Re: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2014-02-05 Sebastian Reichel <sre@xxxxxxxxxx>:
> Hi,
>
> On Wed, Feb 05, 2014 at 05:38:54PM +0100, Pali Rohár wrote:
>> > I assumed, that the workaround is not needed for this device type.
>>
>> That rx51 secure call must not be called on non secure devices (e.g.
>> qemu), because it cause kernel crash. So I thought that kernel should
>> write something like secure call is disabled on that device types.
>> Kernel code for errata 430973 will update ibe bit for non secure
>> devices.
>
> Do you see any advantage in having that message?
>

Consistency. Print message 1) only if secure rx51 smc instruction is
called or 2) print message always (also if smc is not called). With
that patch message is printed (enabled/disabled) only if device is
rx51 and device type is HS.

For information it is also good to know that in qemu that special
secure smc instruction was not called.

-- 
Pali Rohár
pali.rohar@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux