Re: [PATCH] iio: cros_ec: Remove replacing error code with -EIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 21 Jul 2019 18:40:09 +0100
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:

> On Thu, 18 Jul 2019 15:22:37 -0700
> Gwendal Grignou <gwendal@xxxxxxxxxxxx> wrote:
> 
> > Due to an API misread, error code can be different for -EIO when reading
> > a sysfs entry. Return the error reported by the cros_ec stack.
> > 
> > Check the proper error message (protocol error, not supported) is
> > reported when there is an error returned by the EC stack.
> > 
> > Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>  
> Hi Gwendal,
> 
> If you are going to send a series of small patches for a driver
> and they will inherently cause fuzz for each other, please just
> have a small series called something like "misc fixes".
> 
> I clearly applied these in a different order to you, so needed
> a bit of fixing up. I think I got it right, but please check.
> 
> Applied to the togreg branch of iio.git and pushed out as testing
> for the autobuilders to play with it.

I did mess this up it seems, but only noticed on a later series.

I just fixed it up, but one case failed to get converted.

Thanks,

Jonathan

> 
> Thanks,
> 
> Jonathan
> 
> > ---
> > 
> >  .../cros_ec_sensors/cros_ec_sensors_core.c    | 44 +++++++++++--------
> >  drivers/iio/light/cros_ec_light_prox.c        | 36 +++++++--------
> >  drivers/iio/pressure/cros_ec_baro.c           | 17 ++++---
> >  3 files changed, 51 insertions(+), 46 deletions(-)
> > 
> > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > index 130362ca421b..ed29ac22dff8 100644
> > --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > @@ -33,6 +33,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
> >  	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
> >  	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
> >  	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
> > +	int ret;
> >  
> >  	platform_set_drvdata(pdev, indio_dev);
> >  
> > @@ -60,9 +61,10 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
> >  
> >  		state->param.cmd = MOTIONSENSE_CMD_INFO;
> >  		state->param.info.sensor_num = sensor_platform->sensor_num;
> > -		if (cros_ec_motion_send_host_cmd(state, 0)) {
> > +		ret = cros_ec_motion_send_host_cmd(state, 0);
> > +		if (ret) {
> >  			dev_warn(dev, "Can not access sensor info\n");
> > -			return -EIO;
> > +			return ret;
> >  		}
> >  		state->type = state->resp->info.type;
> >  		state->loc = state->resp->info.location;
> > @@ -86,7 +88,7 @@ int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
> >  
> >  	ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
> >  	if (ret < 0)
> > -		return -EIO;
> > +		return ret;
> >  
> >  	if (ret &&
> >  	    state->resp != (struct ec_response_motion_sense *)state->msg->data)
> > @@ -396,7 +398,7 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
> >  			  struct iio_chan_spec const *chan,
> >  			  int *val, int *val2, long mask)
> >  {
> > -	int ret = IIO_VAL_INT;
> > +	int ret;
> >  
> >  	switch (mask) {
> >  	case IIO_CHAN_INFO_SAMP_FREQ:
> > @@ -404,22 +406,27 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
> >  		st->param.ec_rate.data =
> >  			EC_MOTION_SENSE_NO_VALUE;
> >  
> > -		if (cros_ec_motion_send_host_cmd(st, 0))
> > -			ret = -EIO;
> > -		else
> > -			*val = st->resp->ec_rate.ret;
> > +		ret = cros_ec_motion_send_host_cmd(st, 0);
> > +		if (ret)
> > +			break;
> > +
> > +		*val = st->resp->ec_rate.ret;
> > +		ret = IIO_VAL_INT;
> >  		break;
> >  	case IIO_CHAN_INFO_FREQUENCY:
> >  		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
> >  		st->param.sensor_odr.data =
> >  			EC_MOTION_SENSE_NO_VALUE;
> >  
> > -		if (cros_ec_motion_send_host_cmd(st, 0))
> > -			ret = -EIO;
> > -		else
> > -			*val = st->resp->sensor_odr.ret;
> > +		ret = cros_ec_motion_send_host_cmd(st, 0);
> > +		if (ret)
> > +			break;
> > +
> > +		*val = st->resp->sensor_odr.ret;
> > +		ret = IIO_VAL_INT;
> >  		break;
> >  	default:
> > +		ret = -EINVAL;
> >  		break;
> >  	}
> >  
> > @@ -431,7 +438,7 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
> >  			       struct iio_chan_spec const *chan,
> >  			       int val, int val2, long mask)
> >  {
> > -	int ret = 0;
> > +	int ret;
> >  
> >  	switch (mask) {
> >  	case IIO_CHAN_INFO_FREQUENCY:
> > @@ -441,17 +448,16 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
> >  		/* Always roundup, so caller gets at least what it asks for. */
> >  		st->param.sensor_odr.roundup = 1;
> >  
> > -		if (cros_ec_motion_send_host_cmd(st, 0))
> > -			ret = -EIO;
> > +		ret = cros_ec_motion_send_host_cmd(st, 0);
> >  		break;
> >  	case IIO_CHAN_INFO_SAMP_FREQ:
> >  		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
> >  		st->param.ec_rate.data = val;
> >  
> > -		if (cros_ec_motion_send_host_cmd(st, 0))
> > -			ret = -EIO;
> > -		else
> > -			st->curr_sampl_freq = val;
> > +		ret = cros_ec_motion_send_host_cmd(st, 0);
> > +		if (ret)
> > +			break;
> > +		st->curr_sampl_freq = val;
> >  		break;
> >  	default:
> >  		ret = -EINVAL;
> > diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> > index 308ee6ff2e22..943fa305af91 100644
> > --- a/drivers/iio/light/cros_ec_light_prox.c
> > +++ b/drivers/iio/light/cros_ec_light_prox.c
> > @@ -42,7 +42,7 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
> >  	struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
> >  	u16 data = 0;
> >  	s64 val64;
> > -	int ret = IIO_VAL_INT;
> > +	int ret;
> >  	int idx = chan->scan_index;
> >  
> >  	mutex_lock(&st->core.cmd_lock);
> > @@ -50,23 +50,22 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
> >  	switch (mask) {
> >  	case IIO_CHAN_INFO_RAW:
> >  		if (chan->type == IIO_PROXIMITY) {
> > -			if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
> > -						     (s16 *)&data) < 0) {
> > -				ret = -EIO;
> > +			ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
> > +						     (s16 *)&data);
> > +			if (ret)
> >  				break;
> > -			}
> >  			*val = data;
> > +			ret = IIO_VAL_INT;
> >  		} else {
> >  			ret = -EINVAL;
> >  		}
> >  		break;
> >  	case IIO_CHAN_INFO_PROCESSED:
> >  		if (chan->type == IIO_LIGHT) {
> > -			if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
> > -						     (s16 *)&data) < 0) {
> > -				ret = -EIO;
> > +			ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
> > +						     (s16 *)&data);
> > +			if (ret)
> >  				break;
> > -			}
> >  			/*
> >  			 * The data coming from the light sensor is
> >  			 * pre-processed and represents the ambient light
> > @@ -82,15 +81,15 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
> >  		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
> >  		st->core.param.sensor_offset.flags = 0;
> >  
> > -		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
> > -			ret = -EIO;
> > +		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> > +		if (ret)
> >  			break;
> > -		}
> >  
> >  		/* Save values */
> >  		st->core.calib[0] = st->core.resp->sensor_offset.offset[0];
> >  
> >  		*val = st->core.calib[idx];
> > +		ret = IIO_VAL_INT;
> >  		break;
> >  	case IIO_CHAN_INFO_CALIBSCALE:
> >  		/*
> > @@ -101,10 +100,9 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
> >  		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
> >  		st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
> >  
> > -		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
> > -			ret = -EIO;
> > +		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> > +		if (ret)
> >  			break;
> > -		}
> >  
> >  		val64 = st->core.resp->sensor_range.ret;
> >  		*val = val64 >> 16;
> > @@ -127,7 +125,7 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
> >  			       int val, int val2, long mask)
> >  {
> >  	struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
> > -	int ret = 0;
> > +	int ret;
> >  	int idx = chan->scan_index;
> >  
> >  	mutex_lock(&st->core.cmd_lock);
> > @@ -141,14 +139,12 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
> >  		st->core.param.sensor_offset.offset[0] = st->core.calib[0];
> >  		st->core.param.sensor_offset.temp =
> >  					EC_MOTION_SENSE_INVALID_CALIB_TEMP;
> > -		if (cros_ec_motion_send_host_cmd(&st->core, 0))
> > -			ret = -EIO;
> > +		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> >  		break;
> >  	case IIO_CHAN_INFO_CALIBSCALE:
> >  		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
> >  		st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
> > -		if (cros_ec_motion_send_host_cmd(&st->core, 0))
> > -			ret = -EIO;
> > +		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> >  		break;
> >  	default:
> >  		ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
> > diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
> > index 034ce98d6e97..a648582b14a7 100644
> > --- a/drivers/iio/pressure/cros_ec_baro.c
> > +++ b/drivers/iio/pressure/cros_ec_baro.c
> > @@ -39,26 +39,29 @@ static int cros_ec_baro_read(struct iio_dev *indio_dev,
> >  {
> >  	struct cros_ec_baro_state *st = iio_priv(indio_dev);
> >  	u16 data = 0;
> > -	int ret = IIO_VAL_INT;
> > +	int ret;
> >  	int idx = chan->scan_index;
> >  
> >  	mutex_lock(&st->core.cmd_lock);
> >  
> >  	switch (mask) {
> >  	case IIO_CHAN_INFO_RAW:
> > -		if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
> > -					     (s16 *)&data) < 0)
> > -			ret = -EIO;
> > +		ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
> > +					     (s16 *)&data);
> > +		if (ret)
> > +			break;
> > +
> >  		*val = data;
> > +		ret = IIO_VAL_INT;
> >  		break;
> >  	case IIO_CHAN_INFO_SCALE:
> >  		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
> >  		st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
> >  
> > -		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
> > -			ret = -EIO;
> > +		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> > +		if (ret)
> >  			break;
> > -		}
> > +
> >  		*val = st->core.resp->sensor_range.ret;
> >  
> >  		/* scale * in_pressure_raw --> kPa */  
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux