On 23/12/15 09:34, Ken Xue wrote: > On Tue, 2015-12-15 at 16:59 +0200, Mika Westerberg wrote: >> On Tue, Dec 15, 2015 at 08:52:19AM -0600, Suravee Suthikulpanit wrote: > During test, I2C bus should run in different "ConnectionSpeed" of > device. > > That means windows driver can modify I2C bus speed to match the > "ConnectionSpeed" of device on-the-fly. Static value from SSCN and FMCN > can not work for WITT test cases. > > It sounds like odd that multi-speed can be applied over one I2C bus, But > everything goes well. > Does this behavior(multi-speed) violate the I2C spec? I can't remember if the spec says it, but I would say the bus should run at the speed of the slowest attached peripheral as they all have to listen for the address-byte being sent at the start of each i2c transaction. -- Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
