Now that we are using the transaction halt interrupt to safely control repeated start transfers, we no longer need to handle the fifo emptying interrupts. Handling this interrupt along with Transaction Halt interrupt can cause erratic behaviour. Signed-off-by: Sifan Naeem <sifan.naeem@xxxxxxxxxx> --- drivers/i2c/busses/i2c-img-scb.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index c92bcf7c204f..0af554a16ae5 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -154,7 +154,6 @@ #define INT_TIMING BIT(18) #define INT_FIFO_FULL_FILLING (INT_FIFO_FULL | INT_FIFO_FILLING) -#define INT_FIFO_EMPTY_EMPTYING (INT_FIFO_EMPTY | INT_FIFO_EMPTYING) /* Level interrupts need clearing after handling instead of before */ #define INT_LEVEL 0x01e00 @@ -176,8 +175,7 @@ INT_WRITE_ACK_ERR | \ INT_FIFO_FULL | \ INT_FIFO_FILLING | \ - INT_FIFO_EMPTY | \ - INT_FIFO_EMPTYING) + INT_FIFO_EMPTY) #define INT_ENABLE_MASK_WAITSTOP (INT_SLAVE_EVENT | \ INT_ADDR_ACK_ERR | \ @@ -874,16 +872,8 @@ static unsigned int img_i2c_auto(struct img_i2c *i2c, return ISR_WAITSTOP; } } else { - if (int_status & INT_FIFO_EMPTY_EMPTYING) { - /* - * The write fifo empty indicates that we're in the - * last byte so it's safe to start a new write - * transaction without losing any bytes from the - * previous one. - * see 2.3.7 Repeated Start Transactions. - */ - if ((int_status & INT_FIFO_EMPTY) && - i2c->msg.len == 0) + if (int_status & INT_FIFO_EMPTY) { + if (i2c->msg.len == 0) return ISR_WAITSTOP; img_i2c_write_fifo(i2c); } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html