By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/gadget/atmel_usba_udc.c | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index a7aed84..f0f9423 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1900,9 +1900,9 @@ static int __init usba_udc_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
(unsigned long)fifo->start, udc->fifo);
- device_initialize(&udc->gadget.dev);
udc->gadget.dev.parent = &pdev->dev;
udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ udc->gadget.register_my_device = true;
platform_set_drvdata(pdev, udc);
@@ -1962,12 +1962,6 @@ static int __init usba_udc_probe(struct platform_device *pdev)
}
udc->irq = irq;
- ret = device_add(&udc->gadget.dev);
- if (ret) {
- dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
- goto err_device_add;
- }
-
if (gpio_is_valid(pdata->vbus_pin)) {
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
udc->vbus_pin = pdata->vbus_pin;
@@ -2007,9 +2001,6 @@ err_add_udc:
gpio_free(udc->vbus_pin);
}
- device_unregister(&udc->gadget.dev);
-
-err_device_add:
free_irq(irq, udc);
err_request_irq:
kfree(usba_ep);
@@ -2053,8 +2044,6 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
clk_put(udc->hclk);
clk_put(udc->pclk);
- device_unregister(&udc->gadget.dev);
-
return 0;
}
--
1.8.1.rc1.5.g7e0651a
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
