Hi,
On Tue, Jan 29, 2013 at 10:35:05AM +0530, Mugunthan V N wrote:
> On 1/29/2013 2:14 AM, Felipe Balbi wrote:
> >On Tue, Jan 29, 2013 at 01:42:25AM +0530, Mugunthan V N wrote:
> >>adding support for VLAN interface for cpsw.
> >>
> >>CPSW VLAN Capability
> >>* Can filter VLAN packets in Hardware
> >>
> >>Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
> >>---
> >> Documentation/devicetree/bindings/net/cpsw.txt | 2 +
> >> drivers/net/ethernet/ti/cpsw.c | 108 +++++++++++++++++++++++-
> >> include/linux/platform_data/cpsw.h | 1 +
> >> 3 files changed, 110 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
> >>index 6ddd028..99696bf 100644
> >>--- a/Documentation/devicetree/bindings/net/cpsw.txt
> >>+++ b/Documentation/devicetree/bindings/net/cpsw.txt
> >>@@ -24,6 +24,8 @@ Required properties:
> >> Optional properties:
> >> - ti,hwmods : Must be "cpgmac0"
> >> - no_bd_ram : Must be 0 or 1
> >>+- default_vlan : Specifies Default VLAN for non tagged packets
> >>+ ALE processing
> >> Note: "ti,hwmods" field is used to fetch the base address and irq
> >> resources from TI, omap hwmod data base during device registration.
> >>diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> >>index b35e6a7..dee6951 100644
> >>--- a/drivers/net/ethernet/ti/cpsw.c
> >>+++ b/drivers/net/ethernet/ti/cpsw.c
> >>@@ -32,6 +32,7 @@
> >> #include <linux/of.h>
> >> #include <linux/of_net.h>
> >> #include <linux/of_device.h>
> >>+#include <linux/if_vlan.h>
> >> #include <linux/platform_data/cpsw.h>
> >>@@ -72,6 +73,11 @@ do { \
> >> dev_notice(priv->dev, format, ## __VA_ARGS__); \
> >> } while (0)
> >>+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
> >use IS_ENABLED() instead.
> Will change this in next patch version.
> >
> >>+#define VLAN_SUPPORT
> >>+#define CPSW_VLAN_AWARE_MODE
> >>+#endif
> >>+
> >> #define ALE_ALL_PORTS 0x7
> >> #define CPSW_MAJOR_VERSION(reg) (reg >> 8 & 0x7)
> >>@@ -118,6 +124,14 @@ do { \
> >> #define TX_PRIORITY_MAPPING 0x33221100
> >> #define CPDMA_TX_PRIORITY_MAP 0x76543210
> >>+#ifdef CPSW_VLAN_AWARE_MODE
> >>+#define CPSW_VLAN_AWARE BIT(1)
> >>+#define CPSW_ALE_VLAN_AWARE 1
> >>+#else
> >>+#define CPSW_VLAN_AWARE 0x0
> >>+#define CPSW_ALE_VLAN_AWARE 0
> >>+#endif
> >you should really figure out a way of doing runtime detection for this.
> >Depending on driver recompilation just to enable/disable VLAN support
> >will be quite boring.
> I am not able to find a way to know whether stack is compiled with
> VLAN support or not
> without using VLAN_SUPPORT compiler option. Only way is to hack
> cpsw_ndo_vlan_rx_add_vid
> and know whether stack has VLAN capability or not which is not advisable.
you could use a module parameter or pass data to the driver. In any
case, relying completely on compile-time choices isn't very nice.
--
balbi
Attachment:
signature.asc
Description: Digital signature
