Added dt support for dwc3 core and update the documentation with
device tree binding information. Getting a PHY is now done using
devm_usb_get_phy_by_phandle() for dt boot.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 22 ++++++++++++++++++++++
drivers/usb/dwc3/core.c | 24 ++++++++++++++++++++----
2 files changed, 42 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
new file mode 100644
index 0000000..5e68eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -0,0 +1,22 @@
+synopsys DWC3 CORE
+
+DWC3- USB3 CONTROLLER
+
+Required properties:
+ - compatible: must be "synopsys,dwc3"
+ - reg : Address and length of the register set for the device
+ - interrupts: Interrupts used by the dwc3 controller.
+ - usb_phy : array of phandle for the PHY device
+
+Optional properties:
+ - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+
+This is usually a subnode to DWC3 glue to which it is connected.
+
+dwc3@4a030000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>
+ usb_phy = <&usb2_phy>, <&usb3,phy>;
+ tx-fifo-resize;
+};
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3a4004a..c1fb6d2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -420,13 +420,19 @@ static int dwc3_probe(struct platform_device *pdev)
return -ENOMEM;
}
- dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+ if (node) {
+ dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb_phy", 0);
+ dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb_phy", 1);
+ } else {
+ dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+ dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+ }
+
if (IS_ERR_OR_NULL(dwc->usb2_phy)) {
dev_err(dev, "no usb2 phy configured\n");
return -EPROBE_DEFER;
}
- dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
if (IS_ERR_OR_NULL(dwc->usb3_phy)) {
dev_err(dev, "no usb3 phy configured\n");
return -EPROBE_DEFER;
@@ -450,8 +456,7 @@ static int dwc3_probe(struct platform_device *pdev)
else
dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
- if (of_get_property(node, "tx-fifo-resize", NULL))
- dwc->needs_fifo_resize = true;
+ dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -580,11 +585,22 @@ static int dwc3_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id of_dwc3_match[] = {
+ {
+ .compatible = "synopsys,dwc3"
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
+#endif
+
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = dwc3_remove,
.driver = {
.name = "dwc3",
+ .of_match_table = of_match_ptr(of_dwc3_match),
},
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
