The SB800 chipset supports a multiplexed main SMBus controller with
four ports. The multiplexed ports share the same SMBus address and
register set. The port is selected by bits 2:1 of the smb_en register
(0x2C).
Only one port can be active at any point in time therefore a mutex is
needed in order to synchronize access.
Additionally, the commit avoids requesting and releasing the SMBus base
address index region on every multiplexed transfer by moving the
request_region call into piix4_probe.
Tested on HP ProLiant MicroServer G7 N54L (where this patch adds
support to access sensor data from the w83795adg).
Cc: Thomas Brandon <tbrandonau@xxxxxxxxx>
Cc: Eddi De Pieri <eddi@xxxxxxxxxxx>
Signed-off-by: Christian Fetzer <fetzer.ch@xxxxxxxxx>
---
drivers/i2c/busses/i2c-piix4.c | 165 +++++++++++++++++++++++++++++++++++------
1 file changed, 143 insertions(+), 22 deletions(-)
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 9c32eb1..780f2b9 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -23,6 +23,9 @@
Note: we assume there can only be one device, with one or more
SMBus interfaces.
+ The device can register multiple i2c_adapters (up to PIIX4_MAX_ADAPTERS).
+ For devices supporting multiple ports the i2c_adapter should provide
+ an i2c_algorithm to access them.
*/
#include <linux/module.h>
@@ -37,6 +40,7 @@
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/io.h>
+#include <linux/mutex.h>
/* PIIX4 SMBus address offsets */
@@ -78,6 +82,9 @@
/* Multi-port constants */
#define PIIX4_MAX_ADAPTERS 4
+/* SB800 constants */
+#define SB800_PIIX4_SMB_IDX 0xcd6
+
/* insmod parameters */
/* If force is set to anything different from 0, we forcibly enable the
@@ -127,6 +134,11 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
struct i2c_piix4_adapdata {
unsigned short smba;
+
+ /* SB800 */
+ bool sb800_main;
+ unsigned short port;
+ struct mutex *mutex;
};
static int piix4_setup(struct pci_dev *PIIX4_dev,
@@ -232,7 +244,6 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
const struct pci_device_id *id, u8 aux)
{
unsigned short piix4_smba;
- unsigned short smba_idx = 0xcd6;
u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
u8 i2ccfg, i2ccfg_offset = 0x10;
@@ -254,16 +265,10 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
else
smb_en = (aux) ? 0x28 : 0x2c;
- if (!request_region(smba_idx, 2, "smba_idx")) {
- dev_err(&PIIX4_dev->dev, "SMBus base address index region "
- "0x%x already in use!\n", smba_idx);
- return -EBUSY;
- }
- outb_p(smb_en, smba_idx);
- smba_en_lo = inb_p(smba_idx + 1);
- outb_p(smb_en + 1, smba_idx);
- smba_en_hi = inb_p(smba_idx + 1);
- release_region(smba_idx, 2);
+ outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+ smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+ outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
+ smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
if (!smb_en) {
smb_en_status = smba_en_lo & 0x10;
@@ -527,6 +532,43 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
return 0;
}
+/*
+ * Handles access to multiple SMBus ports on the SB800.
+ * The port is selected by bits 2:1 of the smb_en register (0x2C).
+ * Returns negative errno on error.
+ *
+ * Note: The selected port must be returned to the initial selection to avoid
+ * problems on certain systems.
+ */
+static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
+ u8 smba_en_lo, smb_en = 0x2c;
+ u8 port;
+ int retval;
+
+ mutex_lock(adapdata->mutex);
+
+ outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+ smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+
+ port = adapdata->port;
+ if ((smba_en_lo & 6) != (port << 1))
+ outb_p((smba_en_lo & ~6) | (port << 1),
+ SB800_PIIX4_SMB_IDX + 1);
+
+ retval = piix4_access(adap, addr, flags, read_write,
+ command, size, data);
+
+ outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1);
+
+ mutex_unlock(adapdata->mutex);
+
+ return retval;
+}
+
static u32 piix4_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
@@ -539,6 +581,11 @@ static const struct i2c_algorithm smbus_algorithm = {
.functionality = piix4_func,
};
+static const struct i2c_algorithm piix4_smbus_algorithm_sb800 = {
+ .smbus_xfer = piix4_access_sb800,
+ .functionality = piix4_func,
+};
+
static const struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
@@ -614,6 +661,53 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
return 0;
}
+static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba)
+{
+ struct mutex *mutex;
+ struct i2c_piix4_adapdata *adapdata;
+ int port;
+ int retval;
+
+ mutex = kzalloc(sizeof(*mutex), GFP_KERNEL);
+ if (mutex == NULL)
+ return -ENOMEM;
+
+ mutex_init(mutex);
+
+ for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
+ retval = piix4_add_adapter(dev, smba,
+ &piix4_main_adapters[port]);
+ if (retval < 0)
+ goto error;
+
+ piix4_main_adapters[port]->algo = &piix4_smbus_algorithm_sb800;
+
+ adapdata = i2c_get_adapdata(piix4_main_adapters[port]);
+ adapdata->sb800_main = true;
+ adapdata->port = port;
+ adapdata->mutex = mutex;
+ }
+
+ return retval;
+
+error:
+ dev_err(&dev->dev,
+ "Error setting up SB800 adapters. Unregistering!\n");
+ while (--port >= 0) {
+ adapdata = i2c_get_adapdata(piix4_main_adapters[port]);
+ if (adapdata->smba) {
+ i2c_del_adapter(piix4_main_adapters[port]);
+ kfree(adapdata);
+ kfree(piix4_main_adapters[port]);
+ piix4_main_adapters[port] = NULL;
+ }
+ }
+
+ kfree(mutex);
+
+ return retval;
+}
+
static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int retval;
@@ -621,20 +715,41 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
if ((dev->vendor == PCI_VENDOR_ID_ATI &&
dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
dev->revision >= 0x40) ||
- dev->vendor == PCI_VENDOR_ID_AMD)
+ dev->vendor == PCI_VENDOR_ID_AMD) {
+ if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) {
+ dev_err(&dev->dev,
+ "SMBus base address index region 0x%x already in use!\n",
+ SB800_PIIX4_SMB_IDX);
+ return -EBUSY;
+ }
+
/* base address location etc changed in SB800 */
retval = piix4_setup_sb800(dev, id, 0);
- else
- retval = piix4_setup(dev, id);
+ if (retval < 0) {
+ release_region(SB800_PIIX4_SMB_IDX, 2);
+ return retval;
+ }
- /* If no main SMBus found, give up */
- if (retval < 0)
- return retval;
+ /*
+ * Try to register multiplexed main SMBus adapter,
+ * give up if we can't
+ */
+ retval = piix4_add_adapters_sb800(dev, retval);
+ if (retval < 0) {
+ release_region(SB800_PIIX4_SMB_IDX, 2);
+ return retval;
+ }
+ } else {
+ retval = piix4_setup(dev, id);
+ if (retval < 0)
+ return retval;
- /* Try to register main SMBus adapter, give up if we can't */
- retval = piix4_add_adapter(dev, retval, &piix4_main_adapters[0]);
- if (retval < 0)
- return retval;
+ /* Try to register main SMBus adapter, give up if we can't */
+ retval = piix4_add_adapter(dev, retval,
+ &piix4_main_adapters[0]);
+ if (retval < 0)
+ return retval;
+ }
/* Check for auxiliary SMBus on some AMD chipsets */
retval = -ENODEV;
@@ -669,7 +784,13 @@ static void piix4_adap_remove(struct i2c_adapter *adap)
if (adapdata->smba) {
i2c_del_adapter(adap);
- release_region(adapdata->smba, SMBIOSIZE);
+ if (adapdata->port == 0) {
+ release_region(adapdata->smba, SMBIOSIZE);
+ if (adapdata->sb800_main) {
+ kfree(adapdata->mutex);
+ release_region(SB800_PIIX4_SMB_IDX, 2);
+ }
+ }
kfree(adapdata);
kfree(adap);
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
