>>>>> "Vaibhav" == Vaibhav Bedia <vaibhav.bedia@xxxxxx> writes: Vaibhav> Since AM33XX supports only DT-boot, this is needed Vaibhav> for the appropriate device nodes to be created. Vaibhav> Note: OCMC RAM is part of the PER power domain and supports Vaibhav> retention. The assembly code for low power entry/exit will Vaibhav> run from OCMC RAM. To ensure that the OMAP PM code does not Vaibhav> attempt to disable the clock to OCMC RAM as part of the Vaibhav> suspend process add the no_idle_on_suspend flag. Vaibhav> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@xxxxxx> Vaibhav> Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> Vaibhav> --- Vaibhav> v2: Add reg property Vaibhav> arch/arm/boot/dts/am33xx.dtsi | 14 +++++++++++++ Vaibhav> 1 file changed, 14 insertions(+) Vaibhav> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi Vaibhav> index c2f14e8..423f898 100644 Vaibhav> --- a/arch/arm/boot/dts/am33xx.dtsi Vaibhav> +++ b/arch/arm/boot/dts/am33xx.dtsi Vaibhav> @@ -385,5 +385,19 @@ Vaibhav> mac-address = [ 00 00 00 00 00 00 ]; Vaibhav> }; Vaibhav> }; Vaibhav> + Vaibhav> + ocmcram: ocmcram@40300000 { Vaibhav> + compatible = "ti,ocmcram"; Vaibhav> + reg = <0x40300000 0x10000>; Vaibhav> + ti,hwmods = "ocmcram"; Vaibhav> + ti,no_idle_on_suspend; Vaibhav> + }; Vaibhav> + Vaibhav> + wkup_m3: wkup_m3@44d00000 { Vaibhav> + compatible = "ti,wkup_m3"; Both of these compatible properties should probably use less generic names, like: ti,am3352-ocmcram ti,am3352-wkup-m3 ('-' instead of '_') -- Bye, Peter Korsgaard -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html