Re: [PATCH] arm: dtsi: am335x-bone-common, usb0 is peripheral only

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Feb 13, 2014 at 02:54:38PM -0800, Tony Lindgren wrote:
> * Markus Pargmann <mpa@xxxxxxxxxxxxxx> [140111 06:03]:
> > The PMIC is using usb0 vbus line as power source. It is also connected
> > to the am335x processor as vbus sense. But there is no possibility to
> > pullup usb0 vbus to operate as host. This patch fixes the dr_mode of usb0.
> 
> That's the MUSB? AFAIK it's not possible to operate MUSB in peripheral
> only mode because the hardware does what it wants based on the ID
> pin state.

Yes that's MUSB. The am335x reference manual describes that it is
possible to force peripheral/host mode by setting bit 7 (IDDIG_MUX) in
register USBnMODE to 1. Then it uses the bit written in bit 8 (IDDIG) of
register USBnMODE to set host/peripheral mode.

I am not sure if the driver supports it yet but I think the DTS should
contain the correct mode nevertheless, especially to avoid starting the
otg loops in the musb driver.

Regards,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux