cc'ing: devicetree
Am Dienstag, 9. September 2014, 16:54:30 schrieb Wolfram Sang:
> From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
>
> Not for upstream!
>
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/r8a7790-lager.dts | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> b/arch/arm/boot/dts/r8a7790-lager.dts index 856b4236b674..12aa2f21e6fa
> 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -205,9 +205,9 @@
> renesas,function = "msiof1";
> };
>
> - iic1_pins: iic1 {
> - renesas,groups = "iic1";
> - renesas,function = "iic1";
> + i2c1_pins: i2c1 {
> + renesas,groups = "i2c1";
> + renesas,function = "i2c1";
> };
>
> iic2_pins: iic2 {
> @@ -356,10 +356,15 @@
> status = "ok";
> };
>
> -&iic1 {
> +&i2c1 {
> status = "ok";
> - pinctrl-0 = <&iic1_pins>;
> + pinctrl-0 = <&i2c1_pins>;
> pinctrl-names = "default";
> +
> + eeprom@64 {
> + compatible = "slave-24c02";
a "real" compatible value should have vendor,device syntax.
> + reg = <0x64>;
we had some discussions in the past how to represent i2c master devices in
device tree. The outcome was to use to a special representation to distinguish
them from slave devices, e.g. something like reg = <0x1 0x64>, where the 0x1
would mean "master" device (0x0 -> slave). If nothing is added, then it's also
slave. The adapter address cell would also need to be changed if this
extension is used.
An alternative would be to use a special property (e.g. slave address), but
that would encode the same value twice (or even three times).
Marc
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
