Add i2c dtsi node for MT2701.
Signed-off-by: Liguo Zhang <liguo.zhang@xxxxxxxxxxxx>
---
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bd88ae9..bb34770 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -159,6 +159,48 @@
<0 0x10216000 0 0x2000>;
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt2701-uart",
"mediatek,mt6577-uart";
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
