Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
[PATCH] iio: adc: fix a potential NULL pointer dereference,
Kangjie Lu
[PATCH] iio: max9611: fix a NULL pointer dereference,
Kangjie Lu
[PATCH v5 0/2] iio: adc: ads7950: add gpio support,
justinpopo6
[PATCH v2 0/4] iio:potentiostat:lmp91000: Adjust codestyle, and minor cleanup changes,
Anderson Reis
[PATCH v2 2/4] iio:potentiostat:lmp91000: reduce line width and remove blank line, Anderson Reis
[PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement, Anderson Reis
[PATCH v2 4/4] iio:potentiostat:lmp91000: change dev_err message, Anderson Reis
[PATCH v2] iio: proximity: as3935: fix use-after-free on device remove,
Sven Van Asbroeck
[PATCH] iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data,
Nathan Chancellor
[PATCH] iio: adc: stmpe-adc: Shuffle an if statement around in stmpe_adc_isr,
Nathan Chancellor
[PATCH 2/2] dt-bindings: iio: imu: adis16480: Document external clock,
Stefan Popa
[PATCH 1/2] iio: imu: adis16480: Add support for external clock,
Stefan Popa
[PATCH v2] iio: cros_ec: Fix the maths for gyro scale calculation,
Enric Balletbo i Serra
[PATCH v6 1/4] dt-bindings: iio/temperature: Add thermocouple types,
Patrick Havelange
[PATCH] iio: dac: mcp4725: add missing powerdown bits in store eeprom,
Jean-Francois Dagenais
[PATCH] iio: proximity: as3935: fix use-after-free on device remove,
Sven Van Asbroeck
[PATCH] drivers: iio: Kconfig: pedantic cleanup,
Enrico Weigelt, metux IT consult
[PATCH v2 0/7] FlexTimer Module Quadrature decoder counter,
Patrick Havelange
[PATCH 0/8] iio: adc: stm32-dfsdm: add buffer modes,
Fabrice Gasnier
[PATCH 0/2] iio: accel: add support for LIS2DE12,
Robert Jones
[PATCH 1/2] iio: adc: ti-ads8688: Update the module author email address,
Sean Nyekjaer
[PATCH] iio: adc: fix uninitialized variable warning,
Arnd Bergmann
[PATCH v2 0/3] Add device tree support for kxcjk1013 accelerometer,
Robert Yang
[PATCH 0/2] Add Meson SAR ADC support for G12A,
Neil Armstrong
[PATCH] mailmap: Update email for Sean Nyekjaer,
Sean Nyekjaer
[PATCH v1] iio: buffer: Switch to bitmap_zalloc(),
Andy Shevchenko
Re: [PATCH v2 3/4] mb12x2.c: add distance iio sensor with i2c (fwd), Julia Lawall
[PATCH] iio: gyro: mpu3050: fix chip ID reading,
Sergey Larin
[PATCH v2 4/4] MAINTAINERS: add maintainer for maxbotix ultrasonic driver, Andreas Klinger
[PATCH v2 3/4] mb12x2.c: add distance iio sensor with i2c,
Andreas Klinger
[PATCH v2 2/4] dt-bindings: maxbotix,i2cxl: Add MaxBotix i2c ultrasonic rangers,
Andreas Klinger
[PATCH v2 1/4] dt-bindings: Add vendor prefix for MaxBotix,
Andreas Klinger
[PATCH v2 0/4] add MaxBotix I2CXL ultrasonic iio driver, Andreas Klinger
[PATCH v2 4/4] staging: iio: ad5933: move out of staging,
Marcelo Schmitt
[PATCH v2 3/4] staging: iio: ad5933: add ABI documentation,
Marcelo Schmitt
[PATCH v2 2/4] staging: iio: ad5933: change help rule message,
Marcelo Schmitt
[PATCH v2 1/4] staging: iio: ad5933: add SPDX identifier,
Marcelo Schmitt
[PATCH v2 0/4] staging: iio: ad5933: move out of staging, Marcelo Schmitt
[PATCH v4 0/2] iio: adc: ads7950: add gpio support,
justinpopo6
[PATCH 0/3] Add device tree support for kxcjk1013 accelerometer,
Robert Yang
[PATCH v4 0/9] staging: iio: ad7780: move out of staging,
Renato Lui Geh
- [PATCH v4 1/9] staging: iio: ad7780: add gain & filter gpio support, Renato Lui Geh
- [PATCH v4 2/9] staging: iio: ad7780: add filter reading to ad778x, Renato Lui Geh
- [PATCH v4 3/9] staging: iio: ad7780: set pattern values and masks directly, Renato Lui Geh
- [PATCH v4 4/9] staging:iio:ad7780: add chip ID values and mask, Renato Lui Geh
- [PATCH v4 5/9] staging: iio: ad7780: move regulator to after GPIO init, Renato Lui Geh
- [PATCH v4 6/9] staging: iio: ad7780: add SPDX identifier, Renato Lui Geh
- [PATCH v4 7/9] staging: iio: ad7780: add new copyright holder, Renato Lui Geh
- [PATCH v4 8/9] staging: iio: ad7780: moving ad7780 out of staging, Renato Lui Geh
- [PATCH v4 9/9] staging: iio: ad7780: add device tree binding, Renato Lui Geh
- Re: [PATCH v4 0/9] staging: iio: ad7780: move out of staging, Ardelean, Alexandru
[PATCH] iio: cros_ec: Add lid angle driver,
Gwendal Grignou
[PATCH v3 0/7] iio: imu: adis16480: Add support for ADIS1649x family of devices,
Stefan Popa
[PATCH v5 1/2] iio:temperature:max31856:Add device tree bind info,
Patrick Havelange
[PATCH] docs: driver-api: iio: fix errors in documentation,
Tomasz Duszynski
[PATCH v2] iio: chemical: sps30: fix attribute kernel version,
Tomasz Duszynski
[PATCH v3 1/3] staging: iio: frequency: ad9834: Move frequency to standard iio types,
Beniamin Bia
Re: [PATCH v3 1/3] staging: iio: frequency: ad9834: Move frequency to standard iio types, Jonathan Cameron
[PATCH 0/2] iio: counter: stm32-lptimer: add PM support,
Fabrice Gasnier
[PATCH] iio: adc: ad7766: Change alignment to match paranthesis,
Camylla Gonçalves Cantanheide
[PATCH v2 1/3] iio: light: Add driver for ap3216c,
Robert Eshleman
[PATCH 4/4] MAINTAINERS: add maintainer for maxbotix ultrasonic driver, Andreas Klinger
[PATCH 3/4] mb12x2.c: add mb12x2 ultrasonic distance iio sensor,
Andreas Klinger
[PATCH 2/4] iio/proximity: add mb12x2 driver to Kconfig and Makefile,
Andreas Klinger
[PATCH 1/4] maxbotix,mb12x2.txt: add dt doc for maxbotix,mb12x2,
Andreas Klinger
[PATCH 0/4] add maxbotix ultrasonic iio driver, Andreas Klinger
[PATCH 0/4] Solve checkstyle problems,
Bárbara Fernandes
[PATCH v2 00/10] iio mount matrix - revitalize missing bindings documentation and provide code for bmc150, bmg160, bma180, itg3200, hmc584x,
H. Nikolaus Schaller
- [PATCH v2 03/10] iio: accel: bmc150: add mount matrix support, H. Nikolaus Schaller
- [PATCH v2 02/10] iio: document bindings for mounting matrices, H. Nikolaus Schaller
- [PATCH v2 05/10] iio: gyro: bmg160: add mount matrix support, H. Nikolaus Schaller
- [PATCH v2 08/10] iio: magnetometer: hmc5843: add mount matrix support, H. Nikolaus Schaller
- [PATCH v2 09/10] iio: mpu6050: improve code readability, H. Nikolaus Schaller
- [PATCH v2 10/10] iio: ak8975: improve code readability, H. Nikolaus Schaller
- [PATCH v2 01/10] iio: Allow to read mount matrix from ACPI, H. Nikolaus Schaller
- [PATCH v2 07/10] iio: magnetometer: bmc150: add mount matrix support, H. Nikolaus Schaller
- [PATCH v2 04/10] iio: accel: bma180: add mount matrix support, H. Nikolaus Schaller
- [PATCH v2 06/10] iio: gyro: itg3200: add mount matrix support, H. Nikolaus Schaller
- Re: [PATCH v2 00/10] iio mount matrix - revitalize missing bindings documentation and provide code for bmc150, bmg160, bma180, itg3200, hmc584x, Andy Shevchenko
- Re: [PATCH v2 00/10] iio mount matrix - revitalize missing bindings documentation and provide code for bmc150, bmg160, bma180, itg3200, hmc584x, Linus Walleij
[PATCH 0/2] add support for ASM330LHH,
Lorenzo Bianconi
[PATCH v2 0/5] iio: imu: adis16480: Add support for ADIS1649x family of devices,
Stefan Popa
[PATCH][next] iio: st_accel: remove redundant unsigned less than zero check,
Colin King
[PATCH] io: accel: kxcjk1013: restore the range after resume.,
He, Bo
[PATCH] iio: cros_ec_accel_legacy: Refactor code in cros_ec_accel_legacy_probe,
Gustavo A. R. Silva
[PATCH] iio:dac:ad5064 mlock cleanup - move to a local lock.,
jic23
[PATCH v2] iio: Allow to read mount matrix from ACPI,
Andy Shevchenko
[PATCH v2] iio: trigger: Print an error if there is no available irq,
Mathieu Othacehe
[PATCH v1] iio: Allow to read mount matrix from ACPI,
Andy Shevchenko
[V2 PATCH] iio: Fix scan mask selection,
Alexandru Ardelean
[PATCH] iio: cros_ec: Fix gyro scale calculation,
Enric Balletbo i Serra
[PATCH] iio: Fix scan mask selection,
Alexandru Ardelean
[PATCH 0/9] iio mount matrix - revitalize missing bindings documentation and provide code for bmc150, bmg160, bma180, itg3200, hmc584x,
H. Nikolaus Schaller
- [PATCH 8/9] iio: magnetometer: bmc150: add mount matrix support, H. Nikolaus Schaller
- [PATCH 5/9] iio: accel: bma180: convert to devm, H. Nikolaus Schaller
- [PATCH 7/9] iio: gyro: itg3200: add mount matrix support, H. Nikolaus Schaller
- [PATCH 2/9] iio: bindings: clarifications for mount-matrix bindings, H. Nikolaus Schaller
- [PATCH 4/9] iio: accel: bma180: add mount matrix support, H. Nikolaus Schaller
- [PATCH 3/9] iio: accel: bmc150: add mount matrix support, H. Nikolaus Schaller
- [PATCH 6/9] iio: gyro: bmg160: add mount matrix support, H. Nikolaus Schaller
- [PATCH 9/9] iio: magnetometer: hmc5843: add mount matrix support, H. Nikolaus Schaller
- [PATCH 1/9] iio: document bindings for mounting matrices, H. Nikolaus Schaller
- Re: [PATCH 0/9] iio mount matrix - revitalize missing bindings documentation and provide code for bmc150, bmg160, bma180, itg3200, hmc584x, Andy Shevchenko
[PATCH] staging: iio: ad7192: Fix ad7193 channel address,
Mircea Caprioru
[PATCH 0/6] iio: imu: adis16480: Add support for ADIS1649x family of devices,
Stefan Popa
[PATCH 0/5] iio:potentiostat:lmp91000: Adjust codestyle, and minor cleanup changes,
Lucas Oshiro
[PATCH 1/8] include/fsl: add common FlexTimer #defines in a separate header.,
Patrick Havelange
[PATCH] iio: remove redundant unlikely annotation,
Chengguang Xu
[PATCH -next] iio: adc: ingenic: remove redundant dev_err call in ingenic_adc_probe(),
Wei Yongjun
[PATCH 0/2] iio: chemical: pms7003: add other supported sensors,
Tomasz Duszynski
[PATCH 1/7] iio: inkern: API for reading available iio channel attribute values,
Artur Rojek
[PATCH] iio: chemical: sps30: fix attribute kernel version,
Tomasz Duszynski
[PATCH] iio/chemical/bme680: Fix SPI read interface,
Mike Looijmans
[PATCH v2 1/2] staging: iio: frequency: ad9834: Move frequency to standard iio types,
Beniamin Bia
[PATCH] iio: trigger: Print an error if there is no available irq,
Mathieu Othacehe
[PATCH] Staging: iio: meter: fixed typo,
Leonard Pollak
[PATCH v3] iio: adc: ti-ads7950: add GPIO support,
justinpopo6
[PATCH] iio: chemical: sps30: mark expected switch fall-throughs,
Gustavo A. R. Silva
[PATCH v2] iio: adc: ti-ads7950: add GPIO support,
justinpopo6
[PATCH] Staging: iio: meter: fixed iio_attr_ipeak pointing to vpeak register,
Leonard Pollak
[PULL] IIO second set of new device support, cleanups and features for the 5.1 cycle.,
Jonathan Cameron
[PATCH 0/2] ARM/dts/iio: exynos-adc: Use proper number of channels for Exynos4x12,
Krzysztof Kozlowski
bme680 gas sensor channel attributes,
David Frey
[PATCH] iio/gyro/bmg160: Use millidegrees for temperature scale,
Mike Looijmans
[PATCH] staging: iio: ad5933: move out of staging,
Marcelo Schmitt
[PATCH v1 1/1] dt-binding: iio: remove rst node from NPCM ADC document,
Tomer Maimon
[PATCH 1/3] iio: light: Add driver for ap3216c,
Robert Eshleman
[PATCH] iio:chemical:sps30 Suppress some switch fallthrough warnings.,
Jonathan Cameron
Re: [PATCH 2/2] staging: iio: frequency: ad9834: Move phase and scale to standard iio attribute, Jonathan Cameron
[PATCH v4 0/3] add support for PMS7003 PM sensor,
Tomasz Duszynski
Re: [PATCH 3/5] iio:adc:lpc32xx use SPDX-License-Identifier, Jonathan Cameron
Re: [PATCH 2/5] dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply, Jonathan Cameron
Re: [PATCH 1/5] dt-bindings: iio: adc: move lpc32xx-adc out of staging, Jonathan Cameron
[PATCH v2] iio:accel:adxl345: Change alignment to match paranthesis,
Luciana da Costa Marques
[PATCH] iio: chemical: sps30: fix a loop timeout test,
Dan Carpenter
[PATCH] iio: adc: exynos-adc: Fix NULL pointer exception on unbind,
Krzysztof Kozlowski
[PATCH] iio: adc: ti-ads7950: add GPIO support,
justinpopo6
[PATCH] iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions",
Colin King
[PATCH 1/2] staging: iio: frequency: ad9834: Move frequency to standard iio types,
Beniamin Bia
bug: i2c-INVN6500:00: unexpected HID descriptor bcdVersion (0xca9b),
Tj
[PATCH v2 0/5] iio: gyro: add fxas2100x driver,
Rui Miguel Silva
[PATCH v3 0/4] staging: iio: ad7780: move out of staging,
Renato Lui Geh
[PATCH 0/4] Add PM support to STM32 LP Timer drivers,
Fabrice Gasnier
[PATCH 0/5] iio: gyro: add fxas2100x driver,
Rui Miguel Silva
[PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612,
Ricardo Ribalda Delgado
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
