Re: [V5,4/6] i2c: qup: Add bam dma capabilities

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 17, 2015 at 05:15:25PM +0530, Sricharan R wrote:
> QUP cores can be attached to a BAM module, which acts as a dma engine for the
> QUP core. When DMA with BAM is enabled, the BAM consumer pipe transmitted data
> is written to the output FIFO and the BAM producer pipe received data is read
> from the input FIFO.
> 
> With BAM capabilities, qup-i2c core can transfer more than 256 bytes, without a
> 'stop' which is not possible otherwise.
> 
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> ---

Reviewed-by: Andy Gross <andy.gross@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux