Linux Man Pages
[Prev Page][Next Page]
- Re: Right margin for code (SYNOPSIS, EXAMPLES, ...), (continued)
- [RFC] cacheflush.2: Document different prototypes for different architectures,
Alejandro Colomar (man-pages)
- [PATCH v2] close_range.2: new page documenting close_range(2),
Stephen Kitt
- cacheflush.2,
Heinrich Schuchardt
- [patch] close_range.2: new page documenting close_range(2),
Stephen Kitt
- [PATCH] tcp.7: tcp_syncookies: It is now an integer [0, 2],
Alejandro Colomar
- Missing value for tcp_syncookies sysctl,
Philip Rowlands
- Linux man-pages maintainership adjustments, Michael Kerrisk (man-pages)
- [patch] futex.7: Semantics section: Race condition in locking semantics description,
Sudvarg, Marion
- [PATCH] fanotify: Document FAN_AUDIT flag,
Jan Kara
- [PATCH] sgx.7: New page with overview of Software Guard eXtensions (SGX),
Jarkko Sakkinen
- [PATCH V2] uapi: fix statx attribute value overlap for DAX & MOUNT_ROOT,
Eric Sandeen
- [PATCH 0/2] statx: Fix DAX attribute collision and handling,
Eric Sandeen
- [PATCH] futex: Change 'utime' parameter to be 'const ... *',
Alejandro Colomar
- [PATCH] subpage_prot.2: SYNOPSIS: Fix return type: s/long/int/,
Alejandro Colomar
- [PATCH] spu_create.2: Clarify that one of the prototypes is the current one,
Alejandro Colomar
- pivot_root - wrong check on mount(2),
Davide Giorgio
- UAPI value collision: STATX_ATTR_MOUNT_ROOT vs STATX_ATTR_DAX,
David Howells
- [patch] link.2: ERRORS: add ENOENT when target is deleted,
Mathias Rav
- [PATCH] fanotify.7: fix outdated description,
Amir Goldstein
- [PATCH] set_tid_address.2: SYNOPSIS: Fix set_tid_address() return type,
Alejandro Colomar
- set_thread_area.2: csky architecture undocumented,
Alejandro Colomar (man-pages)
- [PATCH] restart_syscall.2: SYNOPSIS: Fix restart_syscall() return type,
Alejandro Colomar
- [patch] getnameinfo.3: Fix _POSIX_C_SOURCE value for getaddrinfo(),
Sebastian Kirmayer
- [PATCH] utmp.5: Oxford comma,
Alejandro Colomar
- [PATCH] lseek.2: SYNOPSIS: Use correct types,
Alejandro Colomar
- [PATCH v4 0/4] add epoll_pwait2 syscall,
Willem de Bruijn
- strnlen.3: never beyond s+maxlen,
Heinrich Schuchardt
- [PATCH] capget.2, execve.2, readv.2, socketpair.2, utime.2, utimensat.2, getloadavg.3, proc.5, mount_namespaces.7, unix.7: ffix,
Alejandro Colomar
- Re: [PATCH] capget.2, execve.2, readv.2, socketpair.2, utime.2, utimensat.2, getloadavg.3, proc.5, mount_namespaces.7, unix.7: ffix, Michael Kerrisk (man-pages)
- Re: [PATCH] capget.2, execve.2, readv.2, socketpair.2, utime.2, utimensat.2, getloadavg.3, proc.5, mount_namespaces.7, unix.7: ffix, Alejandro Colomar (man-pages)
- Re: [PATCH] capget.2, execve.2, readv.2, socketpair.2, utime.2, utimensat.2, getloadavg.3, proc.5, mount_namespaces.7, unix.7: ffix, Michael Kerrisk (man-pages)
- [PATCH v2] capget.2, execve.2, readv.2, socketpair.2, utime.2, utimensat.2, getloadavg.3, proc.5, mount_namespaces.7, unix.7: ffix, Alejandro Colomar
- Re: [PATCH v2] capget.2, execve.2, readv.2, socketpair.2, utime.2, utimensat.2, getloadavg.3, proc.5, mount_namespaces.7, unix.7: ffix, Michael Kerrisk (man-pages)
- [PATCH v2 2/2] execve.2, proc.5, mount_namespaces.7, unix.7: srcfix, Alejandro Colomar
- Unneeded double quotes, Alejandro Colomar (man-pages)
- What clocks are supported by pthread_clockjoin_np(),
Michael Kerrisk (man-pages)
- [PATCH man-pages v6] Document encoded I/O,
Omar Sandoval
[PATCH v3 0/2] add epoll_pwait2 syscall,
Willem de Bruijn
[PATCH] perf_event_open.2: Update man page with recent kernel changes,
Alejandro Colomar
Re: [ TLPI ] bad longjmp example solution redundancy., Michael Kerrisk
[PATCH v2] sigaction.2: Document SA_EXPOSE_TAGBITS and the flag support detection protocol,
Peter Collingbourne
[PATCH v5] perf_event_open.2: Update man page with recent changes,
Namhyung Kim
[PATCH] Add script to get modified pages for commit msgs,
Alejandro Colomar
Re: [PATCH] locale.1, pldd.1, sprof.1, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_wait.2, exit_group.2, fallocate.2, fanotify_mark.2, fcntl.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, gethostname.2, getitimer.2, getpagesize.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getunwind.2, getxattr.2, init_module.2, inotify_init.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_tty.2, ioctl_userfaultfd.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, nfsservctl.2, open.2, open_by_handle_at.2, openat2.2, outb.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, recv.2, recvmmsg.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semget.2, semop.2, send.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, setns.2, setpgid.2, setxattr.2, shmop.2, sigaction.2, sigprocmask.2, sigwaitinfo.2, splice.2, spu_create.2, spu_run.2, stat.2, statx.2, subpage_prot.2, symlink.2, sync_file_range.2, syscall.2, sysctl.2, syslog.2, tee.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, tkill.2, umount.2, unlink.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vmsplice.2, wait4.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_init.3, aio_suspend.3, argz_add.3, asin.3, asinh.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsearch.3, bstring.3, bswap.3, btowc.3, btree.3, byteorder.3, bzero.3, cacos.3, cacosh.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, creal.3, crypt.3, csin.3, csinh.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, div.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, drand48.3, drand48_r.3, duplocale.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fenv.3, fexecve.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmemopen.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseeko.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gcvt.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdtablesize.3, getenv.3, getgrent.3, getgrent_r.3, getgrnam.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, lrint.3, lround.3, lsearch.3, makedev.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, netlink.3, newlocale.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_init.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, putwchar.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, readdir_r.3, realpath.3, recno.3, regex.3, remainder.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, siginterrupt.3, sigpause.3, sigsetops.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sqrt.3, stailq.3, stdin.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, system.3, tailq.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, tzset.3, ualarm.3, ungetwc.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wprintf.3, xdr.3, y0.3, cciss.4, dsp56k.4, fuse.4, hpsa.4, lirc.4, sd.4, sk98lin.4, st.4, acct.5, charmap.5, elf.5, repertoiremap.5, termcap.5, tzfile.5, ascii.7, bpf-helpers.7, environ.7, futex.7, glob.7, locale.7, man-pages.7, math_error.7, netlink.7, packet.7, posixoptions.7, rtld-audit.7, sigevent.7, sock_diag.7, tcp.7, udp.7, unix.7, uri.7, zdump.8, zic.8: srcfix: 's/^.nf$/.EX/; s/^.fi$/.EE/',
Michael Kerrisk (man-pages)
[RFC] memusage.1, uri.7, user-keyring.7, user-session-keyring.7, ld.so.8, tzselect.8: srcfix: Replace \f markup by .,
Alejandro Colomar
- Re: [RFC] memusage.1, uri.7, user-keyring.7, user-session-keyring.7, ld.so.8, tzselect.8: srcfix: Replace \f markup by ., Michael Kerrisk (man-pages)
- Re: [RFC] memusage.1, uri.7, user-keyring.7, user-session-keyring.7, ld.so.8, tzselect.8: srcfix: Replace \f markup by ., Alejandro Colomar (man-pages)
- Re: [RFC] memusage.1, uri.7, user-keyring.7, user-session-keyring.7, ld.so.8, tzselect.8: srcfix: Replace \f markup by ., Michael Kerrisk (man-pages)
[PATCH] getent.1, fanotify_mark.2, fcntl.2, futex.2, membarrier.2, mmap.2, mount.2, msgctl.2, readv.2, semctl.2, set_mempolicy.2, shmctl.2, syscalls.2, abs.3, bstring.3, btree.3, ctime.3, drand48.3, fgetc.3, fopen.3, gethostbyname.3, getnetent.3, getprotoent.3, getservent.3, INFINITY.3, __ppc_set_ppr_med.3, inet.3, j0.3, makecontext.3, printf.3, puts.3, resolver.3, sigsetops.3, elf.5, nscd.conf.5, proc.5, inotify.7, ipv6.7, spufs.7, system_data_types.7: Use Oxford comma,
Alejandro Colomar
- Re: [PATCH] getent.1, fanotify_mark.2, fcntl.2, futex.2, membarrier.2, mmap.2, mount.2, msgctl.2, readv.2, semctl.2, set_mempolicy.2, shmctl.2, syscalls.2, abs.3, bstring.3, btree.3, ctime.3, drand48.3, fgetc.3, fopen.3, gethostbyname.3, getnetent.3, getprotoent.3, getservent.3, INFINITY.3, __ppc_set_ppr_med.3, inet.3, j0.3, makecontext.3, printf.3, puts.3, resolver.3, sigsetops.3, elf.5, nscd.conf.5, proc.5, inotify.7, ipv6.7, spufs.7, system_data_types.7: Use Oxford comma, Michael Kerrisk (man-pages)
[PATCH] locale.5, ipv6.7: ffix,
Alejandro Colomar
[PATCH] sigaction.2: Document SA_EXPOSE_TAGBITS and the flag support detection protocol,
Peter Collingbourne
[PATCH] perf_event_open.2: srcfix,
Alejandro Colomar
Rationale for .PD 0 in old commit,
Alejandro Colomar (man-pages)
[PATCH] perf_event_open.2: Assign calculated value explicitly to 'config',
Alejandro Colomar
.RS,
Alejandro Colomar (man-pages)
- Re: .RS, G. Branden Robinson
- Re: .RS, Alejandro Colomar (man-pages)
- Re: .RS, G. Branden Robinson
- Re: .RS, Alejandro Colomar (man-pages)
- Re: .RS, Alejandro Colomar (man-pages)
- Re: .RS, Alejandro Colomar (man-pages)
- Re: .RS, Michael Kerrisk (man-pages)
- Message not available
- Re: .RS, Michael Kerrisk (man-pages)
- Re: .RS, Alejandro Colomar
- Re: .RS, Michael Kerrisk (man-pages)
- Re: .RS, G. Branden Robinson
sigaction.2: clarification for SA_NODEFER needed,
Heinrich Schuchardt
POSIX.1-2017 manual pages for Linux, Michael Kerrisk (man-pages)
Format inline code,
Alejandro Colomar
[PATCH] perf_event_open.2: Update man page with recent changes,
Namhyung Kim
[PATCH] strerror.3: tfix,
Alejandro Colomar
[PATCH] membarrier.2: Update membarrier manpage for 5.10,
Peter Oskolkov
man-pages-5.09 released, Michael Kerrisk (man-pages)
[PATCH] membarrier.2: Update prototype,
Alejandro Colomar
[PATCH] openat.2: SYNOPSIS: return long,
Alejandro Colomar
[PATCH] mq_getsetattr.2: Use 'const' when appropriate,
Alejandro Colomar
[PATCH] io_setup.2: SYNOPSIS: return long,
Alejandro Colomar
[PATCH] io_cancel.2, io_destroy.2, io_getevents.2, io_cancel.2, io_submit.2: SYNOPSIS: s/io_context_t/aio_context_t/,
Alejandro Colomar
[PATCH] futex.2: ffix,
Alejandro Colomar
[PATCH 1/2] futex.2: srcfix,
Alejandro Colomar
Re: Possible bug in getdents64()?,
Alejandro Colomar
[PATCH 0/3] Improve strtol(3) example,
Alejandro Colomar
[PATCH] clock_getres.2: EXAMPLES: Use 'const' when appropriate,
Alejandro Colomar
[PATCH] getdents.2: SYNOPSIS: Add missing header and feature test macro,
Alejandro Colomar
Re: [patch] socket.7: document SO_INCOMING_NAPI_ID,
Michael Kerrisk (man-pages)
[PATCH] getdents.2: wfix,
Alejandro Colomar
[PATCH] getdents.2: Use 'ssize_t' instead of 'int',
Alejandro Colomar
[PATCH v2] perf_event_open.2: update the man page with CAP_PERFMON related information,
Alexey Budankov
[PATCH 0/6] Add loff_t & off64_t, and update off_t,
Alejandro Colomar
[PATCH] system_data_types: ffix,
Alejandro Colomar
[PATCH 1/2] system_data_types.7: Add 'dev_t',
Alejandro Colomar
[PATCH] system_data_types.7: srcfix,
Alejandro Colomar
[PATCH v2 1/2] system_data_types.7: Add 'error_t',
Alejandro Colomar
[PATCH 1/2] system_data_types.7: Add 'error_t',
Alejandro Colomar
argz_create,
Jonny Grant
For review: seccomp_user_notif(2) manual page [v2],
Michael Kerrisk (man-pages)
Re: For review: seccomp_user_notif(2) manual page [v2], Sargun Dhillon
Re: For review: seccomp_user_notif(2) manual page [v2], Christian Brauner
[PATCH] stailq.3: SEE ALSO: Add insque(3), queue(7),
Alejandro Colomar
[PATCH 1/2] system_Data_types.7: Add 'clockid_t',
Alejandro Colomar
[PATCH 0/3] Move queue.3 to queue.7,
Alejandro Colomar
[PATCH] tailq.3: tfix,
Dmitry V. Levin
[PATCH] circleq.3, list.3, slist.3, stailq.3, tailq.3: Use the 'struct' keyword when appropriate,
Alejandro Colomar
[PATCH 1/2] queue.3: Add self to copyright notice,
Alejandro Colomar
[PATCH 00/10] tailq.3: fork from queue.3,
Alejandro Colomar
- [PATCH 01/10] tailq.3: New page that will hold the (tailq) contents of queue.3, Alejandro Colomar
- [PATCH 02/10] queue.3, tailq.3: NAME: Move code from queue.3 to tailq.3, Alejandro Colomar
- [PATCH 03/10] queue.3, tailq.3: SYNOPSIS: Move code from queue.3 to tailq.3, Alejandro Colomar
- [PATCH 04/10] queue.3, tailq.3: DESCRIPTION: Move code from queue.3 to tailq.3, Alejandro Colomar
- [PATCH 06/10] tailq.3: Copy and adapt code from queue.3, Alejandro Colomar
- [PATCH 07/10] tailq.3: ffix: Use man markup, Alejandro Colomar
- [PATCH 05/10] queue.3, tailq.3: EXAMPLES: Move code from queue.3 to tailq.3, Alejandro Colomar
- [PATCH 08/10] tailq.3: Add remaining details to complete the page, Alejandro Colomar
- [PATCH 09/10] TAILQ_CONCAT.3, TAILQ_EMPTY.3, TAILQ_ENTRY.3, TAILQ_FIRST.3, TAILQ_FOREACH.3, TAILQ_FOREACH_REVERSE.3, TAILQ_HEAD.3, TAILQ_HEAD_INITIALIZER.3, TAILQ_INIT.3, TAILQ_INSERT_AFTER.3, TAILQ_INSERT_BEFORE.3, TAILQ_INSERT_HEAD.3, TAILQ_INSERT_TAIL.3, TAILQ_LAST.3, TAILQ_NEXT.3, TAILQ_PREV.3, TAILQ_REMOVE.3, TAILQ_SWAP.3: Link to the new tailq(3) page instead of queue(3), Alejandro Colomar
- [PATCH 10/10] queue.3: SEE ALSO: Add tailq(3), Alejandro Colomar
- Re: [PATCH 00/10] tailq.3: fork from queue.3, Michael Kerrisk (man-pages)
[PATCH] circleq.3, list.3, slist.3, stailq.3: Fix return type of macros,
Alejandro Colomar
[PATCH 0/8] stailq.3,
Alejandro Colomar
- [PATCH 1/8] stailq.3: New page that will hold the (stailq) contents of queue.3, Alejandro Colomar
- [PATCH 2/8] queue.3, stailq.3: NAME: Move code from queue.3 to stailq.3, Alejandro Colomar
- [PATCH 3/8] queue.3, stailq.3: SYNOPSIS: Move code from queue.3 to stailq.3, Alejandro Colomar
- [PATCH 4/8] queue.3, stailq.3: DESCRIPTION: Move stailq specific code from queue.3 to stailq.3, Alejandro Colomar
- [PATCH 6/8] stailq.3: Copy and adapt code from queue.3, Alejandro Colomar
- [PATCH 5/8] queue.3, stailq.3: EXAMPLES: Move stailq example from queue.3 to stailq.3, Alejandro Colomar
- [PATCH 7/8] stailq.3: ffix: Use man markup, Alejandro Colomar
- [PATCH 8/8] stailq.3: Add remaining details to complete the page, Alejandro Colomar
- [PATCH 10/10] queue.3: SEE ALSO: Add stailq(3), Alejandro Colomar
- [PATCH 09/10] STAILQ_CONCAT.3, STAILQ_EMPTY.3, STAILQ_ENTRY.3, STAILQ_FIRST.3, STAILQ_FOREACH.3, STAILQ_HEAD.3, STAILQ_HEAD_INITIALIZER.3, STAILQ_INIT.3, STAILQ_INSERT_AFTER.3, STAILQ_INSERT_HEAD.3, STAILQ_INSERT_TAIL.3, STAILQ_NEXT.3, STAILQ_REMOVE.3, STAILQ_REMOVE_HEAD.3: Link to the new stailq(3) page instead of queue(3), Alejandro Colomar
- Re: [PATCH 0/8] stailq.3, Michael Kerrisk (man-pages)
[PATCH] circleq.3: ffix,
Alejandro Colomar
[PATCH 00/11] circleq.3: Fork from queue.3,
Alejandro Colomar
- [PATCH 01/11] circleq.3: New page that will hold the (circleq) content of queue.3, Alejandro Colomar
- [PATCH 02/11] circleq.3, queue.3: NAME: Move code from queue-3 to circleq.3, Alejandro Colomar
- [PATCH 03/11] circleq.3, queue.3: SYNOPSIS: Move code from queue.3 to circleq.3, Alejandro Colomar
- [PATCH 04/11] circleq.3, queue.3: DESCRIPTION: Move circleq specific code from queue.3 to circleq.3, Alejandro Colomar
- [PATCH 05/11] circleq.3, queue.3: EXAMPLES: Move circleq example program from queue.3 to circleq.3, Alejandro Colomar
- [PATCH 06/11] queue.3: ffix, Alejandro Colomar
- [PATCH 07/11] circleq.3: Copy and adapt code from queue.3, Alejandro Colomar
- [PATCH 08/11] circleq.3: ffix: Use man markup, Alejandro Colomar
- [PATCH 09/11] circleq.3: Add remaining details to complete the page, Alejandro Colomar
- [PATCH 10/11] CIRCLEQ_ENTRY.3, CIRCLEQ_HEAD.3, CIRCLEQ_INIT.3, CIRCLEQ_INSERT_AFTER.3, CIRCLEQ_INSERT_BEFORE.3, CIRCLEQ_INSERT_HEAD.3, CIRCLEQ_INSERT_TAIL.3, CIRCLEQ_REMOVE.3: Link to the new circleq(3) page instead of queue(3), Alejandro Colomar
- [PATCH 11/11] queue.3: SEE ALSO: Add circleq(3), Alejandro Colomar
- Re: [PATCH 00/11] circleq.3: Fork from queue.3, Michael Kerrisk (man-pages)
[PATCH] queue.3: Sort alphabetically,
Alejandro Colomar
[PATCH] slist.3: tfix,
Alejandro Colomar
[merged] mm-madvise-introduce-process_madvise-syscall-an-external-memory-hinting-api.patch removed from -mm tree, akpm
[merged] pid-move-pidfd_get_pid-to-pidc.patch removed from -mm tree, akpm
[merged] mm-madvise-pass-mm-to-do_madvise.patch removed from -mm tree, akpm
[PATCH] openat2.2, loop.4: tfix: s/non-zero/nonzero/,
Alejandro Colomar
[PATCH] list.3: Sort alphabetically,
Alejandro Colomar
[PATCH 00/10] slist.3: fork from queue.3,
Alejandro Colomar
- [PATCH 07/10] slist.3: ffix: Use man markup, Alejandro Colomar
- [PATCH 06/10] slist.3: Copy and adapt code from queue.3, Alejandro Colomar
- [PATCH 04/10] queue.3, slist.3: DESCRIPTION: Move slist specific code from queue.3 to slist.3, Alejandro Colomar
- [PATCH 09/10] SLIST_EMPTY.3, SLIST_ENTRY.3, SLIST_FIRST.3, SLIST_FOREACH.3, SLIST_HEAD.3, SLIST_HEAD_INITIALIZER.3, SLIST_INIT.3, SLIST_INSERT_AFTER.3, SLIST_INSERT_HEAD.3, SLIST_NEXT.3, SLIST_REMOVE.3, SLIST_REMOVE_HEAD.3: Link to the new slist(3) page instead of queue(3), Alejandro Colomar
- [PATCH 08/10] slist.3: Add details, Alejandro Colomar
- [PATCH 05/10] queue.3, slist.3: EXAMPLES: Move example program from queue.3 to slist.3, Alejandro Colomar
- [PATCH 03/10] queue.3, slist.3: SYNOPSIS: Move code from queue.3 to list.3, Alejandro Colomar
- [PATCH 01/10] slist.3: New page that will hold the (slist) contents of queue.3, Alejandro Colomar
- [PATCH 02/10] queue.3, slist.3: NAME: Move code from queue.3 to slist.3, Alejandro Colomar
- [PATCH 10/10] queue.3: SEE ALSO: Add slist(3), Alejandro Colomar
- Re: [PATCH 00/10] slist.3: fork from queue.3, Michael Kerrisk (man-pages)
[PATCH 00/22] list.3: New page forked from queue.3,
Alejandro Colomar
- [PATCH 01/22] list.3: New page that will hold the (list) contents of queue.3, Alejandro Colomar
- [PATCH 02/22] list.3, queue.3: NAME: Move code from queue.3 to list.3, Alejandro Colomar
- [PATCH 03/22] list.3: NAME: ffix: Use man markup, Alejandro Colomar
- [PATCH 04/22] list.3: NAME: Add description, Alejandro Colomar
- [PATCH 05/22] list.3, queue.3: SYNOPSIS: Move code from queue.3 to list.3, Alejandro Colomar
- [PATCH 06/22] list.3: SYNOPSIS: Copy include from queue.3, Alejandro Colomar
- [PATCH 07/22] list.3: SYNOPSIS: ffix: Use man markup, Alejandro Colomar
- [PATCH 08/22] list.3: DESCRIPTION: Add short description, Alejandro Colomar
- [PATCH 09/22] list.3: DESCRIPTION: Copy description about naming of macros from queue.3, Alejandro Colomar
- [PATCH 11/22] list.3: DESCRIPTION: ffix: Use man markup, Alejandro Colomar
- [PATCH 10/22] list.3: DESCRIPTION: Remove unrelated code to adapt to this page, Alejandro Colomar
- [PATCH 12/22] list.3, queue.3: DESCRIPTION: Move list specific code from queue.3 to list.3, Alejandro Colomar
- [PATCH 13/22] list.3: DESCRIPTION: ffix: Use man markup, Alejandro Colomar
- [PATCH 14/22] list.3: DESCRIPTION: Remove line pointing to the EXAMPLES, Alejandro Colomar
- [PATCH 15/22] list.3: CONFORMING TO: Copy from queue.3, Alejandro Colomar
- [PATCH 16/22] list.3: CONFORMING TO: Adapt to this page, Alejandro Colomar
- [PATCH 17/22] list.3: CONFORMING TO: ffix: Use man markup, Alejandro Colomar
- [PATCH 18/22] list.3: SEE ALSO: Add insque(3) and queue(3), Alejandro Colomar
- [PATCH 19/22] list.3, queue.3: EXAMPLES: Move example program from queue.3 to list.3, Alejandro Colomar
- [PATCH 21/22] list.3: BUGS: Note LIST_FOREACH() limitations, Alejandro Colomar
- [PATCH 20/22] list.3: EXAMPLES: ffix: Use man markup, Alejandro Colomar
- [PATCH 22/22] list.3: RETURN VALUE: Add details about the return value of those macros that "return" a value, Alejandro Colomar
- [PATCH v2 00/10] list.3: New page forked from queue.3, Alejandro Colomar
- [PATCH v2 01/10] list.3: New page that will hold the (list) contents of queue.3, Alejandro Colomar
- [PATCH v2 02/10] list.3, queue.3: NAME: Move code from queue.3 to list.3, Alejandro Colomar
- [PATCH v2 03/10] list.3, queue.3: SYNOPSIS: Move code from queue.3 to list.3, Alejandro Colomar
- [PATCH v2 04/10] list.3, queue.3: DESCRIPTION: Move list specific code from queue.3 to list.3, Alejandro Colomar
- [PATCH v2 05/10] list.3, queue.3: EXAMPLES: Move example program from queue.3 to list.3, Alejandro Colomar
- [PATCH v2 06/10] list.3: Copy and adapt code from queue.3, Alejandro Colomar
- [PATCH v2 07/10] list.3: ffix: Use man markup, Alejandro Colomar
- [PATCH v2 08/10] list.3: Add details, Alejandro Colomar
- [PATCH v2 09/10] LIST_EMPTY.3, LIST_ENTRY.3, LIST_FIRST.3, LIST_FOREACH.3, LIST_HEAD.3, LIST_HEAD_INITIALIZER.3, LIST_INIT.3, LIST_INSERT_AFTER.3, LIST_INSERT_BEFORE.3, LIST_INSERT_HEAD.3, LIST_NEXT.3, LIST_REMOVE.3: Link to the new list.3 page instead of queue.3, Alejandro Colomar
- [PATCH v2 10/10] queue.3: SEE ALSO: Add list(3), Alejandro Colomar
- Re: [PATCH 00/22] list.3: New page forked from queue.3, Michael Kerrisk (man-pages)
[PATCH v1 0/2] doc/admin-guide: update perf-security.rst with CAP_PERFMON usage flows,
Alexey Budankov
queue.3 overhaul,
Alejandro Colomar
[PATCH v2 2/3] system_data_types.7: Add 'clock_t',
Alejandro Colomar
[patch 26/40] mm/madvise: introduce process_madvise() syscall: an external memory hinting API, Andrew Morton
[patch 25/40] pid: move pidfd_get_pid() to pid.c, Andrew Morton
[patch 24/40] mm/madvise: pass mm to do_madvise, Andrew Morton
[PATCH 1/3] system_data_types.7: time_t: Add Versions note,
Alejandro Colomar
Manual page update for mallinfo2(), Michael Kerrisk (man-pages)
[PATCH] regex.3: Add example program,
Alejandro Colomar
[PATCH] queue.3: stailq: Complete example,
Alejandro Colomar
[PATCH 1/1] kernel_lockdown.7: describe LSM activation,
Heinrich Schuchardt
[PATCH] queue.3: list: Complete example,
Alejandro Colomar
man kernel_lockdown.7,
Heinrich Schuchardt
[PATCH] regex.3: wfix,
Alejandro Colomar
[PATCH] queue.3: circleq: Complete example,
Alejandro Colomar
[PATCH] proc.5: Document inaccurate RSS due to SPLIT_RSS_COUNTING,
Jann Horn
[PATCH] resolv.5: Document the trust-ad option,
Florian Weimer
[PATCH] queue.3: slist: Complete example,
Alejandro Colomar
[PATCH 1/2] system_data_types.7: Add 'regex_t',
Alejandro Colomar
[PATCH] regex.3: Remove unnecessary include,
Alejandro Colomar
[PATCH] queue.3: Replace incomplete example by a complete example,
Alejandro Colomar
[Index of Archives]
[Kernel Documentation]
[Linux Kernel]
[Kernel Announce]
[Kernel Newbies]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
