> + HZ);
> + dev_info(&chip->client->dev,
> + "chrgr_stat=%x\n", chip->chrgr_stat);
> + if (ret == 0) {
> + dev_err(&chip->client->dev,
> + "Waiting for Charger Ready Failed.Enabling charging anyway\n");
> + }
> + }
> +
> + if (val) {
> + reg_val = (~BQ24261_CE_DISABLE & BQ24261_CE_MASK);
> + if (chip->is_hw_chrg_term)
> + reg_val |= BQ24261_TE_ENABLE;
> + } else {
> + reg_val = BQ24261_CE_DISABLE;
> + }
> +
> + reg_val |= BQ24261_STAT_ENABLE;
> +
> + ret = bq24261_read_modify_reg(chip->client, BQ24261_CTRL_ADDR,
> + BQ24261_STAT_ENABLE_MASK|BQ24261_RESET_MASK|
> + BQ24261_CE_MASK|BQ24261_TE_MASK,
> + reg_val);
> + if (ret || !val) {
> + cancel_delayed_work_sync(&chip->notify_work);
> + return ret;
> + }
> +
> + bq24261_set_iterm(chip, chip->iterm);
> + schedule_delayed_work(&chip->notify_work, 0);
> + bq24261_enable_hw_charge_term(chip, true);
> + return bq24261_tmr_ntc_init(chip);
> +}
> +
> +static inline int bq24261_reset_timer(struct bq24261_charger *chip)
> +{
> + return bq24261_read_modify_reg(chip->client, BQ24261_STAT_CTRL0_ADDR,
> + BQ24261_TMR_RST_MASK, BQ24261_TMR_RST);
> +}
> +
> +static inline int bq24261_enable_charger(
> + struct bq24261_charger *chip, int val)
> +{
> +
> + /* TODO: Implement enable/disable HiZ mode to enable/
> + * disable charger
> + */
According to the Coding Style, the preferred style for long (multi-line)
comments is:
+ /*
+ * TODO: Implement enable/disable HiZ mode to enable/
+ * disable charger
+ */
> + u8 reg_val;
> + int ret;
> +
> + reg_val = val ? (~BQ24261_HZ_ENABLE & BQ24261_HZ_MASK) :
> + BQ24261_HZ_ENABLE;
> +
> + ret = bq24261_read_modify_reg(chip->client, BQ24261_CTRL_ADDR,
> + BQ24261_HZ_MASK|BQ24261_RESET_MASK, reg_val);
> + if (ret)
> + return ret;
> +
> + return bq24261_reset_timer(chip);
> +}
> +
> +static inline int bq24261_set_cc(struct bq24261_charger *chip, int cc)
> +{
> + u8 reg_val;
> + int ret;
> +
> + dev_dbg(&chip->client->dev, "cc=%d\n", cc);
> +
> + if (cc && (cc < BQ24261_MIN_CC)) {
> + dev_dbg(&chip->client->dev, "Set LOW_CHG bit\n");
> + reg_val = BQ24261_LOW_CHG_EN;
> + ret = bq24261_read_modify_reg(chip->client,
> + BQ24261_VINDPM_STAT_ADDR,
> + BQ24261_LOW_CHG_MASK, reg_val);
> + } else {
> + dev_dbg(&chip->client->dev, "Clear LOW_CHG bit\n");
> + reg_val = BQ24261_LOW_CHG_DIS;
> + ret = bq24261_read_modify_reg(chip->client,
> + BQ24261_VINDPM_STAT_ADDR,
> + BQ24261_LOW_CHG_MASK, reg_val);
> + }
> +
> + bq24261_cc_to_reg(cc, ®_val);
> +
> + return bq24261_read_modify_reg(chip->client, BQ24261_TERM_FCC_ADDR,
> + BQ24261_ICHRG_MASK, reg_val);
> +}
> +
> +static inline int bq24261_set_cv(struct bq24261_charger *chip, int cv)
> +{
> + int bat_volt;
> + int ret;
> + u8 reg_val;
> + u8 vindpm_val = 0x0;
> +
> + /*
> + * Setting VINDPM value as per the battery voltage
> + * VBatt Vindpm Register Setting
> + * < 3.7v 4.2v 0x0 (default)
> + * 3.71v - 3.96v 4.36v 0x2
> + * > 3.96v 4.6v 0x5
> + */
> + ret = get_battery_voltage(&bat_volt);
> + if (ret) {
> + dev_err(&chip->client->dev,
> + "Error getting battery voltage!!\n");
> + } else {
> + if (bat_volt > BQ24261_VBATT_LEVEL2)
> + vindpm_val =
> + (BQ24261_VINDPM_320MV | BQ24261_VINDPM_80MV);
> + else if (bat_volt > BQ24261_VBATT_LEVEL1)
> + vindpm_val = BQ24261_VINDPM_160MV;
> + }
> +
> + ret = bq24261_read_modify_reg(chip->client,
> + BQ24261_VINDPM_STAT_ADDR,
> + BQ24261_VINDPM_MASK,
> + vindpm_val);
> + if (ret) {
> + dev_err(&chip->client->dev,
> + "Error setting VINDPM setting!!\n");
> + return ret;
> + }
> +
> +
> + bq24261_cv_to_reg(cv, ®_val);
> +
> + return bq24261_read_modify_reg(chip->client, BQ24261_BATT_VOL_CTRL_ADDR,
> + BQ24261_VBREG_MASK, reg_val);
> +}
> +
> +static inline int bq24261_set_inlmt(struct bq24261_charger *chip, int inlmt)
> +{
> + u8 reg_val;
> +
> + bq24261_inlmt_to_reg(inlmt, ®_val);
> +
> + return bq24261_read_modify_reg(chip->client, BQ24261_CTRL_ADDR,
> + BQ24261_RESET_MASK|BQ24261_INLMT_MASK, reg_val);
> +
> +}
> +
> +static inline void resume_charging(struct bq24261_charger *chip)
> +{
> +
> + if (chip->is_charger_enabled)
> + bq24261_enable_charger(chip, true);
> + if (chip->inlmt)
> + bq24261_set_inlmt(chip, chip->inlmt);
> + if (chip->cc)
> + bq24261_set_cc(chip, chip->cc);
> + if (chip->cv)
> + bq24261_set_cv(chip, chip->cv);
> + if (chip->is_charging_enabled)
> + bq24261_enable_charging(chip, true);
> +}
> +
> +static inline int bq24261_set_iterm(struct bq24261_charger *chip, int iterm)
> +{
> + u8 reg_val;
> +
> + bq24261_iterm_to_reg(iterm, ®_val);
> +
> + return bq24261_read_modify_reg(chip->client, BQ24261_TERM_FCC_ADDR,
> + BQ24261_ITERM_MASK, reg_val);
> +}
> +
> +static inline int bq24261_enable_hw_charge_term(
> + struct bq24261_charger *chip, bool val)
> +{
> + u8 data;
> + int ret;
> +
> + data = val ? BQ24261_TE_ENABLE : (~BQ24261_TE_ENABLE & BQ24261_TE_MASK);
> +
> +
> + ret = bq24261_read_modify_reg(chip->client, BQ24261_CTRL_ADDR,
> + BQ24261_RESET_MASK|BQ24261_TE_MASK, data);
> +
> + if (ret)
> + return ret;
> +
> + chip->is_hw_chrg_term = val ? true : false;
> +
> + return ret;
> +}
> +
> +
Remove unnecessary line.
> +static inline bool bq24261_is_vsys_on(struct bq24261_charger *chip)
> +{
> + int ret;
> + struct i2c_client *client = chip->client;
> +
> + ret = bq24261_read_reg(client, BQ24261_CTRL_ADDR);
> + if (ret < 0) {
> + dev_err(&client->dev,
> + "Error(%d) in reading BQ24261_CTRL_ADDR\n", ret);
> + return false;
> + }
> +
> + if (((ret & BQ24261_HZ_MASK) == BQ24261_HZ_ENABLE) &&
> + chip->is_charger_enabled) {
> + dev_err(&client->dev, "Charger in Hi Z Mode\n");
> + return false;
> + }
> +
> + ret = bq24261_read_reg(client, BQ24261_VINDPM_STAT_ADDR);
> + if (ret < 0) {
> + dev_err(&client->dev,
> + "Error(%d) in reading BQ24261_VINDPM_STAT_ADDR\n", ret);
> + return false;
> + }
> +
> + if (ret & BQ24261_CD_STATUS_MASK) {
> + dev_err(&client->dev, "CD line asserted\n");
> + return false;
> + }
> +
> + return true;
> +}
> +
> +
Remove unnecessary line.
> +static inline bool is_bq24261_enabled(struct bq24261_charger *chip)
> +{
> + if (chip->cable_type == PSY_CHARGER_CABLE_TYPE_NONE)
> + return false;
> + else if (!chip->is_charger_enabled)
> + return false;
> + /* BQ24261 gives interrupt only on stop/resume charging.
> + * If charging is already stopped, we need to query the hardware
> + * to see charger is still active and can supply vsys or not.
> + */
According to the Coding Style, the preferred style for long (multi-line)
comments is:
+ /*
+ * BQ24261 gives interrupt only on stop/resume charging.
+ * If charging is already stopped, we need to query the hardware
+ * to see charger is still active and can supply vsys or not.
+ */
> + else if ((chip->chrgr_stat == BQ24261_CHRGR_STAT_FAULT) ||
> + (!chip->is_charging_enabled))
> + return bq24261_is_vsys_on(chip);
> + else
> + return chip->is_vsys_on;
> +}
> +
> +static int bq24261_usb_psyc_set_property(struct power_supply_charger *psyc,
> + enum power_supply_charger_property pscp,
> + const union power_supply_propval *val)
> +{
> + struct bq24261_charger *chip = container_of(psyc,
> + struct bq24261_charger,
> + psyc_usb);
> + int ret = 0;
For the readability, how about the following?
struct bq24261_charger *chip;
int ret = 0;
chip = container_of(psyc, struct bq24261_charger, psyc_usb);
> +
> + mutex_lock(&chip->lock);
> + dev_dbg(&chip->client->dev, "%s: prop=%d, val=%d\n",
> + __func__, pscp, val->intval);
> +
> + switch (pscp) {
> +
> + case POWER_SUPPLY_CHARGER_PROP_ENABLE_CHARGING:
> + ret = bq24261_enable_charging(chip, val->intval);
> +
> + if (ret)
> + dev_err(&chip->client->dev,
> + "Error(%d) in %s charging", ret,
> + (val->intval ? "enable" : "disable"));
> + else
> + chip->is_charging_enabled = val->intval;
> +
> + break;
> + case POWER_SUPPLY_CHARGER_PROP_ENABLE_CHARGER:
> + /* Don't enable the charger unless overvoltage is recovered */
> +
> + if (chip->bat_health != POWER_SUPPLY_HEALTH_OVERVOLTAGE) {
> + ret = bq24261_enable_charger(chip, val->intval);
> +
> + if (ret)
> + dev_err(&chip->client->dev,
> + "Error(%d) in %s charger", ret,
> + (val->intval ? "enable" : "disable"));
> + else
> + chip->is_charger_enabled = val->intval;
> + } else {
> + dev_info(&chip->client->dev, "Battery Over Voltage. Charger will be disabled\n");
> + }
> + break;
> + case POWER_SUPPLY_CHARGER_PROP_CABLE_TYPE:
> + chip->cable_type = val->intval;
> + chip->psy_usb.type = get_power_supply_type(chip->cable_type);
> + if (chip->cable_type != PSY_CHARGER_CABLE_TYPE_NONE) {
> + chip->chrgr_health = POWER_SUPPLY_HEALTH_GOOD;
> + chip->chrgr_stat = BQ24261_CHRGR_STAT_UNKNOWN;
> +
> + /* Adding this processing in order to check
> + for any faults during connect */
> +
> + ret = bq24261_read_reg(chip->client,
> + BQ24261_STAT_CTRL0_ADDR);
> + if (ret < 0)
> + dev_err(&chip->client->dev,
> + "Error (%d) in reading status register(0x00)\n",
> + ret);
> + else
> + bq24261_handle_irq(chip, ret);
> + } else {
> + chip->chrgr_stat = BQ24261_CHRGR_STAT_UNKNOWN;
> + chip->chrgr_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + cancel_delayed_work_sync(&chip->low_supply_fault_work);
> + }
> + break;
> + case POWER_SUPPLY_CHARGER_PROP_RESET_WDT:
> + bq24261_reset_timer(chip);
> + break;
> + default:
> + ret = -ENODATA;
> + }
> +
> + mutex_unlock(&chip->lock);
> + return ret;
> +}
> +
> +static int bq24261_usb_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + struct bq24261_charger *chip = container_of(psy,
> + struct bq24261_charger,
> + psy_usb);
> + int ret = 0;
For the readability, how about the following?
struct bq24261_charger *chip;
int ret = 0;
chip = container_of(psyc, struct bq24261_charger, psyc_usb);
> +
> + mutex_lock(&chip->lock);
> +
> + switch (psp) {
> +
> + case POWER_SUPPLY_PROP_PRESENT:
> + chip->present = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_ONLINE:
> + chip->online = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = bq24261_set_cc(chip, val->intval);
> + if (!ret)
> + chip->cc = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = bq24261_set_cv(chip, val->intval);
> + if (!ret)
> + chip->cv = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + chip->max_cc = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> + chip->max_cv = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CUR:
> + ret = bq24261_set_iterm(chip, val->intval);
> + if (!ret)
> + chip->iterm = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_INLMT:
> + ret = bq24261_set_inlmt(chip, val->intval);
> + if (!ret)
> + chip->inlmt = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
> + chip->cntl_state = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_TEMP_MAX:
> + chip->max_temp = val->intval;
> + break;
> + case POWER_SUPPLY_PROP_TEMP_MIN:
> + chip->min_temp = val->intval;
> + break;
> + default:
> + ret = -ENODATA;
> + }
> +
> + mutex_unlock(&chip->lock);
> + return ret;
> +}
> +
> +static int bq24261_usb_psyc_get_property(struct power_supply_charger *psyc,
> + enum power_supply_charger_property pscp,
> + union power_supply_propval *val)
> +{
> + struct bq24261_charger *chip = container_of(psyc,
> + struct bq24261_charger,
> + psyc_usb);
> +
For the readability, how about the following?
struct bq24261_charger *chip;
chip = container_of(psyc, struct bq24261_charger, psyc_usb);
> + mutex_lock(&chip->lock);
> +
> + switch (pscp) {
> + case POWER_SUPPLY_CHARGER_PROP_CABLE_TYPE:
> + val->intval = chip->cable_type;
> + break;
> + case POWER_SUPPLY_CHARGER_PROP_ENABLE_CHARGING:
> + val->intval = (chip->is_charging_enabled &&
> + (chip->chrgr_stat == BQ24261_CHRGR_STAT_CHARGING));
> +
> + break;
> + case POWER_SUPPLY_CHARGER_PROP_ENABLE_CHARGER:
> + val->intval = is_bq24261_enabled(chip);
> + break;
> + default:
> + mutex_unlock(&chip->lock);
> + return -EINVAL;
> + }
> +
> + mutex_unlock(&chip->lock);
> + return 0;
> +}
> +
> +static int bq24261_usb_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct bq24261_charger *chip = container_of(psy,
> + struct bq24261_charger,
> + psy_usb);
> +
For the readability, how about the following?
struct bq24261_charger *chip;
chip = container_of(psyc, struct bq24261_charger, psyc_usb);
[.....]
> +
> +MODULE_DEVICE_TABLE(i2c, bq24261_id);
> +
> +static struct i2c_driver bq24261_driver = {
> + .driver = {
> + .name = DEV_NAME,
> + },
Please fix indent problem as below:
+ },
> + .probe = bq24261_probe,
> + .remove = bq24261_remove,
> + .id_table = bq24261_id,
> +};
> +
> +static int __init bq24261_init(void)
> +{
> + return i2c_add_driver(&bq24261_driver);
> +}
> +
> +module_init(bq24261_init);
> +
> +static void __exit bq24261_exit(void)
> +{
> + i2c_del_driver(&bq24261_driver);
> +}
> +
> +module_exit(bq24261_exit);
Please use module_i2c_driver() macro in order to make the code
simpler. Then, above 13 lines can be one line as below.
module_i2c_driver(bq24261_driver);
> +
> +MODULE_AUTHOR("Jenny TC <jenny.tc@xxxxxxxxx>");
> +MODULE_DESCRIPTION("BQ24261 Charger Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/power/bq24261_charger.h b/include/linux/power/bq24261_charger.h
> new file mode 100644
> index 0000000..e6b399f
> --- /dev/null
> +++ b/include/linux/power/bq24261_charger.h
> @@ -0,0 +1,33 @@
> +/*
> + * bq24261_charger.h: platform data structure for bq24261 driver
> + *
> + * (C) Copyright 2012 Intel Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; version 2
> + * of the License.
> + */
> +
> +#ifndef __BQ24261_CHARGER_H__
> +#define __BQ24261_CHARGER_H__
> +
> +struct bq24261_plat_data {
> + char **supplied_to;
> + size_t num_supplicants;
> + struct psy_throttle_state *throttle_states;
> + size_t num_throttle_states;
> + int safety_timer;
> + bool is_ts_enabled;
> +
> + int (*enable_charging) (bool val);
> + int (*enable_charger) (bool val);
> + int (*set_inlmt) (int val);
> + int (*set_cc) (int val);
> + int (*set_cv) (int val);
> + int (*set_iterm) (int val);
> + int (*enable_vbus) (int val);
> +};
> +
> +
Remove unnecessary line. One line is good.
> +#endif
> --
> 1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
