Re: [PATCH] i2c designware add support of I2C standard mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 20 Aug 2014, Romain Baeriswyl wrote:

> From: Romain Baeriswyl <Romain.Baeriswyl@xxxxxxxxxx>
> 
> Some legacy devices support ony I2C standard mode at 100kHz.
> This patch allows to select the standard mode through the DTS
> with the use of the existing clock-frequency parameter.
> 
> When clock-frequency parameter is not set, the fast mode is selected.
> Only when the parameter is set at 100000, the standard mode is selected.
> 
> Signed-off-by: Romain Baeriswyl <romainba@xxxxxxxxxx>
> Reviewed-by: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-designware-platdrv.c |   23 +++++++++++++++++++++--
>  1 files changed, 21 insertions(+), 2 deletions(-)
> 

Hi Wolfram,

This patch is really useful for us.  Is it going to be picked up?

Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux