ping!
It has been 1.5 month and we are at rc4 already...
On 01/02/13 09:16, Igor Grinberg wrote:
> ping
>
> Hi Tony,
>
> This is a really small addition to improve Paul's tests coverage.
> Can this go into 3.9?
>
> Thanks
>
> On 12/07/12 11:05, Igor Grinberg wrote:
>> cm-t3517 uses two MMC interfaces. Add support for both.
>>
>> Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
>> ---
>> v2: Use CONFIG_MMC_OMAP_HS instead of plain CONFIG_MMC, so it will be stubbed
>> out with the same defines as omap_hsmmc_init() function.
>> Fix the !CONFIG_MMC_OMAP_HS case.
>>
>> arch/arm/mach-omap2/board-cm-t3517.c | 27 +++++++++++++++++++++++++++
>> 1 files changed, 27 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
>> index ebbc2ad..792d684 100644
>> --- a/arch/arm/mach-omap2/board-cm-t3517.c
>> +++ b/arch/arm/mach-omap2/board-cm-t3517.c
>> @@ -32,6 +32,7 @@
>> #include <linux/mtd/mtd.h>
>> #include <linux/mtd/nand.h>
>> #include <linux/mtd/partitions.h>
>> +#include <linux/mmc/host.h>
>> #include <linux/can/platform/ti_hecc.h>
>>
>> #include <asm/mach-types.h>
>> @@ -46,6 +47,7 @@
>>
>> #include "mux.h"
>> #include "control.h"
>> +#include "hsmmc.h"
>> #include "common-board-devices.h"
>> #include "am35xx-emac.h"
>> #include "gpmc-nand.h"
>> @@ -121,6 +123,26 @@ static void cm_t3517_init_hecc(void)
>> static inline void cm_t3517_init_hecc(void) {}
>> #endif
>>
>> +#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
>> +static struct omap2_hsmmc_info cm_t3517_mmc[] = {
>> + {
>> + .mmc = 1,
>> + .caps = MMC_CAP_4_BIT_DATA,
>> + .gpio_cd = 144,
>> + .gpio_wp = 59,
>> + },
>> + {
>> + .mmc = 2,
>> + .caps = MMC_CAP_4_BIT_DATA,
>> + .gpio_cd = -EINVAL,
>> + .gpio_wp = -EINVAL,
>> + },
>> + {} /* Terminator */
>> +};
>> +#else
>> +#define cm_t3517_mmc NULL
>> +#endif
>> +
>> #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
>> #define RTC_IO_GPIO (153)
>> #define RTC_WR_GPIO (154)
>> @@ -271,6 +293,10 @@ static struct omap_board_mux board_mux[] __initdata = {
>> /* CM-T3517 USB HUB nRESET */
>> OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
>>
>> + /* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */
>> + OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
>> + OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
>> +
>> { .reg_offset = OMAP_MUX_TERMINATOR },
>> };
>> #endif
>> @@ -286,6 +312,7 @@ static void __init cm_t3517_init(void)
>> cm_t3517_init_usbh();
>> cm_t3517_init_hecc();
>> am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
>> + omap_hsmmc_init(cm_t3517_mmc);
>> }
>>
>> MACHINE_START(CM_T3517, "Compulab CM-T3517")
>
--
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
