On Wed, 2013-01-30 at 14:18 +0530, Santosh Shilimkar wrote: > On Wednesday 30 January 2013 02:13 PM, Kumar, Anil wrote: > > Hi Sourav, > > > > On Wed, Jan 30, 2013 at 12:10:18, Poddar, Sourav wrote: > >> Hi Luciano, > >> On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote: > >>> Hi Sourav, > >>> > >>> On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: > >>>> Booting 3.8-rc4 om omap 4430sdp results in the following error > >>>> > >>>> omap_i2c 48070000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.024261] omap_i2c 48070000.i2c: bus 0 rev0.12 at 100 kHz > >>>> [ 1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz > >>>> [ 1.043762] omap_i2c 48060000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.050964] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz > >>>> [ 1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 > >>>> [ 1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz > >>>> > >>>> This happens because omap4 dts file is not adapted to use i2c through pinctrl > >>>> framework. Populating i2c pinctrl data to get rid of the error. > >>>> > >>>> Tested on omap4430 sdp with 3.8-rc4 kernel. > >>>> > >>>> Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx> > >>>> Reported-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> > >>>> --- > >>> Could you do the same thing for panda? I'm getting the same kind of > >>> errors with it: > > > > omap4 uses pinctrl-single driver for pinmux with DT. Currently > > pinctrl-single driver is getting up after I2C driver. So I2c cannot > > use pinctrl. The below patch solve this issue > > > > http://www.gossamer-threads.com/lists/linux/kernel/1669067 > > > > Can you try with this ? it may solve it. > > > OMAP i2c driver already takes care of -EPROBE_DEFER. The issue > as you see from the log is not probe failure but missing the > pin information in DT blob. And thats what patch does. Yes, Santosh is right. I tried this patch, but it didn't fix the warnings. -- Luca. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
