Linux Kernel I2C

• Thread Index

• Re: [RFC PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH resend 2/2] i2c: hix5hd2: add i2c controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
• Re: [PATCH resend 2/2] i2c: hix5hd2: add i2c controller driver
  • From: zhangfei <zhangfei.gao@xxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFC PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFC PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 3.17
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v6 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v6 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v6 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v6 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v6 0/4] mfd: add support for Diolan DLN-2
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: i2c_transfer & dma
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• RE: [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: "fugang.duan@xxxxxxxxxxxxx" <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH v8 0/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• RE: [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v8 2/2] Documentation:add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v8 0/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: move acpi code back into the core
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2] i2c: move acpi code back into the core
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• RE: [PATCH 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v2 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH v2 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• RE: [PATCH 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• RE: [PATCH 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v2] i2c: move acpi code back into the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 09/27] i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH 10/27] i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH 08/27] i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] i2c: move acpi code back into the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: move acpi code back into the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v5 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• i2c_transfer & dma
  • From: Peter Hüwe <PeterHuewe@xxxxxx>
• Re: [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: detect No Slave Ack on SELECT in PIO mode
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH] i2c-mxs: detect No Slave Ack on SELECT in PIO mode
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: move acpi code back into the core
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] i2c: move acpi code back into the core
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: move acpi code back into the core
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] i2c: move acpi code back into the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: move acpi code back into the core
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH] i2c: move acpi code back into the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: move acpi code back into the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH] i2c-rk3x: move setup to the earlier subsys initcall
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-rk3x: move setup to the earlier subsys initcall
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c-rk3x: move setup to the earlier subsys initcall
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• Re: [PATCH] i2c-rk3x: move setup to the earlier subsys initcall
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• Re: [PATCH] i2c-mxs: fixed PIO NACK error instead of timeout (1000ms)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: detect No Slave Ack on SELECT in PIO mode
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: detect No Slave Ack on SELECT in PIO mode
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Anders Berg <anders.berg@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Anders Berg <anders.berg@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Anders Berg <anders.berg@xxxxxxxxxxxxx>
• [PATCH 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• Re: [PATCH v5 06/11] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 06/11] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• [PATCH 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter
  • From: Muthu Mani <muth@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: cadence: Remove .owner field for driver
  • From: Michal Simek <monstr@xxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Anders Berg <anders.berg@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] i2c-rk3x: move setup to the earlier subsys initcall
  • From: Chris Zhong <zyw@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] i2c: rcar: add renesas,i2c-rcar-gen1/gen2 in DT compatible
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] i2c-rcar: fix RCAR_IRQ_ACK_{RECV|SEND}
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 06/11] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: fixed error message in pio transfer
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c-mxs: fixed PIO NACK error instead of timeout (1000ms)
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] i2c-ismt: use correct length when copy buffer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c-ismt: Use minimum descriptor size
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: fixed PIO NACK error instead of timeout (1000ms)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: fixed error message in pio transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: imx: Add arbitration lost check
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 06/11] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix divisor calculation for SCL frequency
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Remove unlikely() annotations
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: rcar: remove sign-compare flaw
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-rcar: check for no IRQ in rcar_i2c_irq()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-rcar: fix RCAR_IRQ_ACK_{RECV|SEND}
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c-rcar: make rcar_i2c_irq_recv() *void*
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c-rcar: make rcar_i2c_prepare_msg() *void*
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c-rcar: simplify check for last message
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: Rework probe() to get clock a bit later
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: designware: add support of platform data to set I2C mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c designware add support of I2C standard mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: cadence: Remove .owner field for driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: i2c-core.ko renamed to i2ccore.ko
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v5 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v5 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v5 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v5 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v5 1/4] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v5 0/4] mfd: add support for Diolan DLN-2
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v5 06/11] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/5] i2c: rcar: add renesas,i2c-rcar-gen1/gen2 in DT compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH resend 2/2] i2c: hix5hd2: add i2c controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] i2c: Don't start transfers when suspended
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] i2c: designware: Rework probe() to get clock a bit later
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: i2c-core.ko renamed to i2ccore.ko
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: i2c-core.ko renamed to i2ccore.ko
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 2/2] input: cros_ec_keyb: Add of match table
  • From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
• [PATCH 1/2 v2] i2c: cros-ec-tunnel: Add of match table
  • From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
• [PATCH 0/2 v2] Add OF match tables for the ChromeOs EC subdevices
  • From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: Rework probe() to get clock a bit later
  • From: carl peng <carlpeng008@xxxxxxxxx>
• Re: [PATCH v4] i2c: designware: Add support for AMD i2c controller
  • From: carl peng <carlpeng008@xxxxxxxxx>
• Re: [PATCH] i2c-mxs: detect No Slave Ack on SELECT in PIO mode
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] i2c designware add support of I2C standard mode
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v4 5/5] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v4 4/5] mfd: cros_ec: move locking into cros_ec_cmd_xfer
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v4 3/5] mfd: cros_ec: stop calling ->cmd_xfer() directly
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v4 2/5] i2c: i2c-cros-ec-tunnel: Set retries to 3
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v4 1/5] mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v4 0/5] Second batch of cleanups for cros_ec
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: i2c-core.ko renamed to i2ccore.ko
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: i2c-core.ko renamed to i2ccore.ko
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• i2c-core.ko renamed to i2ccore.ko
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: autoload i2c-dev module when needed
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: algos: add support for sc18im700 master i2c bus with uart interface
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/2] i2c: designware: Add support for AMD I2C controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: designware: Rework probe() to get clock a bit later
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: Add support for AMD i2c controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• RE: [PATCH v2] i2c: imx: Add arbitration lost check
  • From: "Haibo.Chen@xxxxxxxxxxxxx" <Haibo.Chen@xxxxxxxxxxxxx>
• Re: About RK3288 i2c scl duty cycle
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: About RK3288 i2c scl duty cycle
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 5/6] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v4] i2c: designware: Add support for AMD i2c controller
  • From: Carl Peng <carlpeng008@xxxxxxxxx>
• Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: "Li, Aubrey" <aubrey.li@xxxxxxxxxxxxxxx>
• I2c modifications for IPMI operations at panic time
  • From: Corey Minyard <cminyard@xxxxxxxxxx>
• Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 0/2] Amlogic Meson I2C driver
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• [PATCH 2/2] i2c: meson: add device tree bindings documentation
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• [PATCH 1/2] i2c: add support for Amlogic Meson I2C controller
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c-ismt: use correct length when copy buffer
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c-ismt: Use minimum descriptor size
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: Add support for AMD i2c controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c-ismt: use correct length when copy buffer
  • From: Fan Du <fan.du@xxxxxxxxx>
• [PATCH 1/2] i2c-ismt: Use minimum descriptor size
  • From: Fan Du <fan.du@xxxxxxxxx>
• [PATCH 0/2] Small fix with i2c-ismt driver
  • From: Fan Du <fan.du@xxxxxxxxx>
• Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 0/2] i2c: Add i2c support for Exynos7 SoC
  • From: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
• [PATCH 1/2] i2c: exynos: add support for HSI2C module on Exynos7
  • From: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
• [PATCH 2/2] i2c: exynos5: Add Kconfig dependencies
  • From: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
• Re: [PATCH RESEND 0/8] i2c: Relax mandatory I2C ID table passing
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH v3] i2c: designware: Add support for AMD i2c controller
  • From: Carl Peng <carlpeng008@xxxxxxxxx>
• ability to activate i2c-mux-gpio from user-space
  • From: Srikanth Krishnamachary <srikanth.krishnamachary@xxxxxxxxx>
• Re: [PATCH RESEND 0/8] i2c: Relax mandatory I2C ID table passing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH resend 0/2] i2c: hix5hd2: add i2c controller driver
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
• Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• requesting modules in the i2c-core in case of OF
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH v2] i2c-designware: Add suport for AMD i2c controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-designware: Add suport for AMD i2c controller
  • From: carl peng <carlpeng008@xxxxxxxxx>
• Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: Maxime Coquelin <maxime.coquelin@xxxxxx>
• [PATCH] i2c-rcar: check for no IRQ in rcar_i2c_irq()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c-rcar: make rcar_i2c_irq_recv() *void*
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] i2c-rcar: make rcar_i2c_prepare_msg() *void*
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] i2c-rcar: simplify check for last message
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/3] R-Car I2C driver: some cleanups
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: Peter Hüwe <PeterHuewe@xxxxxx>
• [PATCH] [REGRESSION] i2c-acpi: Fix NULL Pointer dereference
  • From: Peter Huewe <peterhuewe@xxxxxx>
• [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support
  • From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND 0/8] i2c: Relax mandatory I2C ID table passing
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Continue probing for auxiliary SMBus without main
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 6/8] i2c: Provide a temporary .probe2() call-back type
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND 0/8] i2c: Relax mandatory I2C ID table passing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/8] i2c: Add the ability to match device to compatible string without an of_node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 0/4] i2c: slave support framework for Linux devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [RFC 0/4] i2c: slave support framework for Linux devices
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: [RFC 0/4] i2c: slave support framework for Linux devices
  • From: Marc Dietrich <marvin24@xxxxxx>
• [PATCH RFC] i2c: report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v3 4/6] mfd: cros_ec: move locking into cros_ec_cmd_xfer
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v3 6/6] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v3 5/6] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v3 3/6] mfd: cros_ec: stop calling ->cmd_xfer() directly
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v3 2/6] i2c: i2c-cros-ec-tunnel: Set retries to 3
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v3 1/6] mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v3 0/6] Second batch of cleanups for cros_ec
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: detect No Slave Ack on SELECT in PIO mode
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH] i2c-mxs: detect No Slave Ack on SELECT in PIO mode
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• RE: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-mxs: fixed PIO NACK error instead of timeout (1000ms)
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v4 0/3] mfd: add support for Diolan DLN-2
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [RFC 2/4] i2c: slave: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c-mxs: fixed PIO NACK error instead of timeout (1000ms)
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH] i2c-mxs: fixed error message in pio transfer
  • From: Janusz Uzycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• [RFC 2/4] i2c: slave: add eeprom simulator driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 3/4] i2c: rcar: add slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 0/4] i2c: slave support framework for Linux devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 1/4] i2c: core changes for slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 4/4] ARM: shmobile: r8a7790: adapt DTS for I2C slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] i2c-mxs: fixed error message in pio transfer
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v4 5/9] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v3 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c-mxs: fixed error message in pio transfer
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] i2c-mxs: debug error message: second SELECT -> READ
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 2/2] i2c-mxs: fixed PIO NACK error instead of timeout
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• [PATCH 1/2] i2c-mxs: debug error message: second SELECT -> READ
  • From: Janusz Użycki <j.uzycki@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v3 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 6/7] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix divisor calculation for SCL frequency
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2] i2c: rk3x: fix divisor calculation for SCL frequency
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• [PATCH] i2c-rcar: fix RCAR_IRQ_ACK_{RECV|SEND}
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 3.17
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v3 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 1/2] i2c / ACPI: Create device on a valid first address
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] i2c/acpi: Support for multiple serial bus addresses
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c / ACPI: Add support for extracting multiple I2C addresses
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix divisor calculation for SCL frequency
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v3 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v3 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v3 0/3] mfd: add support for Diolan DLN-2
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH] i2c: Add generic support passing secondary devices addresses
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
• RE: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c: rk3x: fix divisor calculation for SCL frequency
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-designware: Add suport for AMD i2c controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Mikko Perttunen <cyndis@xxxxxxxx>
• Re: [PATCH v2] i2c-designware: Add suport for AMD i2c controller
  • From: carl peng <carlpeng008@xxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix divisor calculation for SCL frequency
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: rk3x: fix divisor calculation for SCL frequency
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v3 5/9] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2] i2c-designware: Add suport for AMD i2c controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c-designware: Add suport for AMD i2c controller
  • From: Carl Peng <carlpeng008@xxxxxxxxx>
• Re: [PATCH v2 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 6/7] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH v2 7/7] Input: cros_ec_keyb: Optimize ghosting algorithm.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2] i2c: imx: Add arbitration lost check
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH 1/1] i2c: designware: add support of platform data to set I2C mode
  • From: Raymond Tan <raymond.tan@xxxxxxxxx>
• [PATCH 0/1] i2c: designware: Add support for Intel Quark X1000
  • From: Raymond Tan <raymond.tan@xxxxxxxxx>
• Re: [PATCH 08/11] i2c: rcar: remove spinlock
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 08/11] i2c: rcar: remove spinlock
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-rcar: fix MNR interrupt handling
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] WIP: sketch of an slave-eeprom simulator
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/3] WIP: adapt dts for i2c slave use
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/3] WIP: i2c core changes for slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/3] WIP: i2c slave support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Trickle charging for rtc-bq32k
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c:at91: Fix a race condition during signal handling in at91_do_twi_xfer.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: Add arbitration lost check
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: mv64xxx: continue probe when clock-frequency is missing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-rcar: fix MNR interrupt handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH] i2c: imx: Add arbitration lost check
  • From: "fugang.duan@xxxxxxxxxxxxx" <fugang.duan@xxxxxxxxxxxxx>
• [PATCH] i2c-rcar: fix MNR interrupt handling
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2] i2c: mv64xxx: continue probe when clock-frequency is missing
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v2 2/2] adv7604: Use DT parsing in dummy creation
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] i2c:at91: Fix a race condition during signal handling in at91_do_twi_xfer.
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH] i2c: imx: Add arbitration lost check
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 2/2] adv7604: Use DT parsing in dummy creation
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2 0/3] mfd: add support for Diolan DLN-2
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH v2 1/2] Allow DT parsing of secondary devices
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 2/2] adv7604: Use DT parsing in dummy creation
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 1/2] Allow DT parsing of secondary devices
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 2/2] adv7604: Use DT parsing in dummy creation
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
• [PATCH v2 1/2] Allow DT parsing of secondary devices
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
• Re: [PATCH 2/2] adv7604: Use DT parsing in dummy creation
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/2] adv7604: Use DT parsing in dummy creation
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 2/2] adv7604: Use DT parsing in dummy creation
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
• [PATCH 1/2] Allow DT parsing of secondary devices
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
• Re: ARM: shmobile: "i2c<m>" vs. "iic<n>" DT nodes and pinmux
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND 0/8] i2c: Relax mandatory I2C ID table passing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] i2c-designware: Add support for ACPI i2c device
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND 0/8] i2c: Relax mandatory I2C ID table passing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: Add support for ACPI i2c device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] gpio: add support for the Diolan DLN-2 USB-GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] i2c-designware: Add support for ACPI i2c device
  • From: Carl Peng <carlpeng008@xxxxxxxxx>
• [PATCH] i2c-designware: Add support for ACPI i2c device
  • From: Carl Peng <carlpeng008@xxxxxxxxx>
• [PATCH RESEND 0/8] i2c: Relax mandatory I2C ID table passing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/8] i2c: Add pointer dereference protection to i2c_match_id()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 4/8] i2c: Make I2C ID tables non-mandatory for DT'ed devices
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 3/8] i2c: Match using traditional OF methods, then by vendor-less compatible strings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 6/8] i2c: Provide a temporary .probe2() call-back type
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 5/8] i2c: Export i2c_match_id() for direct use by device drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 7/8] mfd: 88pm860x: Move over to new I2C device .probe() call
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/8] i2c: Add the ability to match device to compatible string without an of_node
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 5/9] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [RFC, RESEND] i2c-smbus: smbus alert revisited
  • From: Alan <gnomes@xxxxxxxxxxxxxxxxxxx>
• Re: Implementing bus recovery
  • From: Simon Lindgren <simon@xxxxxxxxxx>
• Re: Implementing bus recovery
  • From: Mark Roszko <mark.roszko@xxxxxxxxx>
• [PATCH] i2c:at91: Fix a race condition during signal handling in at91_do_twi_xfer.
  • From: Simon Lindgren <simon@xxxxxxxxxx>
• [PATCH 5/9] i2c: core: Convert to dev_pm_domain_attach|detach()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 0/7] Second batch of cleanups for cros_ec
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH resend 2/2] i2c: hix5hd2: add i2c controller driver
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
• [PATCH resend 1/2] i2c: hix5hd2: add devicetree documentation
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
• [PATCH resend 0/2] i2c: hix5hd2: add i2c controller driver
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
• Re: [PATCH v2 0/7] Second batch of cleanups for cros_ec
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 0/7] Second batch of cleanups for cros_ec
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] Second batch of cleanups for cros_ec
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: continue probe when clock-frequency is missing
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: continue probe when clock-frequency is missing
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH] i2c: mv64xxx: continue probe when clock-frequency is missing
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2 7/7] Input: cros_ec_keyb: Optimize ghosting algorithm.
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 6/7] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 4/7] mfd: cros_ec: move locking into cros_ec_cmd_xfer
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 3/7] mfd: cros_ec: stop calling ->cmd_xfer() directly
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 2/7] i2c: i2c-cros-ec-tunnel: Set retries to 3
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 1/7] mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH v2 0/7] Second batch of cleanups for cros_ec
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH] i2c: axxia: Add I2C driver for AXM55xx
  • From: Anders Berg <anders.berg@xxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Implementing bus recovery
  • From: Simon Lindgren <simon@xxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] Revert "i2c: rcar: remove spinlock"
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] Revert "i2c-rcar: remove spinlock"
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] i2c: Relax mandatory I2C ID table passing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 08/11] i2c: rcar: remove spinlock
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Implementing bus recovery
  • From: Mark Roszko <mark.roszko@xxxxxxxxx>
• Re: [PATCH 08/11] i2c: rcar: remove spinlock
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Implementing bus recovery
  • From: Simon Lindgren <simon@xxxxxxxxxx>
• Re: [PATCH v4] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• [PATCH] i2c: rk3x: Remove unlikely() annotations
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Trickle charging for rtc-bq32k
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Trickle charging for rtc-bq32k
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/3] i2c-rcar: make rcar_i2c_irq_recv() *void*
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] i2c-rcar: make rcar_i2c_prepare_msg() *void*
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] i2c-rcar: simplify check for last message
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] R-Car I2C driver: some cleanups
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Trickle charging for rtc-bq32k
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RESEND PATCH 6/7] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] I2C: EMMA Mobile I2C master driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix bug that cause transfer fails in maste receive mode
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: add support for Diolan DLN-2 devices
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• [PATCH v2] i2c: rk3x: fix bug that cause transfer fails in maste receive mode
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: ARM: shmobile: "i2c<m>" vs. "iic<n>" DT nodes and pinmux
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: ARM: shmobile: "i2c<m>" vs. "iic<n>" DT nodes and pinmux
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Max Schwarz <max.schwarz@xxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: rk3x: fix bug that cause transfer fails in master receive mode
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH 6/7] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH 4/7] mfd: cros_ec: move locking into cros_ec_cmd_xfer
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH 3/7] mfd: cros_ec: stop calling ->cmd_xfer() directly
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH 1/7] mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 1/7] mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH 4/7] mfd: cros_ec: move locking into cros_ec_cmd_xfer
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: add support for Diolan DLN-2 devices
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] extcon: sm5502: EXTCON_SM5502 should depend on I2C
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] extcon: sm5502: EXTCON_SM5502 should depend on I2C
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: Re: [PATCH 2/2] extcon: sm5502: EXTCON_SM5502 should depend on I2C
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• [PULL REQUEST] i2c for 3.17
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] extcon: sm5502: EXTCON_SM5502 should depend on I2C
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes
  • From: Marek Roszko <mark.roszko@xxxxxxxxx>
• Re: [RESEND PATCH 4/7] mfd: cros_ec: move locking into cros_ec_cmd_xfer
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RESEND PATCH 3/7] mfd: cros_ec: stop calling ->cmd_xfer() directly
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: add support for Diolan DLN-2 devices
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC] i2c-smbus: smbus alert revisited
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] i2c: Relax mandatory I2C ID table passing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] i2c designware add support of I2C standard mode
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Romain Baeriswyl <Romain.Baeriswyl@xxxxxxxxxx>
• Re: [PATCH] i2c designware add support of I2C standard mode
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c designware add support of I2C standard mode
  • From: Romain Baeriswyl <Romain.Baeriswyl@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RESEND PATCH 7/7] Input: cros_ec_keyb: Optimize ghosting algorithm.
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [RESEND PATCH 6/7] mfd: cros_ec: Instantiate sub-devices from device tree
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [RESEND PATCH 5/7] mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [RESEND PATCH 3/7] mfd: cros_ec: stop calling ->cmd_xfer() directly
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [RESEND PATCH 4/7] mfd: cros_ec: move locking into cros_ec_cmd_xfer
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [RESEND PATCH 2/7] i2c: i2c-cros-ec-tunnel: Set retries to 3
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [RESEND PATCH 1/7] mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [RESEND PATCH 0/7] Second batch of cleanups for cros_ec
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Romain Baeriswyl <Romain.Baeriswyl@xxxxxxxxxx>
• [PATCH 0/3] dln-2: Add support for Diolan DLN-2 devices
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH 3/3] gpio: add support for the Diolan DLN-2 USB-GPIO driver
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH 1/3] usb: add support for Diolan DLN-2 devices
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Romain Baeriswyl <Romain.Baeriswyl@xxxxxxxxxx>
• Re: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: device tree bindings for i2c speed mode
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/2] i2c: designware: device tree bindings for i2c speed mode
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• RE: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: "Li.Xiubo@xxxxxxxxxxxxx" <Li.Xiubo@xxxxxxxxxxxxx>
• RE: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: "fugang.duan@xxxxxxxxxxxxx" <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: device tree bindings for i2c speed mode
  • From: atull <atull@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: deduce speed mode from device tree setting
  • From: <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: device tree bindings for i2c speed mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: designware: device tree bindings for i2c speed mode
  • From: <atull@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: designware: add speed mode device tree setting
  • From: <atull@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainer for ACPI parts of I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainer for ACPI parts of I2C
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: add maintainer for ACPI parts of I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Add PCI ID for Intel Braswell
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2] I2C: Rework kernel config I2C_ACPI
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: i801: Add PCI ID for Intel Braswell
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH/RFC V8 1/1] clk: Support for clock parents and rates assigned from device tree
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH V2] I2C: Rework kernel config I2C_ACPI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 1/2] regmap: Add eplicit dependencies to catch "select" misuse
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] regmap: Add eplicit dependencies to catch "select" misuse
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] extcon: sm5502: EXTCON_SM5502 should depend on I2C
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 1/2] regmap: Add eplicit dependencies to catch "select" misuse
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereference
  • From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH V2] I2C: Rework kernel config I2C_ACPI
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: i2c-tegra: Move clk_prepare/clk_set_rate to probe
  • From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
• Re: [PATCH V2] I2C: Rework kernel config I2C_ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH V2] I2C: Rework kernel config I2C_ACPI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• RE: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: "fugang.duan@xxxxxxxxxxxxx" <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: "fugang.duan@xxxxxxxxxxxxx" <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: Make I2C core able to be module when I2C_ACPI is selected.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: i2c access from kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: Fugang Duan <b38611@xxxxxxxxxxxxx>
• RE: [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: "fugang.duan@xxxxxxxxxxxxx" <fugang.duan@xxxxxxxxxxxxx>
• [PATCH] i2c: imx: double check IIF in case interrupt lost
  • From: Fugang Duan <b38611@xxxxxxxxxxxxx>
• i2c access from kernel
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH/RFC V8 1/1] clk: Support for clock parents and rates assigned from device tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/2] i2c: cadence: Remove .owner field for driver
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH 2/2] i2c: i2c-xiic: Remove .owner field for driver
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH v7 2/2] Documentation:add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v7 0/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v7 2/2] Documentation:add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• [PATCH v7 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] I2C: Make I2C core able to be module when I2C_ACPI is selected.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: ARM: shmobile: "i2c<m>" vs. "iic<n>" DT nodes and pinmux
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: Make I2C core able to be module when I2C_ACPI is selected.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] I2C: Make I2C core able to be module when I2C_ACPI is selected.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] I2C: Make I2C core able to be module when I2C_ACPI is selected.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: ARM: shmobile: "i2c<m>" vs. "iic<n>" DT nodes and pinmux
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: ARM: shmobile: "i2c<m>" vs. "iic<n>" DT nodes and pinmux
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• ARM: shmobile: "i2c<m>" vs. "iic<n>" DT nodes and pinmux
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH] I2C: Make I2C core able to be module when I2C_ACPI is selected.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] I2C/ACPI: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  • From: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
• [PATCH v1 1/2] i2c / ACPI: Create device on a valid first address
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] i2c / ACPI: Add support for extracting multiple I2C addresses
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v1 0/2] i2c/acpi: Support for multiple serial bus addresses
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH] I2C: Make I2C core able to be module when I2C_ACPI is selected.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for 3.17
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: ddc/ci over i2c
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: ddc/ci over i2c
  • From: Sanford Rockowitz <rockowitz@xxxxxxxxxxx>
• Re: ddc/ci over i2c
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: ddc/ci over i2c
  • From: Sanford Rockowitz <rockowitz@xxxxxxxxxxx>
• Re: [PATCH] i2c: qup: disable clks and return instead of just returning error
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 3.17
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: i2c: removal of s6000 driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 3.17
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/14] i2c: mpc: delete unneeded test before of_node_put
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix interrupt handling issue
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Advice on AT24MAC driver
  • From: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
• Re: [PATCH 1/14] i2c: mpc: delete unneeded test before of_node_put
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 1/14] i2c: mpc: delete unneeded test before of_node_put
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix interrupt handling issue
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 1/14] i2c: mpc: delete unneeded test before of_node_put
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH] i2c: rk3x: fix interrupt handling issue
  • From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
• Re: i2c-i801 driver quit working in 3.8.11
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: i2c-i801 driver quit working in 3.8.11
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: i2c-i801 driver quit working in 3.8.11
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: i2c-i801 driver quit working in 3.8.11
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Multiple devices with same SMBus address
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
• Re: i2c-i801 driver quit working in 3.8.11
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v6 1/2] i2c: imx: add DMA support for freescale i2c driver
  • From: "fugang.duan@xxxxxxxxxxxxx" <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] i2c: rcar: add renesas,i2c-rcar-gen1/gen2 in DT compatible
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxx>