We need to use set-rate-parent for dpll4_m4 clock path, so use the ti,fixed-factor-clock version which supports set-rate-parent property. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> --- arch/arm/boot/dts/omap36xx-clocks.dtsi | 2 +- arch/arm/boot/dts/omap3xxx-clocks.dtsi | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 0b2df76b9d38..6b5280d04a0e 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -79,7 +79,7 @@ }; &dpll4_m4x2_mul_ck { - clock-mult = <1>; + ti,clock-mult = <1>; }; &dpll4_m5x2_mul_ck { diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index cb04d4b37e7f..df3c699a1893 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -425,10 +425,10 @@ dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,fixed-factor-clock"; clocks = <&dpll4_m4_ck>; - clock-mult = <2>; - clock-div = <1>; + ti,clock-mult = <2>; + ti,clock-div = <1>; }; dpll4_m4x2_ck: dpll4_m4x2_ck { -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html