Linux Kernel I²C Bus Layer

• Date Index

• [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, Christian Fetzer
  • [PATCH v5 1/3] i2c-piix4: Convert piix4_main_adapter to array, Christian Fetzer
  • [PATCH v5 2/3] i2c-piix4: Add support for multiplexed main adapter in SB800, Christian Fetzer
  • [PATCH v5 3/3] i2c-piix4: Add adapter port name support for SB800 chipset, Christian Fetzer
    • Re: [PATCH v5 3/3] i2c-piix4: Add adapter port name support for SB800 chipset, Jean Delvare
  • Re: [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, Wolfram Sang
  • Re: [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, Jean Delvare
    • Re: [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, fetzerch
      • Re: [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, Jean Delvare
        • Re: [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, Rudolf Marek
      • Re: [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, Jean Delvare
        • Re: [PATCH v5 0/3] Support multiplexed main SMBus interface on SB800, Christian Fetzer
• [PATCH v3 1/1] i2c: core: replace boolean variable by integer, Andy Shevchenko
  • Re: [PATCH v3 1/1] i2c: core: replace boolean variable by integer, Andy Shevchenko
    • Re: [PATCH v3 1/1] i2c: core: replace boolean variable by integer, Wolfram Sang
  • Re: [PATCH v3 1/1] i2c: core: replace boolean variable by integer, Uwe Kleine-König
• [PATCH v3 00/11] i2c: rcar: tackle race conditions in the driver, Wolfram Sang
  • [PATCH v3 01/11] i2c: rcar: make sure clocks are on when doing clock calculation, Wolfram Sang
  • [PATCH v3 03/11] i2c: rcar: remove unused IOERROR state, Wolfram Sang
  • [PATCH v3 02/11] i2c: rcar: rework hw init, Wolfram Sang
  • [PATCH v3 05/11] i2c: rcar: refactor setup of a msg, Wolfram Sang
  • [PATCH v3 06/11] i2c: rcar: init new messages in irq, Wolfram Sang
  • [PATCH v3 07/11] i2c: rcar: don't issue stop when HW does it automatically, Wolfram Sang
  • [PATCH v3 09/11] i2c: rcar: revoke START request early, Wolfram Sang
    • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Sergei Shtylyov
      • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Wolfram Sang
        • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Sergei Shtylyov
          • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Wolfram Sang
            • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Sergei Shtylyov
              • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Wolfram Sang
                • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Sergei Shtylyov
                  • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Wolfram Sang
                    • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Sergei Shtylyov
                      • Re: [PATCH v3 09/11] i2c: rcar: revoke START request early, Wolfram Sang
  • [PATCH v3 10/11] i2c: rcar: clean up after refactoring, Wolfram Sang
  • [PATCH v3 11/11] i2c: rcar: handle difference in setting up non-first message, Wolfram Sang
  • [PATCH v3 08/11] i2c: rcar: check master irqs before slave irqs, Wolfram Sang
  • [PATCH v3 04/11] i2c: rcar: remove spinlock, Wolfram Sang
  • Re: [PATCH v3 00/11] i2c: rcar: tackle race conditions in the driver, Laurent Pinchart
  • Re: [PATCH v3 00/11] i2c: rcar: tackle race conditions in the driver, Wolfram Sang
• [PATCH] i2c: davinci: Increase module clock frequency, Alexander Sverdlin
  • Re: [PATCH] i2c: davinci: Increase module clock frequency, santosh shilimkar
  • Re: [PATCH] i2c: davinci: Increase module clock frequency, Wolfram Sang
    • Re: [PATCH] i2c: davinci: Increase module clock frequency, Alexander Sverdlin
      • Re: [PATCH] i2c: davinci: Increase module clock frequency, Wolfram Sang
        • [PATCH v2] i2c: davinci: Increase module clock frequency, Alexander Sverdlin
          • Re: [PATCH v2] i2c: davinci: Increase module clock frequency, Wolfram Sang
          • Re: [PATCH v2] i2c: davinci: Increase module clock frequency, Wolfram Sang
• [PATCH v3 0/5] i2c: img-scb: enchancements to support i2c on pistachio, Sifan Naeem
  • [PATCH v3 1/5] i2c: img-scb: support I2C_M_IGNORE_NAK, Sifan Naeem
  • [PATCH v3 3/5] i2c: img-scb: add handle for stop detected interrupt, Sifan Naeem
  • [PATCH v3 5/5] i2c: img-scb: support repeated starts on IP v3.3, Sifan Naeem
  • [PATCH v3 4/5] i2c: img-scb: add handle for Master halt interrupt, Sifan Naeem
  • [PATCH v3 2/5] i2c: img-scb: remove fifo EMPTYING interrupts handle, Sifan Naeem
  • Re: [PATCH v3 0/5] i2c: img-scb: enchancements to support i2c on pistachio, Wolfram Sang
• [PATCH v3 0/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, LABBE Corentin
  • [PATCH v3 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, LABBE Corentin
    • Re: [PATCH v3 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, Andy Shevchenko
      • Re: [PATCH v3 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, Jean Delvare
    • Re: [PATCH v3 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, Jean Delvare
• [PATCH v2 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, LABBE Corentin
  • Re: [PATCH v2 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, Jean Delvare
    • Re: [PATCH v2 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8, LABBE Corentin
• [PATCH] i2c: imx: make bus recovery through pinctrl optional, Li Yang
  • Re: [PATCH] i2c: imx: make bus recovery through pinctrl optional, Uwe Kleine-König
    • Re: [PATCH] i2c: imx: make bus recovery through pinctrl optional, Li Yang
      • Re: [PATCH] i2c: imx: make bus recovery through pinctrl optional, Uwe Kleine-König
        • Re: [PATCH] i2c: imx: make bus recovery through pinctrl optional, Li Yang
• [PATCH] i2c: imx: fix build issue for platforms without pinctrl, Li Yang
  • Re: [PATCH] i2c: imx: fix build issue for platforms without pinctrl, Li Yang
• [PATCH V5 0/6] i2c: qup: Add support for v2 tags and bam dma, Sricharan R
  • [PATCH V5 6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node, Sricharan R
    • Re: [V5,6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node, Andy Gross
  • [PATCH V5 5/6] dts: msm8974: Add blsp2_bam dma node, Sricharan R
    • Re: [V5,5/6] dts: msm8974: Add blsp2_bam dma node, Andy Gross
  • [PATCH V5 4/6] i2c: qup: Add bam dma capabilities, Sricharan R
    • Re: [V5,4/6] i2c: qup: Add bam dma capabilities, Andy Gross
  • [PATCH V5 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit, Sricharan R
    • Re: [V5, 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit, Andy Gross
  • [PATCH V5 2/6] i2c: qup: Add V2 tags support, Sricharan R
  • [PATCH V5 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts, Sricharan R
    • Re: [V5, 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts, Andy Gross
• [PATCHv8 1/5] i2c: imx: fix a compiling error, Zhiqiang Hou
  • [PATCHv8 2/5] watchdog: Add support for Freescale Layerscape platforms, Zhiqiang Hou
  • [PATCHv8 3/5] Documentation: DT: Add entry for Freescale LS1043a-RDB board, Zhiqiang Hou
  • [PATCHv8 4/5] ARM64: dts: add Freescale LS1043a SoC support, Zhiqiang Hou
  • [PATCHv8 5/5] ARM64: dts: add LS1043a-RDB board support, Zhiqiang Hou
  • Re: [PATCHv8 1/5] i2c: imx: fix a compiling error, Wolfram Sang
• [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
  • [RESEND PATCH v2 8/9] eeprom: at24: remove a reduntant if, Bartosz Golaszewski
  • [RESEND PATCH v2 9/9] eeprom: at24: readability tweaks, Bartosz Golaszewski
  • [RESEND PATCH v2 7/9] eeprom: at24: add the at24cs series to the list of supported devices, Bartosz Golaszewski
  • [RESEND PATCH v2 1/9] eeprom: at24: platform_data: use BIT() macro, Bartosz Golaszewski
  • [RESEND PATCH v2 5/9] eeprom: at24: export the serial number through sysfs, Bartosz Golaszewski
  • [RESEND PATCH v2 6/9] eeprom: at24: improve the device_id table readability, Bartosz Golaszewski
  • [RESEND PATCH v2 4/9] eeprom: at24: support reading of the serial number, Bartosz Golaszewski
  • [RESEND PATCH v2 2/9] eeprom: at24: new flag in platform_data, Bartosz Golaszewski
  • [RESEND PATCH v2 3/9] eeprom: at24: tie up an additional address for at24cs series, Bartosz Golaszewski
  • <Possible follow-ups>
  • [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
    • [RESEND PATCH v2 8/9] eeprom: at24: remove a reduntant if, Bartosz Golaszewski
    • [RESEND PATCH v2 9/9] eeprom: at24: readability tweaks, Bartosz Golaszewski
    • [RESEND PATCH v2 7/9] eeprom: at24: add the at24cs series to the list of supported devices, Bartosz Golaszewski
    • [RESEND PATCH v2 5/9] eeprom: at24: export the serial number through sysfs, Bartosz Golaszewski
    • [RESEND PATCH v2 6/9] eeprom: at24: improve the device_id table readability, Bartosz Golaszewski
    • [RESEND PATCH v2 1/9] eeprom: at24: platform_data: use BIT() macro, Bartosz Golaszewski
    • [RESEND PATCH v2 3/9] eeprom: at24: tie up an additional address for at24cs series, Bartosz Golaszewski
    • [RESEND PATCH v2 2/9] eeprom: at24: new flag in platform_data, Bartosz Golaszewski
    • [RESEND PATCH v2 4/9] eeprom: at24: support reading of the serial number, Bartosz Golaszewski
  • [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
    • [RESEND PATCH v2 5/9] eeprom: at24: export the serial number through sysfs, Bartosz Golaszewski
    • [RESEND PATCH v2 6/9] eeprom: at24: improve the device_id table readability, Bartosz Golaszewski
    • [RESEND PATCH v2 7/9] eeprom: at24: add the at24cs series to the list of supported devices, Bartosz Golaszewski
    • [RESEND PATCH v2 8/9] eeprom: at24: remove a reduntant if, Bartosz Golaszewski
    • [RESEND PATCH v2 9/9] eeprom: at24: readability tweaks, Bartosz Golaszewski
    • [RESEND PATCH v2 3/9] eeprom: at24: tie up an additional address for at24cs series, Bartosz Golaszewski
    • [RESEND PATCH v2 4/9] eeprom: at24: support reading of the serial number, Bartosz Golaszewski
    • [RESEND PATCH v2 2/9] eeprom: at24: new flag in platform_data, Bartosz Golaszewski
    • [RESEND PATCH v2 1/9] eeprom: at24: platform_data: use BIT() macro, Bartosz Golaszewski
    • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Wolfram Sang
      • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
        • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
        • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Wolfram Sang
          • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
            • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Wolfram Sang
              • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
                • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Wolfram Sang
                  • Re: [RESEND PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
• [PATCH v6] at24: Support SMBus read/write of 16-bit devices, Aaron Sierra
  • Re: [PATCH v6] at24: Support SMBus read/write of 16-bit devices, Jean Delvare
  • Re: [PATCH v6] at24: Support SMBus read/write of 16-bit devices, Wolfram Sang
    • Re: [PATCH v6] at24: Support SMBus read/write of 16-bit devices, Aaron Sierra
      • Re: [PATCH v6] at24: Support SMBus read/write of 16-bit devices, Jean Delvare
• [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Lars-Peter Clausen
  • [PATCH 3/3] i2c: xiic: Replace spinlock with mutex, Lars-Peter Clausen
    • Re: [PATCH 3/3] i2c: xiic: Replace spinlock with mutex, Shubhrajyoti Datta
      • Re: [PATCH 3/3] i2c: xiic: Replace spinlock with mutex, Shubhrajyoti Datta
  • [PATCH 2/3] i2c: xiic: Prevent concurrent running of the IRQ handler and __xiic_start_xfer(), Lars-Peter Clausen
    • Re: [PATCH 2/3] i2c: xiic: Prevent concurrent running of the IRQ handler and __xiic_start_xfer(), Shubhrajyoti Datta
    • Re: [PATCH 2/3] i2c: xiic: Prevent concurrent running of the IRQ handler and __xiic_start_xfer(), Wolfram Sang
  • Re: [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Shubhrajyoti Datta
    • Re: [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Shubhrajyoti Datta
    • Re: [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Lars-Peter Clausen
      • Re: [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Shubhrajyoti Datta
        • Re: [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Lars-Peter Clausen
          • Re: [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Shubhrajyoti Datta
            • Re: [PATCH 1/3] i2c: Revert "i2c: xiic: Do not reset controller before every transfer", Wolfram Sang
• [PATCH v4 0/3] Support multiplexed main SMBus interface on SB800, Christian Fetzer
  • [PATCH v4 1/3] i2c-piix4: Convert piix4_main_adapter to array, Christian Fetzer
  • [PATCH v4 2/3] i2c-piix4: Add support for multiplexed main adapter in SB800, Christian Fetzer
    • Re: [PATCH v4 2/3] i2c-piix4: Add support for multiplexed main adapter in SB800, Andy Shevchenko
    • Re: [PATCH v4 2/3] i2c-piix4: Add support for multiplexed main adapter in SB800, Mika Westerberg
  • [PATCH v4 3/3] i2c-piix4: Add adapter port name support for SB800 chipset, Christian Fetzer
  • Re: [PATCH v4 0/3] Support multiplexed main SMBus interface on SB800, Andy Shevchenko
• [PATCH] i2c: rcar: handle difference in setting up non-first message, Wolfram Sang
• [PATCH v2 10/10] i2c: rcar: clean up after refactoring, Wolfram Sang
• [PATCH v2 07/10] i2c: rcar: don't issue stop when HW does it automatically, Wolfram Sang
  • [PATCH v2 08/10] i2c: rcar: check master irqs before slave irqs, Wolfram Sang
  • [PATCH v2 09/10] i2c: rcar: revoke START request early, Wolfram Sang
• [PATCH v2 00/10] i2c: rcar: tackle race conditions in the driver, Wolfram Sang
  • [PATCH v2 01/10] i2c: rcar: make sure clocks are on when doing clock calculation, Wolfram Sang
    • Re: [PATCH v2 01/10] i2c: rcar: make sure clocks are on when doing clock calculation, Sergei Shtylyov
  • [PATCH v2 02/10] i2c: rcar: rework hw init, Wolfram Sang
  • [PATCH v2 04/10] i2c: rcar: remove spinlock, Wolfram Sang
    • Re: [PATCH v2 04/10] i2c: rcar: remove spinlock, Sergei Shtylyov
      • Re: [PATCH v2 04/10] i2c: rcar: remove spinlock, Wolfram Sang
  • [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Wolfram Sang
    • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Laurent Pinchart
      • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Wolfram Sang
        • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Laurent Pinchart
          • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Wolfram Sang
        • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Magnus Damm
          • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Laurent Pinchart
          • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Wolfram Sang
            • Re: [PATCH v2 05/10] i2c: rcar: refactor setup of a msg, Magnus Damm
  • [PATCH v2 06/10] i2c: rcar: init new messages in irq, Wolfram Sang
  • [PATCH v2 03/10] i2c: rcar: remove unused IOERROR state, Wolfram Sang
  • Re: [PATCH v2 00/10] i2c: rcar: tackle race conditions in the driver, Kuninori Morimoto
• [PATCH] i2c: core: fix wakeup irq parsing, Grygorii Strashko
  • Re: [PATCH] i2c: core: fix wakeup irq parsing, Dmitry Torokhov
  • Re: [PATCH] i2c: core: fix wakeup irq parsing, Wolfram Sang
• [PATCH] i2c: tegra: fix a possible NULL dereference, LABBE Corentin
  • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Thierry Reding
    • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, LABBE Corentin
      • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Thierry Reding
        • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Uwe Kleine-König
          • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Thierry Reding
            • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, LABBE Corentin
              • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Thierry Reding
              • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Wolfram Sang
          • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Wolfram Sang
    • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Jon Hunter
      • Re: [PATCH] i2c: tegra: fix a possible NULL dereference, Thierry Reding
• [PATCH] i2c: rcar: fix a possible NULL dereference, LABBE Corentin
  • Re: [PATCH] i2c: rcar: fix a possible NULL dereference, Uwe Kleine-König
    • Re: [PATCH] i2c: rcar: fix a possible NULL dereference, Wolfram Sang
      • Re: [PATCH] i2c: rcar: fix a possible NULL dereference, Uwe Kleine-König
        • Re: [PATCH] i2c: rcar: fix a possible NULL dereference, Wolfram Sang
          • Re: [PATCH] i2c: rcar: fix a possible NULL dereference, Uwe Kleine-König
            • Re: [PATCH] i2c: rcar: fix a possible NULL dereference, Wolfram Sang
• i2c devices and regulators, Phil Reid
• [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Andy Shevchenko
  • Re: [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Andy Shevchenko
  • Re: [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Wolfram Sang
  • Re: [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Thomas Gleixner
    • Re: [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Andy Shevchenko
      • Re: [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Thomas Gleixner
        • Re: [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Rafael J. Wysocki
      • RE: [PATCH v2 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Ong, Boon Leong
• [PATCH v1 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, Andy Shevchenko
  • Re: [PATCH v1 1/1] x86/platform/iosf_mbi: Remove duplicate definitions, kbuild test robot
• [PATCH v5] at24: Support SMBus read/write of 16-bit devices, Aaron Sierra
  • Re: [PATCH v5] at24: Support SMBus read/write of 16-bit devices, Jean Delvare
• i2c slave support für i.mx6, Michael Bachmeier
  • Re: i2c slave support für i.mx6, Wolfram Sang
    • Re: i2c slave support für i.mx6, Michael Bachmeier
      • Re: i2c slave support für i.mx6, Wolfram Sang
        • Re: i2c slave support für i.mx6, Michael Bachmeier
          • Re: i2c slave support für i.mx6, Wolfram Sang
• [PATCH v4] at24: Support SMBus read/write of 16-bit devices, Aaron Sierra
  • Re: [PATCH v4] at24: Support SMBus read/write of 16-bit devices, Jean Delvare
    • Re: [PATCH v4] at24: Support SMBus read/write of 16-bit devices, Aaron Sierra
• [PATCH] power: bq27xxx_battery: Add I2C module check dependency in Kconfig, Andrew F. Davis
  • Re: [PATCH] power: bq27xxx_battery: Add I2C module check dependency in Kconfig, Arnd Bergmann
  • Re: [PATCH] power: bq27xxx_battery: Add I2C module check dependency in Kconfig, Sebastian Reichel
• designware platdrv and runtime pm?, Wolfram Sang
  • Re: designware platdrv and runtime pm?, Jarkko Nikula
• [PULL REQUEST] i2c for 4.4, Wolfram Sang
  • <Possible follow-ups>
  • [PULL REQUEST] i2c for 4.4, Wolfram Sang
  • [PULL REQUEST] i2c for 4.4, Wolfram Sang
• [PATCH] power: bq27xxx_battery: Revert "Remove unneeded dependency in Kconfig", Arnd Bergmann
  • Re: [PATCH] power: bq27xxx_battery: Revert "Remove unneeded dependency in Kconfig", Andrew F. Davis
    • Re: [PATCH] power: bq27xxx_battery: Revert "Remove unneeded dependency in Kconfig", Arnd Bergmann
      • Re: [PATCH] power: bq27xxx_battery: Revert "Remove unneeded dependency in Kconfig", Andrew F. Davis
• [PATCH v3 0/5] Support multiplexed main SMBus interface on SB800, Christian Fetzer
  • [PATCH v3 1/5] i2c-piix4: Optionally release smba in piix4_adap_remove, Christian Fetzer
    • Re: [PATCH v3 1/5] i2c-piix4: Optionally release smba in piix4_adap_remove, Mika Westerberg
  • [PATCH v3 2/5] i2c-piix4: Convert piix4_main_adapter to array, Christian Fetzer
  • [PATCH v3 3/5] i2c-piix4: Request base address index region once for SB800, Christian Fetzer
    • Re: [PATCH v3 3/5] i2c-piix4: Request base address index region once for SB800, Andy Shevchenko
  • [PATCH v3 5/5] i2c-piix4: Add adapter port name support for SB800 chipset, Christian Fetzer
  • [PATCH v3 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800, Christian Fetzer
    • Re: [PATCH v3 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800, Andy Shevchenko
      • Re: [PATCH v3 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800, Jean Delvare
        • Re: [PATCH v3 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800, Andy Shevchenko
• [PATCH V3] Intel Lewisburg device IDs for SMBus, Alexandra Yates
  • Re: [PATCH V3] Intel Lewisburg device IDs for SMBus, Jean Delvare
  • Re: [PATCH V3] Intel Lewisburg device IDs for SMBus, Wolfram Sang
    • Re: [PATCH V3] Intel Lewisburg device IDs for SMBus, Alexandra Yates
• [PATCH] i2c: taos-evm: replace simple_strtoul by kstrtou8, LABBE Corentin
  • Re: [PATCH] i2c: taos-evm: replace simple_strtoul by kstrtou8, Jean Delvare
  • <Possible follow-ups>
  • [PATCH] i2c: taos-evm: replace simple_strtoul by kstrtou8, LABBE Corentin
    • Re: [PATCH] i2c: taos-evm: replace simple_strtoul by kstrtou8, Uwe Kleine-König
      • Re: [PATCH] i2c: taos-evm: replace simple_strtoul by kstrtou8, LABBE Corentin
• [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Xiangliang Yu
  • Re: [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Mika Westerberg
    • RE: [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Yu, Xiangliang
      • Re: [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Mika Westerberg
        • RE: [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Yu, Xiangliang
          • Re: [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Wolfram Sang
      • Re: [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Jarkko Nikula
        • RE: [PATCH 1/1] I2C: designware: fix IO timeout issue for AMD controller, Yu, Xiangliang
• [PATCH V2] Intel Lewisburg device IDs for SMBus, Alexandra Yates
  • Re: [PATCH V2] Intel Lewisburg device IDs for SMBus, Jean Delvare
    • Re: [PATCH V2] Intel Lewisburg device IDs for SMBus, Alexandra Yates
• [PATCH v3] at24: Support SMBus read/write of 16-bit devices, Aaron Sierra
  • Re: [PATCH v3] at24: Support SMBus read/write of 16-bit devices, Jean Delvare
• [PATCH] Intel LBG device IDs for SMBus, Alexandra Yates
  • Re: [PATCH] Intel LBG device IDs for SMBus, Jean Delvare
    • Re: [PATCH] Intel LBG device IDs for SMBus, Alexandra Yates
• [PATCH] platform/chrome: Fix i2c-designware adapter name, Jarkko Nikula
  • Re: [PATCH] platform/chrome: Fix i2c-designware adapter name, Jeremiah Mahler
    • Re: [PATCH] platform/chrome: Fix i2c-designware adapter name, Olof Johansson
• [Patch V1] i2c: imx: improve code readability, Gao Pan
  • Re: [Patch V1] i2c: imx: improve code readability, Uwe Kleine-König
  • Re: [Patch V1] i2c: imx: improve code readability, Wolfram Sang
• Double commits in i2c/for-next branch?, Masahiro Yamada
  • Re: Double commits in i2c/for-next branch?, Wolfram Sang
    • Re: Double commits in i2c/for-next branch?, Masahiro Yamada
• [PATCH 1/3] i2c: xlr: add support for Sigma Designs controller variant, Mans Rullgard
  • [PATCH 2/3] i2c: xlr: fix extra read/write at end of rx transfer, Mans Rullgard
    • Re: [PATCH 2/3] i2c: xlr: fix extra read/write at end of rx transfer, Wolfram Sang
      • Re: [PATCH 2/3] i2c: xlr: fix extra read/write at end of rx transfer, Måns Rullgård
  • [PATCH 3/3] i2c: xlr: add interrupt support for Sigma Designs chips, Mans Rullgard
    • Re: [PATCH 3/3] i2c: xlr: add interrupt support for Sigma Designs chips, Wolfram Sang
  • Re: [PATCH 1/3] i2c: xlr: add support for Sigma Designs controller variant, Måns Rullgård
  • Re: [PATCH 1/3] i2c: xlr: add support for Sigma Designs controller variant, Wolfram Sang
• [PATCH v2 0/5] Support multiplexed main SMBus interface on SB80, Christian Fetzer
  • [PATCH v2 1/5] i2c-piix4: Optionally release smba in piix4_adap_remove, Christian Fetzer
    • Re: [PATCH v2 1/5] i2c-piix4: Optionally release smba in piix4_adap_remove, Mika Westerberg
  • [PATCH v2 2/5] i2c-piix4: Convert piix4_main_adapter to array, Christian Fetzer
    • Re: [PATCH v2 2/5] i2c-piix4: Convert piix4_main_adapter to array, Mika Westerberg
    • Re: [PATCH v2 2/5] i2c-piix4: Convert piix4_main_adapter to array, Andy Shevchenko
  • [PATCH v2 3/5] i2c-piix4: Request base address index region once for SB800, Christian Fetzer
    • Re: [PATCH v2 3/5] i2c-piix4: Request base address index region once for SB800, Mika Westerberg
    • Re: [PATCH v2 3/5] i2c-piix4: Request base address index region once for SB800, Andy Shevchenko
  • [PATCH v2 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800, Christian Fetzer
    • Re: [PATCH v2 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800, Mika Westerberg
    • Re: [PATCH v2 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800, Andy Shevchenko
  • [PATCH v2 5/5] i2c-piix4: Add adapter port name support for SB800 chipset, Christian Fetzer
    • Re: [PATCH v2 5/5] i2c-piix4: Add adapter port name support for SB800 chipset, Mika Westerberg
    • Re: [PATCH v2 5/5] i2c-piix4: Add adapter port name support for SB800 chipset, Andy Shevchenko
• [PATCH 1/2] i2c: imx: Improve message log when DMA is not used, Fabio Estevam
  • [PATCH 2/2] i2c: imx: Remove unneeded comments, Fabio Estevam
    • Re: [PATCH 2/2] i2c: imx: Remove unneeded comments, Wolfram Sang
  • Re: [PATCH 1/2] i2c: imx: Improve message log when DMA is not used, Wolfram Sang
• [PATCH 1/2] devicetree: i2c: add binding for Sigma Designs SMP8642 I2C master, Mans Rullgard
  • [PATCH 2/2] i2c: add driver for Sigma Designs SMP8642 I2C master, Mans Rullgard
    • Re: [PATCH 2/2] i2c: add driver for Sigma Designs SMP8642 I2C master, Wolfram Sang
      • Re: [PATCH 2/2] i2c: add driver for Sigma Designs SMP8642 I2C master, Måns Rullgård
        • Re: [PATCH 2/2] i2c: add driver for Sigma Designs SMP8642 I2C master, Wolfram Sang
  • Re: [PATCH 1/2] devicetree: i2c: add binding for Sigma Designs SMP8642 I2C master, Rob Herring
• [PATCH] i2c: exynos5: register driver early in subsys initcall to avoid probe defer, Marek Szyprowski
  • Re: [PATCH] i2c: exynos5: register driver early in subsys initcall to avoid probe defer, Wolfram Sang
    • Re: [PATCH] i2c: exynos5: register driver early in subsys initcall to avoid probe defer, Marek Szyprowski
      • Re: [PATCH] i2c: exynos5: register driver early in subsys initcall to avoid probe defer, Wolfram Sang
• [PATCH] i2c: rcar: Revert the latest refactoring series, Wolfram Sang
  • Re: [PATCH] i2c: rcar: Revert the latest refactoring series, Wolfram Sang
  • Re: [PATCH] i2c: rcar: Revert the latest refactoring series, Geert Uytterhoeven
• [PATCH] i2c: designware: Don't mask TX_EMPTY if write is in progress, Jisheng Zhang
  • Re: [PATCH] i2c: designware: Don't mask TX_EMPTY if write is in progress, Jarkko Nikula
    • Re: [PATCH] i2c: designware: Don't mask TX_EMPTY if write is in progress, Jisheng Zhang
• [PATCH v2] i2c: rcar: make sure clocks are on when doing hw init, Wolfram Sang
  • Re: [PATCH v2] i2c: rcar: make sure clocks are on when doing hw init, Kuninori Morimoto
  • Re: [PATCH v2] i2c: rcar: make sure clocks are on when doing hw init, Laurent Pinchart
    • Re: [PATCH v2] i2c: rcar: make sure clocks are on when doing hw init, Wolfram Sang
    • Re: [PATCH v2] i2c: rcar: make sure clocks are on when doing hw init, Geert Uytterhoeven
      • Re: [PATCH v2] i2c: rcar: make sure clocks are on when doing hw init, Laurent Pinchart
• [PATCH] i2c: rcar: make sure clocks are on when doing hw init, Wolfram Sang
  • Re: [PATCH] i2c: rcar: make sure clocks are on when doing hw init, Geert Uytterhoeven
  • Re: [PATCH] i2c: rcar: make sure clocks are on when doing hw init, Kuninori Morimoto
    • Re: [PATCH] i2c: rcar: make sure clocks are on when doing hw init, Wolfram Sang
      • Re: [PATCH] i2c: rcar: make sure clocks are on when doing hw init, Kuninori Morimoto
        • Re: [PATCH] i2c: rcar: make sure clocks are on when doing hw init, Wolfram Sang
          • Re: [PATCH] i2c: rcar: make sure clocks are on when doing hw init, Kuninori Morimoto
• Issues with touchpad / touchscreen on yoga 900, Kevin Fenzi
  • Re: Issues with touchpad / touchscreen on yoga 900, Wolfram Sang
    • Re: Issues with touchpad / touchscreen on yoga 900, Jarkko Nikula
      • Re: Issues with touchpad / touchscreen on yoga 900, Kevin Fenzi
        • Re: Issues with touchpad / touchscreen on yoga 900, Kevin Fenzi
          • Re: Issues with touchpad / touchscreen on yoga 900, Mika Westerberg
            • Re: Issues with touchpad / touchscreen on yoga 900, Kevin Fenzi
              • Re: Issues with touchpad / touchscreen on yoga 900, Wolfram Sang
                • Re: Issues with touchpad / touchscreen on yoga 900, Mika Westerberg
                  • Re: Issues with touchpad / touchscreen on yoga 900, Wolfram Sang
                  • Re: Issues with touchpad / touchscreen on yoga 900, Valentino
• [PATCH] i2c: rcar: call rcar_i2c_init() after pm_runtime_get_sync(), Kuninori Morimoto
  • Re: [PATCH] i2c: rcar: call rcar_i2c_init() after pm_runtime_get_sync(), Geert Uytterhoeven
    • Re: [PATCH] i2c: rcar: call rcar_i2c_init() after pm_runtime_get_sync(), Wolfram Sang
    • Re: [PATCH] i2c: rcar: call rcar_i2c_init() after pm_runtime_get_sync(), Kuninori Morimoto
      • Re: [PATCH] i2c: rcar: call rcar_i2c_init() after pm_runtime_get_sync(), Geert Uytterhoeven
• [PATCH] MAINTAINERS: i2c: mark also subdirectories as maintained, Wolfram Sang
  • Re: [PATCH] MAINTAINERS: i2c: mark also subdirectories as maintained, Joe Perches
    • Re: [PATCH] MAINTAINERS: i2c: mark also subdirectories as maintained, Wolfram Sang
      • Re: [PATCH] MAINTAINERS: i2c: mark also subdirectories as maintained, Joe Perches
  • Re: [PATCH] MAINTAINERS: i2c: mark also subdirectories as maintained, Wolfram Sang
• Re: i2c-tools available commands, Jean Delvare
  • Message not available
    • RE: i2c-tools available commands, Jean Delvare
      • Re: i2c-tools available commands, Wolfram Sang
• [PATCH v2] i2c: cadence: Move to sensible power management, Shubhrajyoti Datta
  • Re: [PATCH v2] i2c: cadence: Move to sensible power management, Sören Brinkmann
    • Re: [PATCH v2] i2c: cadence: Move to sensible power management, Shubhrajyoti Datta
      • Re: [PATCH v2] i2c: cadence: Move to sensible power management, Shubhrajyoti Datta
        • Re: [PATCH v2] i2c: cadence: Move to sensible power management, Sören Brinkmann
          • Re: [PATCH v2] i2c: cadence: Move to sensible power management, Shubhrajyoti Datta
• [PATCHv2] i2c: cadence: Enable power management, Shubhrajyoti Datta
  • Re: [PATCHv2] i2c: cadence: Enable power management, Shubhrajyoti Datta
• [PATCH 1/4] i2c: added i2c quirk flag for unsupported clock stretching, Nicola Corna
  • [PATCH v3 4/4] iio: humidity: si7020: added No Hold read mode, Nicola Corna
    • Re: [PATCH v3 4/4] iio: humidity: si7020: added No Hold read mode, Wolfram Sang
    • Re: [PATCH v3 4/4] iio: humidity: si7020: added No Hold read mode, Nicola Corna
      • [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode, Nicola Corna
        • Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode, Lars-Peter Clausen
        • Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode, Nicola Corna
          • Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode, Lars-Peter Clausen
          • Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode, Nicola Corna
            • Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode, Lars-Peter Clausen
          • Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode, Nicola Corna
  • [PATCH 2/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-algo-bit.c, Nicola Corna
  • [PATCH 3/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c, Nicola Corna
    • Re: [PATCH 3/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c, Eric Anholt
    • Re: [PATCH 3/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c, Stephen Warren
  • [PATCH v2 1/5] i2c: add i2c quirk flag for unsupported clock stretching, Nicola Corna
    • [PATCH v2 3/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c, Nicola Corna
      • Re: [PATCH v2 3/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c, Wolfram Sang
    • [PATCH v2 2/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-algo-bit.c, Nicola Corna
      • Re: [PATCH v2 2/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-algo-bit.c, Wolfram Sang
    • [PATCH 4/5] i2c: add i2c_check_quirks helper function, Nicola Corna
      • Re: [PATCH 4/5] i2c: add i2c_check_quirks helper function, Jonathan Cameron
        • Re: [PATCH 4/5] i2c: add i2c_check_quirks helper function, Wolfram Sang
      • Re: [PATCH 4/5] i2c: add i2c_check_quirks helper function, Wolfram Sang
    • [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode, Nicola Corna
      • Re: [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode, Jonathan Cameron
        • Re: [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode, Wolfram Sang
          • Re: [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode, Jonathan Cameron
            • Re: [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode, Wolfram Sang
    • Re: [PATCH v2 1/5] i2c: add i2c quirk flag for unsupported clock stretching, Wolfram Sang
• [PATCH v2 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
  • [PATCH v2 1/9] eeprom: at24: platform_data: use BIT() macro, Bartosz Golaszewski
  • [PATCH v2 7/9] eeprom: at24: add the at24cs series to the list of supported devices, Bartosz Golaszewski
  • [PATCH v2 8/9] eeprom: at24: remove a reduntant if, Bartosz Golaszewski
  • [PATCH v2 6/9] eeprom: at24: improve the device_id table readability, Bartosz Golaszewski
  • [PATCH v2 9/9] eeprom: at24: readability tweaks, Bartosz Golaszewski
  • [PATCH v2 5/9] eeprom: at24: export the serial number through sysfs, Bartosz Golaszewski
  • [PATCH v2 3/9] eeprom: at24: tie up an additional address for at24cs series, Bartosz Golaszewski
  • [PATCH v2 4/9] eeprom: at24: support reading of the serial number, Bartosz Golaszewski
  • [PATCH v2 2/9] eeprom: at24: new flag in platform_data, Bartosz Golaszewski
• [PATCH 0/2] Mediatek I2C driver fixup, Liguo Zhang
  • [PATCH 2/2] i2c: mediatek: fix i2c multi transfer issue in high speed mode, Liguo Zhang
  • [PATCH 1/2] i2c: mediatek: add i2c first write then read optimization, Liguo Zhang
  • Re: [PATCH 0/2] Mediatek I2C driver fixup, Eddie Huang
• [PULL REQUEST] i2c for mfd for 4.4, Wolfram Sang
  • Re: [PULL REQUEST] i2c for mfd for 4.4, Lee Jones
• [PATCH] i2c: Enable Cadence driver for ARM64, Michal Simek
  • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Lee Jones
    • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Wolfram Sang
      • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Lee Jones
        • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Javier Martinez Canillas
          • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Lee Jones
            • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Javier Martinez Canillas
    • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Michal Simek
      • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Lee Jones
  • Re: [PATCH] i2c: Enable Cadence driver for ARM64, Wolfram Sang
• [PATCH] i2c: i801: Document Intel DNV and Broxton, Jarkko Nikula
  • Re: [PATCH] i2c: i801: Document Intel DNV and Broxton, Mika Westerberg
    • Re: [PATCH] i2c: i801: Document Intel DNV and Broxton, Jean Delvare
  • Re: [PATCH] i2c: i801: Document Intel DNV and Broxton, Wolfram Sang
• [Patch V9] i2c: imx: add runtime pm support to improve the performance, Gao Pan
  • RE: [Patch V9] i2c: imx: add runtime pm support to improve the performance, Gao Pandy
  • RE: [Patch V9] i2c: imx: add runtime pm support to improve the performance, Gao Pandy
    • Re: [Patch V9] i2c: imx: add runtime pm support to improve the performance, Uwe Kleine-König
• [PATCH] MAINTAINERS: i2c: drop i2c-pnx maintainer, Wolfram Sang
  • Re: [PATCH] MAINTAINERS: i2c: drop i2c-pnx maintainer, Wolfram Sang
• [PATCH] i2c: pnx: remove superfluous assignment, Wolfram Sang
  • Re: [PATCH] i2c: pnx: remove superfluous assignment, Wolfram Sang
• [PATCH] driver/i2c: Add API to add new I2C device without registering, York Sun
• [PATCH v2 0/2] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform, Masahiro Yamada
  • [PATCH v2 2/2] i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver, Masahiro Yamada
    • Re: [PATCH v2 2/2] i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver, Wolfram Sang
  • [PATCH v2 1/2] i2c: uniphier: add UniPhier FIFO-less I2C driver, Masahiro Yamada
    • Re: [PATCH v2 1/2] i2c: uniphier: add UniPhier FIFO-less I2C driver, Wolfram Sang
  • Re: [PATCH v2 0/2] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform, Lee Jones
    • Re: [PATCH v2 0/2] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform, Masahiro Yamada
      • Re: [PATCH v2 0/2] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform, Geert Uytterhoeven
        • Re: [PATCH v2 0/2] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform, Wolfram Sang
        • Re: [PATCH v2 0/2] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform, Lee Jones
• [PATCH v4 0/5] enable I2C devices behind I2C bus on Gen2, Andy Shevchenko
  • [PATCH v4 1/5] mfd: core: redo ACPI matching of the children devices, Andy Shevchenko
  • [PATCH v4 3/5] mfd: intel_quark_i2c_gpio: support devices behind i2c bus, Andy Shevchenko
  • [PATCH v4 5/5] pwm-pca9685: enable ACPI device found on Galileo Gen2, Andy Shevchenko
    • Re: [PATCH v4 5/5] pwm-pca9685: enable ACPI device found on Galileo Gen2, Andy Shevchenko
      • Re: [PATCH v4 5/5] pwm-pca9685: enable ACPI device found on Galileo Gen2, Thierry Reding
  • [PATCH v4 2/5] mfd: intel_quark_i2c_gpio: load gpio driver first, Andy Shevchenko
  • [PATCH v4 4/5] at24: enable ACPI device found on Galileo Gen2, Andy Shevchenko
    • Re: [PATCH v4 4/5] at24: enable ACPI device found on Galileo Gen2, Ben Gardner
  • Re: [PATCH v4 0/5] enable I2C devices behind I2C bus on Gen2, Wolfram Sang
    • Re: [PATCH v4 0/5] enable I2C devices behind I2C bus on Gen2, Andy Shevchenko
    • Re: [PATCH v4 0/5] enable I2C devices behind I2C bus on Gen2, Lee Jones
• [PATCH V6 1/6] i2c: Add i2c support to Freescale Layerscape platforms, Zhiqiang Hou
  • [PATCH V6 2/6] watchdog: Add support for Freescale Layerscape platforms, Zhiqiang Hou
  • [PATCH V6 3/6] Documentation: DT: Add entry for FSL LS1043ARDB board, Zhiqiang Hou
    • Re: [PATCH V6 3/6] Documentation: DT: Add entry for FSL LS1043ARDB board, Olof Johansson
  • [PATCH V6 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Zhiqiang Hou
    • Re: [PATCH V6 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Li Yang
  • [PATCH V6 5/6] clk: qoriq: Add ls1043a support., Zhiqiang Hou
    • Re: [PATCH V6 5/6] clk: qoriq: Add ls1043a support., Leo Li
      • Re: [PATCH V6 5/6] clk: qoriq: Add ls1043a support., Scott Wood
  • [PATCH V6 6/6] dts/ls1043a: add LS1043ARDB board support, Zhiqiang Hou
    • Re: [PATCH V6 6/6] dts/ls1043a: add LS1043ARDB board support, Li Yang
      • RE: [PATCH V6 6/6] dts/ls1043a: add LS1043ARDB board support, Hou Zhiqiang
  • Re: [PATCH V6 1/6] i2c: Add i2c support to Freescale Layerscape platforms, Wolfram Sang
• [PATCH 1/1] i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller", Ken Xue
  • Re: [PATCH 1/1] i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller", Mika Westerberg
  • Re: [PATCH 1/1] i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller", Wolfram Sang
• ACPI I2C device-driver matching issue, Ben Gardner
  • Re: ACPI I2C device-driver matching issue, Rafael J. Wysocki
    • Re: ACPI I2C device-driver matching issue, Mika Westerberg
• [PATCH] i2c: i2c-imx: Use -ENXIO as error in the NACK case, Fabio Estevam
  • Re: [PATCH] i2c: i2c-imx: Use -ENXIO as error in the NACK case, Wolfram Sang
• [PATCH] i2c: i801: Add support for Intel Broxton, Jarkko Nikula
  • Re: [PATCH] i2c: i801: Add support for Intel Broxton, Wolfram Sang
  • Re: [PATCH] i2c: i801: Add support for Intel Broxton, Jean Delvare
    • Re: [PATCH] i2c: i801: Add support for Intel Broxton, Jarkko Nikula
• Re: linux-next: Tree for Oct 21 (drivers/i2c/busses/i2c-designware-platdrv.c), Randy Dunlap
  • Re: linux-next: Tree for Oct 21 (drivers/i2c/busses/i2c-designware-platdrv.c), Jarkko Nikula
• [MinnowBoard] Linux x86 I2C device probing with ACPI, Christophe Ricard
  • Re: [MinnowBoard] Linux x86 I2C device probing with ACPI, Mika Westerberg
    • Re: [MinnowBoard] Linux x86 I2C device probing with ACPI, Christophe Ricard
      • Re: [MinnowBoard] Linux x86 I2C device probing with ACPI, Andy Shevchenko
• [PATCH] i2c: designware: Disable runtime PM in case i2c_dw_probe() fails, Jarkko Nikula
  • Re: [PATCH] i2c: designware: Disable runtime PM in case i2c_dw_probe() fails, Mika Westerberg
  • Re: [PATCH] i2c: designware: Disable runtime PM in case i2c_dw_probe() fails, Wolfram Sang
• [PATCH v2 1/2] i2c: at91: fix write transfers by clearing pending interrupt first, Ludovic Desroches
  • [PATCH v2 2/2] i2c: at91: manage unexpected RXRDY flag when starting a transfer, Ludovic Desroches
    • Re: [PATCH v2 2/2] i2c: at91: manage unexpected RXRDY flag when starting a transfer, Wolfram Sang
      • [PATCH v3] i2c: at91: manage unexpected RXRDY flag when starting a transfer, Ludovic Desroches
        • Re: [PATCH v3] i2c: at91: manage unexpected RXRDY flag when starting a transfer, Wolfram Sang
  • Re: [PATCH v2 1/2] i2c: at91: fix write transfers by clearing pending interrupt first, Wolfram Sang
• [PATCH] i2c: designware: fix platform driver probe rename, Arnd Bergmann
  • Re: [PATCH] i2c: designware: fix platform driver probe rename, Andy Shevchenko
• [PATCH] i2c: designware: Fix build error when !CONFIG_PM_SLEEP, Jarkko Nikula
  • Re: [PATCH] i2c: designware: Fix build error when !CONFIG_PM_SLEEP, Wolfram Sang
• [PATCH 0/9] i2c: brcmstb: add support for BMIPS_GENERIC, Jaedon Shin
  • [PATCH 1/9] i2c: brcmstb: make the driver buildable on BMIPS_GENERIC, Jaedon Shin
    • Re: [PATCH 1/9] i2c: brcmstb: make the driver buildable on BMIPS_GENERIC, Florian Fainelli
  • [PATCH 2/9] i2c: brcmstb: fix typo in i2c-brcmstb, Jaedon Shin
    • Re: [PATCH 2/9] i2c: brcmstb: fix typo in i2c-brcmstb, Florian Fainelli
  • [PATCH 3/9] i2c: brcmstb: add missing parenthesis, Jaedon Shin
    • Re: [PATCH 3/9] i2c: brcmstb: add missing parenthesis, Florian Fainelli
      • Re: [PATCH 3/9] i2c: brcmstb: add missing parenthesis, Wolfram Sang
  • [PATCH 4/9] i2c: brcmstb: enable ACK condition, Jaedon Shin
    • Re: [PATCH 4/9] i2c: brcmstb: enable ACK condition, Wolfram Sang
      • Re: [PATCH 4/9] i2c: brcmstb: enable ACK condition, Jaedon Shin
        • Re: [PATCH 4/9] i2c: brcmstb: enable ACK condition, Kamal Dasu
          • Re: [PATCH 4/9] i2c: brcmstb: enable ACK condition, Wolfram Sang
  • [PATCH 5/9] i2c: brcmstb: fix start and stop conditions, Jaedon Shin
    • Re: [PATCH 5/9] i2c: brcmstb: fix start and stop conditions, Wolfram Sang
  • [PATCH 6/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7346, Jaedon Shin
    • Re: [PATCH 6/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7346, Florian Fainelli
  • [PATCH 8/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7360, Jaedon Shin
    • Re: [PATCH 8/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7360, Florian Fainelli
  • [PATCH 9/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7362, Jaedon Shin
    • Re: [PATCH 9/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7362, Florian Fainelli
  • [PATCH 7/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7358, Jaedon Shin
    • Re: [PATCH 7/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7358, Florian Fainelli
• [PATCH] i2c: busses: Use setup_timer, Muhammad Falak R Wani
  • Re: [PATCH] i2c: busses: Use setup_timer, Wolfram Sang
• [PATCH] i2c: mv64xxx: really allow I2C offloading, Thomas Petazzoni
  • Re: [PATCH] i2c: mv64xxx: really allow I2C offloading, Wolfram Sang
    • RE: [PATCH] i2c: mv64xxx: really allow I2C offloading, Hezi Shahmoon
      • Re: [PATCH] i2c: mv64xxx: really allow I2C offloading, Thomas Petazzoni
        • Re: [PATCH] i2c: mv64xxx: really allow I2C offloading, Wolfram Sang
  • Re: [PATCH] i2c: mv64xxx: really allow I2C offloading, Wolfram Sang
• [RESEND PATCH 0/4] i2c: Fix module autoload for OF platform drivers, Luis de Bethencourt
  • [RESEND PATCH 3/4] i2c: rk3x: Fix module autoload for OF platform driver, Luis de Bethencourt
  • [RESEND PATCH 2/4] i2c: meson: Fix module autoload for OF platform driver, Luis de Bethencourt
  • [RESEND PATCH 1/4] i2c: ibm-iic: Fix module autoload for OF platform driver, Luis de Bethencourt
  • [RESEND PATCH 4/4] i2c: stu300: Fix module autoload for OF platform driver, Luis de Bethencourt
  • Re: [RESEND PATCH 0/4] i2c: Fix module autoload for OF platform drivers, Wolfram Sang
• [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
  • [RESEND PATCH 1/9] eeprom: at24: platform_data: use BIT() macro, Bartosz Golaszewski
  • [RESEND PATCH 9/9] eeprom: at24: readability tweaks, Bartosz Golaszewski
  • [RESEND PATCH 5/9] eeprom: at24: export the serial number through sysfs, Bartosz Golaszewski
  • [RESEND PATCH 8/9] eeprom: at24: remove a reduntant if, Bartosz Golaszewski
  • [RESEND PATCH 6/9] eeprom: at24: improve the device_id table readability, Bartosz Golaszewski
  • [RESEND PATCH 7/9] eeprom: at24: add the at24cs series to the list of supported devices, Bartosz Golaszewski
  • [RESEND PATCH 3/9] eeprom: at24: tie up an additional address for at24cs series, Bartosz Golaszewski
  • [RESEND PATCH 4/9] eeprom: at24: support reading of the serial number, Bartosz Golaszewski
  • [RESEND PATCH 2/9] eeprom: at24: new flag in platform_data, Bartosz Golaszewski
  • Re: [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read, Peter Korsgaard
    • Re: [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
      • Re: [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read, Peter Korsgaard
        • Re: [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read, Bartosz Golaszewski
          • Re: [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read, Peter Korsgaard
• [PATCH 2/2] i2c: designware: remove freq definition for "AMD0010" in acpi_device_id, Ken Xue
• [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Ken Xue
  • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Mika Westerberg
    • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Ken Xue
      • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Mika Westerberg
        • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Ken Xue
          • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Mika Westerberg
            • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Ken Xue
              • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Mika Westerberg
                • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Ken Xue
                  • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Mika Westerberg
                  • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Mika Westerberg
                    • Re: [PATCH 1/2] i2c: designware: register clkdev during acpi device configuration, Ken Xue
• [PATCH] i2c: slave: add 8 bit seconds counter backend, Wolfram Sang
• [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms, Zhiqiang Hou
  • [PATCH V5 2/6] watchdog: Add support for Freescale Layerscape platforms, Zhiqiang Hou
  • [PATCH V5 3/6] Documentation: DT: Add entry for FSL LS1043ARDB board, Zhiqiang Hou
  • [PATCH V5 5/6] clk: qoriq: Add ls1043a support., Zhiqiang Hou
  • [PATCH V5 6/6] dts/ls1043a: add LS1043ARDB board support, Zhiqiang Hou
  • [PATCH V5 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Zhiqiang Hou
  • Re: [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms, Wolfram Sang
    • RE: [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms, Hou Zhiqiang
• [Patch V8] i2c: imx: implement bus recovery, Gao Pan
  • Re: [Patch V8] i2c: imx: implement bus recovery, Sascha Hauer
  • Re: [Patch V8] i2c: imx: implement bus recovery, Wolfram Sang
  • <Possible follow-ups>
  • [Patch V8] i2c: imx: implement bus recovery, Gao Pan
    • Re: [Patch V8] i2c: imx: implement bus recovery, Wolfram Sang
• [PATCH] i2c: pnx: fix warnings caused by enabling unprepared clock, Vladimir Zapolskiy
  • Re: [PATCH] i2c: pnx: fix warnings caused by enabling unprepared clock, Shubhrajyoti Datta
    • Re: [PATCH] i2c: pnx: fix warnings caused by enabling unprepared clock, Vladimir Zapolskiy
      • Re: [PATCH] i2c: pnx: fix warnings caused by enabling unprepared clock, Shubhrajyoti Datta
        • Re: [PATCH] i2c: pnx: fix warnings caused by enabling unprepared clock, Vladimir Zapolskiy
  • Re: [PATCH] i2c: pnx: fix warnings caused by enabling unprepared clock, Wolfram Sang
    • Re: [PATCH] i2c: pnx: fix warnings caused by enabling unprepared clock, Wolfram Sang
• [PATCH] i2c: cadence: Move to sensible power management, Shubhrajyoti Datta
  • Re: [PATCH] i2c: cadence: Move to sensible power management, Shubhrajyoti Datta
  • Re: [PATCH] i2c: cadence: Move to sensible power management, Wolfram Sang
    • Re: [PATCH] i2c: cadence: Move to sensible power management, Shubhrajyoti Datta
• [PATCH] MAINTAINERS: add maintainers for Synopsis Designware I2C drivers, Wolfram Sang
  • Re: [PATCH] MAINTAINERS: add maintainers for Synopsis Designware I2C drivers, Mika Westerberg
  • Re: [PATCH] MAINTAINERS: add maintainers for Synopsis Designware I2C drivers, Andy Shevchenko
  • Re: [PATCH] MAINTAINERS: add maintainers for Synopsis Designware I2C drivers, Wolfram Sang
• [PATCH V4 1/6] i2c: Add i2c support to Freescale Layerscape platforms, Zhiqiang Hou
  • [PATCH V4 2/6] watchdog: Add support for Freescale Layerscape platforms, Zhiqiang Hou
    • Re: [PATCH V4 2/6] watchdog: Add support for Freescale Layerscape platforms, Guenter Roeck
      • RE: [PATCH V4 2/6] watchdog: Add support for Freescale Layerscape platforms, Hou Zhiqiang
  • [PATCH V4 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Zhiqiang Hou
    • Re: [PATCH V4 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Scott Wood
      • RE: [PATCH V4 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Hou Zhiqiang
        • RE: [PATCH V4 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Sharma Bhupesh
          • RE: [PATCH V4 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Hou Zhiqiang
      • RE: [PATCH V4 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Hu Vincent
  • [PATCH V4 5/6] clk: qoriq: Add ls1043a support., Zhiqiang Hou
    • Re: [PATCH V4 5/6] clk: qoriq: Add ls1043a support., Stephen Boyd
      • RE: [PATCH V4 5/6] clk: qoriq: Add ls1043a support., Hou Zhiqiang
  • [PATCH V4 6/6] dts/ls1043a: add LS1043ARDB board support, Zhiqiang Hou
  • [PATCH V4 3/6] Documentation: DT: Add entry for FSL LS1043ARDB board, Zhiqiang Hou
• [PATCH V3 0/6] Add LS1043A SoC support, Zhiqiang Hou
  • [PATCH V3 1/6] i2c: Add i2c support to Freescale Layerscape platforms, Zhiqiang Hou
  • [PATCH V3 3/6] Documentation: DT: Add entry for FSL LS1043ARDB board, Zhiqiang Hou
  • [PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Zhiqiang Hou
    • Re: [PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Mark Rutland
      • RE: [PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Hou Zhiqiang
    • Re: [PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Scott Wood
      • RE: [PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC, Hou Zhiqiang
  • [PATCH V3 2/6] watchdog: Add support for Freescale Layerscape platforms, Zhiqiang Hou
    • Re: [PATCH V3 2/6] watchdog: Add support for Freescale Layerscape platforms, Guenter Roeck
  • [PATCH V3 5/6] clk: qoriq: Add ls1043a support., Zhiqiang Hou
    • Re: [PATCH V3 5/6] clk: qoriq: Add ls1043a support., Stephen Boyd
      • Re: [PATCH V3 5/6] clk: qoriq: Add ls1043a support., Scott Wood
        • Re: [PATCH V3 5/6] clk: qoriq: Add ls1043a support., Stephen Boyd
          • Re: [PATCH V3 5/6] clk: qoriq: Add ls1043a support., Scott Wood
  • [PATCH V3 6/6] dts/ls1043a: add LS1043ARDB board support, Zhiqiang Hou
  • <Possible follow-ups>
  • RE: [PATCH V3 0/6] Add LS1043A SoC support, Hou Zhiqiang
• [GIT PULL] On-demand device probing, Tomeu Vizoso
  • Re: [GIT PULL] On-demand device probing, Mark Brown
    • [GIT PULL] On-demand device probing, Tomeu Vizoso
      • Re: [GIT PULL] On-demand device probing, Olof Johansson
        • Re: [GIT PULL] On-demand device probing, Rob Herring
          • Re: [GIT PULL] On-demand device probing, Olof Johansson
  • Re: [GIT PULL] On-demand device probing, Greg Kroah-Hartman
    • Re: [GIT PULL] On-demand device probing, Rob Herring
      • Re: [GIT PULL] On-demand device probing, Greg Kroah-Hartman
        • Re: [GIT PULL] On-demand device probing, Rob Herring
          • Re: [GIT PULL] On-demand device probing, Greg Kroah-Hartman
            • Re: [GIT PULL] On-demand device probing, Rob Clark
              • Re: [GIT PULL] On-demand device probing, Greg Kroah-Hartman
                • Re: [GIT PULL] On-demand device probing, Rob Clark
                  • Re: [GIT PULL] On-demand device probing, Greg Kroah-Hartman
                    • Re: [GIT PULL] On-demand device probing, Rob Clark
                      • Re: [GIT PULL] On-demand device probing, Greg Kroah-Hartman
                  • Re: [GIT PULL] On-demand device probing, Noralf Trønnes
                    • Re: [GIT PULL] On-demand device probing, Rob Clark
        • Re: [GIT PULL] On-demand device probing, Mark Brown
    • Re: [GIT PULL] On-demand device probing, Mark Brown
      • Re: [GIT PULL] On-demand device probing, Greg Kroah-Hartman
        • Re: [GIT PULL] On-demand device probing, Mark Brown
          • Re: [GIT PULL] On-demand device probing, David Woodhouse
            • Re: [GIT PULL] On-demand device probing, Russell King - ARM Linux
            • Re: [GIT PULL] On-demand device probing, Mark Brown
            • Re: [GIT PULL] On-demand device probing, Rob Herring
              • Re: [GIT PULL] On-demand device probing, David Woodhouse
                • Re: [GIT PULL] On-demand device probing, Mark Brown
                  • Re: [GIT PULL] On-demand device probing, David Woodhouse
                    • Re: [GIT PULL] On-demand device probing, Russell King - ARM Linux
                      • Re: [GIT PULL] On-demand device probing, Uwe Kleine-König
                        • Re: [GIT PULL] On-demand device probing, Russell King - ARM Linux
                          • Re: [GIT PULL] On-demand device probing, Alexandre Courbot
                      • Re: [GIT PULL] On-demand device probing, David Woodhouse
                    • Re: [GIT PULL] On-demand device probing, Rob Herring
                      • Re: [GIT PULL] On-demand device probing, Rafael J. Wysocki
                        • Re: [GIT PULL] On-demand device probing, Rob Herring
                          • Re: [GIT PULL] On-demand device probing, Rafael J. Wysocki