Linux Kernel I2C

• Thread Index

• Re: [PATCH] i2c: remove helpers for ref-counting clients
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 101/191] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 056/109] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] i2c: remove helpers for ref-counting clients
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: ismt: Add missed pci_release_region
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: Re: [PATCH v2] i2c: cadence: try reset when master receive arbitration lost
  • From: "sxauwsk@xxxxxxx" <sxauwsk@xxxxxxx>
• [PATCH AUTOSEL 4.19 095/205] i2c: mediatek: Use DMA safe buffers for i2c transactions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] i2c: core: fix use after free in of_i2c_notify
  • From: Wen Yang <wenyang@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 01/12] i2c: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: icy: no need to populate address for scanned device
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH 01/12] i2c: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 01/12] i2c: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH i2c-tools] tools: Load the i2c-dev kernel module when needed
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i801: Correct Intel Jasper Lake PCH naming
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v1] i2c: i801: Correct Intel Jasper Lake PCH naming
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 10/17] media: platform: sti: c8sectpfe: c8sectpfe-dvb: convert to use i2c_new_client_device()
  • From: Patrice CHOTARD <patrice.chotard@xxxxxx>
• Re: [RFC PATCH 05/12] video: fbdev: matrox: convert to i2c_new_scanned_device
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: Re: [PATCH v2] i2c: cadence: try reset when master receive arbitration lost
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxx>
• [PATCH 01/17] i2c: add helper to check if a client has a driver attached
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 00/17] media: use new API for creating client devices
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 04/17] media: dvb-frontends: lgdt330x: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/17] media: pci: smipcie: smipcie-main: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 06/17] media: dvb-frontends: ts2020: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 05/17] media: dvb-frontends: m88ds3103: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/17] media: dvb-frontends: cxd2820r_core: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 02/17] media: dvb-core: dvbdev: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 07/17] media: pci: cx23885: cx23885-dvb: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/17] media: platform: sti: c8sectpfe: c8sectpfe-dvb: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 11/17] media: usb: dvb-usb-v2: af9035: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 12/17] media: usb: dvb-usb-v2: anysee: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 13/17] media: usb: dvb-usb-v2: rtl28xxu: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 14/17] media: usb: dvb-usb-v2: zd1301: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 16/17] media: usb: dvb-usb: dw2102: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 15/17] media: usb: dvb-usb: dib0700_devices: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 17/17] media: v4l2-core: v4l2-i2c: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/17] media: pci: saa7164: saa7164-dvb: convert to use i2c_new_client_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: icy: no need to populate address for scanned device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: icy: no need to populate address for scanned device
  • From: Max Staudt <max@xxxxxxxxx>
• [PATCH] i2c: icy: no need to populate address for scanned device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 08/12] media: pci: cx88: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 01/12] i2c: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH 02/12] i2c: icy: convert to i2c_new_scanned_device
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH 12/12] media: v4l2-core: convert to i2c_new_scanned_device
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFC PATCH 10/12] media: pci: cx18: convert to i2c_new_scanned_device
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFC PATCH 11/12] media: pci: ivtv: convert to i2c_new_scanned_device
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFC PATCH 09/12] media: pci: bt8xx: convert to i2c_new_scanned_device
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFC PATCH 07/12] media: pci: cx23885: convert to i2c_new_scanned_device
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFC PATCH 08/12] media: pci: cx88: convert to i2c_new_scanned_device
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [RFC PATCH 00/12] i2c: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Sean Young <sean@xxxxxxxx>
• [RFC PATCH 00/12] i2c: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 01/12] i2c: replace i2c_new_probed_device with an ERR_PTR variant
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 04/12] platform: chrome: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 03/12] macintosh: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 06/12] input: mouse: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 07/12] media: pci: cx23885: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 08/12] media: pci: cx88: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 05/12] video: fbdev: matrox: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 09/12] media: pci: bt8xx: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 11/12] media: pci: ivtv: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 10/12] media: pci: cx18: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 12/12] media: v4l2-core: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 02/12] i2c: icy: convert to i2c_new_scanned_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: Re: [PATCH v2] i2c: cadence: try reset when master receive arbitration lost
  • From: "sxauwsk@xxxxxxx" <sxauwsk@xxxxxxx>
• Re: [PATCHv2] i2c: xiic: Fix kerneldoc warnings
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: try reset when master receive arbitration lost
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxx>
• Re: [PATCH] i2c: xiic: Fix kerneldoc warnings
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxx>
• [PATCHv2] i2c: xiic: Fix kerneldoc warnings
  • From: shubhrajyoti.datta@xxxxxxxxx
• Re: [PATCH] i2c: xiic: Fix kerneldoc warnings
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH] i2c: hix5hd2: add missed clk_disable_unprepare in remove
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [v4] i2c: imx: support slave mode for imx I2C driver
  • From: Biwen Li <biwen.li@xxxxxxx>
• [PATCH] i2c: qcom-geni: fix spelling mistake "unepxected" -> "unexpected"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH v2] i2c: imx-lpi2c: add clk_disable_unprepare calls
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH resend] i2c: core: Use DEVICE_ATTR_RW() helper macros
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH] i2c: xiic: Fix kerneldoc warnings
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH] i2c: imx-lpi2c: add clk_disable_unprepare calls
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 34/38] i2c: stm32f7: remove warning when compiling with W=1
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 32/38] i2c: stm32f7: fix first byte to send in slave mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 21/24] i2c: stm32f7: remove warning when compiling with W=1
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 33/38] i2c: stm32f7: fix a race in slave mode with arbitration loss irq
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 63/81] i2c: aspeed: fix master pending state handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: i2c: at91: document optional bus recovery properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: meson: convert to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [EXT] Re: [RESEND v2] i2c: imx: support slave mode for imx I2C driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH][RESEND] New driver for TLV493D-A1B6 I2C chip, input and hwmon class device.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [v3] i2c: imx: support slave mode for imx I2C driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: meson: convert to yaml
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: meson: convert to yaml
  • From: Beniamino Galvani <b.galvani@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.4
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH RFC] i2c: bcm2835: Store pointer to bus clock
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 5.4
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH RFC] i2c: bcm2835: Store pointer to bus clock
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: report dma error during probe
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix & reorder remove & probe error handling
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH] i2c: i2c-stm32f7: fix & reorder remove & probe error handling
  • From: Alain Volmat <alain.volmat@xxxxxx>
• [PATCH resend] i2c: core: Use DEVICE_ATTR_RW() helper macros
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• [v3] i2c: imx: support slave mode for imx I2C driver
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• RE: [EXT] Re: [RESEND v2] i2c: imx: support slave mode for imx I2C driver
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [v5,1/3] dt-bindings: i2c: support property idle-state
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 3/5] i2c: at91: implement i2c bus recovery
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v2 5/5] ARM: at91/dt: sama5d4: add i2c gpio pinctrl
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v2 4/5] ARM: at91/dt: sama5d3: add i2c gpio pinctrl
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v2 1/5] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: i2c: at91: document optional bus recovery properties
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH v2 0/5] Add i2c bus recovery support for Atmel SoCs
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: meson: convert to yaml
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-stm32f7: remove warning when compiling with W=1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: rework slave_id allocation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Add support for Intel Comet Lake PCH-H
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Add support for Intel Jasper Lake
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: muxes: pca9541: use BIT() macro
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Add support for Intel Comet Lake PCH-H
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Add support for Intel Jasper Lake
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• [PATCH] i2c: i2c-stm32f7: report dma error during probe
  • From: Alain Volmat <alain.volmat@xxxxxx>
• [PATCH 2/2] i2c: i801: Add support for Intel Comet Lake PCH-H
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: i801: Add support for Intel Jasper Lake
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v7] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• [PATCH v6] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• RE: [PATCH v5 1/2] i2c: i2c-mlx: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH v6 1/2] i2c: i2c-mlx: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH v6 0/2] i2c: added driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH v6 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v6 3/9] i2c: add support for filters optional properties
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH v6] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: [PATCH v6] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v6] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: rework slave_id allocation
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v2] i2c: i2c-stm32f7: remove warning when compiling with W=1
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH v5] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [v5,2/3] i2c: mux: pca954x: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• [v5,3/3] arm64: dts: fsl-ls208xa-rdb: fix an errata E-00013
  • From: Biwen Li <biwen.li@xxxxxxx>
• [v5,1/3] dt-bindings: i2c: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [v4,2/2] i2c: mux: pca954x: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH i2c-next 2/2] i2c: aspeed: add slave inactive timeout support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: add hardware timeout support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next 0/2] i2c: aspeed: Add H/W timeout support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v5 3/9] i2c: add support for filters optional properties
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: meson: convert to yaml
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix first byte to send in slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix a race in slave mode with arbitration loss irq
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v4,2/2] i2c: mux: pca954x: support property idle-state
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: Aspeed: Add AST2600 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: Aspeed: Add AST2600 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND v2] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [v4,2/2] i2c: mux: pca954x: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• [v4,1/2] dt-bindings: i2c: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [v3,2/2] i2c: mux: pca954x: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: AST2600 i2c irq issue
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH][RESEND] New driver for TLV493D-A1B6 I2C chip, input and hwmon class device.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH][RESEND] New driver for TLV493D-A1B6 I2C chip, input and hwmon class device.
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH][RESEND] New driver for TLV493D-A1B6 I2C chip, input and hwmon class device.
  • From: Jakub Ladman <ladmanj@xxxxxxxx>
• [PATCH RESEND v2] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] docs: i2c: Fix SPDX-License-Identifier syntax
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH v4] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• [PATCH v2] dt-binding: eeprom: at24: add supply properties
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: AST2600 i2c irq issue
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• Re: [v3,1/2] dt-bindings: i2c: support property idle-state
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [v3,2/2] i2c: mux: pca954x: support property idle-state
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [v3,1/2] dt-bindings: i2c: support property idle-state
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [v3,1/2] dt-bindings: i2c: support property idle-state
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1] dt-binding: eeprom: at24: add supply properties
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• AST2600 i2c irq issue
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v3] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3] misc: eeprom: at24: support pm_runtime control
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v1] dt-binding: eeprom: at24: add supply properties
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v1] dt-binding: eeprom: at24: add supply properties
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• [PATCH v3] misc: eeprom: at24: support pm_runtime control
  • From: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
• [v3,2/2] i2c: mux: pca954x: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• [v3,1/2] dt-bindings: i2c: support property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [v2,1/2] dt-bindings: i2c: add property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [v2,2/2] i2c: mux: pca954x: add property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [PATCH 0/4] i2c bus recovery for Microchip SoCs.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [v2,1/2] dt-bindings: i2c: add property idle-state
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [v2,2/2] i2c: mux: pca954x: add property idle-state
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2] i2c: i2c-stm32f7: remove warning when compiling with W=1
  • From: Alain Volmat <alain.volmat@xxxxxx>
• [PATCH] i2c: i2c-stm32f7: rework slave_id allocation
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix a race in slave mode with arbitration loss irq
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix first byte to send in slave mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [v2,2/2] i2c: mux: pca954x: add property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• [v2,1/2] dt-bindings: i2c: add property idle-state
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [PATCH 2/2] i2c: mux: pca954x: replace property i2c-mux-idle-disconnect
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [RFC PATCH 3/3] i2c: imx: implement master_xfer_atomic callback
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 4/4] i2c: i801: Instantiate SPD EEPROMs automatically
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/2] i2c: mux: pca954x: replace property i2c-mux-idle-disconnect
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] Re: i2c: core: introduce atomic transfers
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] i2c: smbus: Add a way to instantiate SPD EEPROMs automatically
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect
  • From: Biwen Li <biwen.li@xxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect
  • From: Biwen Li <biwen.li@xxxxxxx>
• [PATCH 2/2] i2c: mux: pca954x: replace property i2c-mux-idle-disconnect
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [RESEND v2] i2c: imx: support slave mode for imx I2C driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] i2c: smbus: Add a way to instantiate SPD EEPROMs automatically
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/4] i2c: i801: Instantiate SPD EEPROMs automatically
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 4/4] i2c: i801: Instantiate SPD EEPROMs automatically
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 3/4] i2c: smbus: Add a way to instantiate SPD EEPROMs automatically
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 2/4] firmware: dmi: Add dmi_memdev_handle
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 1/4] firmware: dmi: Remember the memory type
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 0/4] Instantiate SPD EEPROMs at boot on x86
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [EXT] Re: [v2,2/2] dt-bindings: i2c-mux-pca954x: Add optional property i2c-mux-never-disable
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [EXT] Re: [v2,2/2] dt-bindings: i2c-mux-pca954x: Add optional property i2c-mux-never-disable
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• RE: [EXT] Re: [v2,2/2] dt-bindings: i2c-mux-pca954x: Add optional property i2c-mux-never-disable
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [v2,2/2] dt-bindings: i2c-mux-pca954x: Add optional property i2c-mux-never-disable
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [RFC PATCH 0/3] Re: i2c: core: introduce atomic transfers
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: i2c-aspeed testing with kunit fake and syzkaller
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: dev: Fix the race between the release of i2c_dev and cdev
  • From: Kevin Hao <haokexin@xxxxxxxxx>
• Re: [v2,2/2] dt-bindings: i2c-mux-pca954x: Add optional property i2c-mux-never-disable
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [PATCH RESEND] gpu: drm: bridge: analogix-anx78xx: convert to i2c_new_dummy_device
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH RESEND] gpu: drm: bridge: sii9234: convert to devm_i2c_new_dummy_device
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Tao Ren <taoren@xxxxxx>
• Re: i2c-aspeed testing with kunit fake and syzkaller
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fix master pending state handling
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v6 2/2] dt-bindings: at24: add new compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: at24: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] ARM: dts: aspeed: add I2C buffer mode support
  • From: Cédric Le Goater <clg@xxxxxxxx>
• [RESEND v2] i2c: imx: support slave mode for imx I2C driver
  • From: Biwen Li <biwen.li@xxxxxxx>
• [v2] i2c: imx: support slave mode for imx I2C driver
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [PATCH RESEND] gpu: drm: bridge: sii9234: convert to devm_i2c_new_dummy_device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND] gpu: drm: bridge: analogix-anx78xx: convert to i2c_new_dummy_device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: i2c-aspeed testing with kunit fake and syzkaller
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: i2c-aspeed testing with kunit fake and syzkaller
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 4/5] i2c: aspeed: add buffer mode transfer support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: i2c-aspeed testing with kunit fake and syzkaller
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH 4/5] i2c: aspeed: add buffer mode transfer support
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Tao Ren <taoren@xxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] i2c: aspeed: add buffer mode transfer support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH RESEND] gpu: drm: bridge: sii9234: convert to devm_i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND] gpu: drm: bridge: analogix-anx78xx: convert to i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH 4/5] i2c: aspeed: add buffer mode transfer support
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: aspeed: add buffer and DMA mode transfer support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: aspeed: add buffer and DMA mode transfer support
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [RFCv3] i2c: hold the core_lock for the whole execution of i2c_register_adapter()
  • From: Slawomir Stepien <sst@xxxxxxxxx>
• i2c-aspeed testing with kunit fake and syzkaller
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• [RFCv2] i2c: hold the core_lock for the whole execution of i2c_register_adapter()
  • From: "Stepien, Slawomir (Nokia - PL/Wroclaw)" <slawomir.stepien@xxxxxxxxx>
• [PATCH 5/5] i2c: aspeed: add DMA mode transfer support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH 4/5] i2c: aspeed: add buffer mode transfer support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH 3/5] i2c: aspeed: fix master pending state handling
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH 2/5] ARM: dts: aspeed: add I2C buffer mode support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: i2c: aspeed: add buffer and DMA mode transfer support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH 0/5] i2c: aspeed: Add buffer and DMA modes support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: remove warning when compiling with W=1
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: remove warning when compiling with W=1
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH 2/2] docs: w1: Fix SPDX-License-Identifier syntax
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH 1/2] docs: i2c: Fix SPDX-License-Identifier syntax
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c: i2c-stm32f7: remove warning when compiling with W=1
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Improve confusing log message
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Improve confusing log message
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] eeprom: at24: Improve confusing log message
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: at91/dt: sama5d4: add i2c gpio pinctrl
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH 3/4] ARM: at91/dt: sama5d3: add i2c gpio pinctrl
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH 2/4] i2c: at91: implement i2c bus recovery
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: at91: document optional bus recovery properties
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• [PATCH 0/4] i2c bus recovery for Microchip SoCs.
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Bring back Block Process Call support for certain platforms
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Ulrich Hecht <uli@xxxxxxxx>
• [PATCH v6 1/2] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 2/2] dt-bindings: at24: add new compatible
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 0/2] at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/2] i2c: slave-eeprom: initialize empty eeprom properly
  • From: Bjorn Ardo <bjorn.ardo@xxxxxxxx>
• Re: [PATCH 1/2] i2c: pxa: migrate to new i2c_slave APIs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: pxa: migrate to new i2c_slave APIs
  • From: Patrick Williams <alpawi@xxxxxxxxxx>
• [PATCH 2/2] i2c: slave-eeprom: support additional models
  • From: Patrick Williams <alpawi@xxxxxxxxxx>
• [PATCH 1/2] i2c: slave-eeprom: initialize empty eeprom properly
  • From: Patrick Williams <alpawi@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 58/71] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 51/63] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: pxa: migrate to new i2c_slave APIs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: pxa: remove unused i2c-slave APIs
  • From: Patrick Williams <alpawi@xxxxxxxxxx>
• [PATCH 1/2] i2c: pxa: migrate to new i2c_slave APIs
  • From: Patrick Williams <alpawi@xxxxxxxxxx>
• [PATCH 0/2] i2c: pxa: migrate to i2c-core-slave APIs
  • From: Patrick Williams <alpawi@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: at24: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix a race in slave mode with arbitration loss irq
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH] i2c: i2c-stm32f7: fix a race in slave mode with arbitration loss irq
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: fix first byte to send in slave mode
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v2] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Cengiz Can <cengiz@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: Aspeed: Add AST2600 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH] i2c: i2c-stm32f7: fix first byte to send in slave mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v5 0/2] at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v5 2/2] dt-bindings: at24: add new compatible
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v5 1/2] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH] i2c: pca954x: Add property to skip disabling PCA954x MUX device
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [v2,1/2] i2c: pca954x: Add property to skip disabling PCA954x MUX device
  • From: Biwen Li <biwen.li@xxxxxxx>
• [v2,2/2] dt-bindings: i2c-mux-pca954x: Add optional property i2c-mux-never-disable
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [PATCH] i2c: pca954x: Add property to skip disabling PCA954x MUX device
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [PATCH] i2c: pca954x: Add property to skip disabling PCA954x MUX device
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [PATCH] i2c: pca954x: Add property to skip disabling PCA954x MUX device
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.4
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH AUTOSEL 5.3 05/49] i2c-cht-wc: Fix lockdep warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 35/49] i2c: tegra: Move suspend handling to NOIRQ phase
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 05/42] i2c-cht-wc: Fix lockdep warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 03/23] i2c-cht-wc: Fix lockdep warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 04/33] i2c-cht-wc: Fix lockdep warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] i2c: pca954x: Add property to skip disabling PCA954x MUX device
  • From: Cengiz Can <cengiz@xxxxxxxxxx>
• [PATCH] i2c: pca954x: Add property to skip disabling PCA954x MUX device
  • From: Biwen Li <biwen.li@xxxxxxx>
• [PULL REQUEST] i2c for 5.4
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: riic: Clear NACK in tend isr
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Bring back Block Process Call support for certain platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: slave-eeprom: Add read only mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: at24: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4] dt-bindings: at24: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Bring back Block Process Call support for certain platforms
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• [PATCH] i2c: i801: Bring back Block Process Call support for certain platforms
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] i2c: riic: Clear NACK in tend isr
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• RE: [PATCH] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.4
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] i2c: riic: Clear NACK in tend isr
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH v3] dt-bindings: at24: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: i2c-mt65xx: fix NULL ptr dereference
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH] i2c: riic: Clear NACK in tend isr
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] i2c: busses: Convert parameter to __le32
  • From: Adam Zerella <adam.zerella@xxxxxxxxx>
• [PATCH v2] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.4
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PULL REQUEST] i2c for 5.4
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PULL REQUEST] i2c for 5.4
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH v1] misc: eeprom: at24: support pm_runtime control
  • From: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Biju Das <biju.das@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: at24: convert the binding document to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: at24: convert the binding document to yaml
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] dt-bindings: at24: convert the binding document to yaml
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] dt-bindings: at24: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [v2 0/3] Fix issues reported by Coccinelle
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [PATCH] i2c: busses: Convert parameter to __le32
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] i2c: busses: Convert parameter to __le32
  • From: Adam Zerella <adam.zerella@xxxxxxxxx>
• Re: [BUG] sun4i: axp209: no atomic i2c transfer handler
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: kbouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: linux-next: build failure after merge of the driver-core tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: linux-next: build failure after merge of the driver-core tree
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: linux-next: build failure after merge of the driver-core tree
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: linux-next: build failure after merge of the driver-core tree
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: linux-next: build failure after merge of the driver-core tree
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• linux-next: build failure after merge of the driver-core tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: qup: Remove dev_err() log after platform_get_irq*() failure
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [v2 0/3] Fix issues reported by Coccinelle
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [v2 0/3] Fix issues reported by Coccinelle
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v2 0/3] Fix issues reported by Coccinelle
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v2 0/3] Fix issues reported by Coccinelle
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH v2 3/3] i2c: qup: Use devm_platform_ioremap_resource helper
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH v2 2/3] i2c: qup: Remove dev_err() log after platform_get_irq*() failure
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH v2 1/3] i2c: qup: remove explicit conversion to boolean
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH v2] Fix issues reported by Coccinelle
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [3/3] i2c: qup: Use devm_platform_ioremap_resource helper
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: qup: Remove dev_err() log after platform_get_irq*() failure
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [1/3] i2c: qup: remove explicit conversion to boolean
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [3/3] i2c: qup: Use devm_platform_ioremap_resource helper
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 2/3] i2c: qup: Remove dev_err() log after platform_get_irq*() failure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [1/3] i2c: qup: remove explicit conversion to boolean
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v5 2/9] dt-bindings: i2c: add bindings for i2c analog and digital filter
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 2/2] of: Let of_for_each_phandle fallback to non-negative cell_count
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] of: Let of_for_each_phandle fallback to non-negative cell_count
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] of: Let of_for_each_phandle fallback to non-negative cell_count
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: core: remove #ifdef for CONFIG_X86
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: core: use IS_ENABLED for CONFIG_I2C_COMPAT
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH] i801_smbus: clear SMBALERT status bit and disable SMBALERT interrupt
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v1 2/2] of: Let of_for_each_phandle fallback to non-negative cell_count
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v1 2/2] of: Let of_for_each_phandle fallback to non-negative cell_count
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] of: Let of_for_each_phandle fallback to non-negative cell_count
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: qup: Use devm_platform_ioremap_resource helper
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH 2/3] i2c: qup: Remove dev_err() log after platform_get_irq*() failure
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH 1/3] i2c: qup: remove explicit conversion to boolean
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH 0/3] Fix issues reported by Coccinelle
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [PATCH] i801_smbus: clear SMBALERT status bit and disable SMBALERT interrupt
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] i801_smbus: clear SMBALERT status bit and disable SMBALERT interrupt
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/9] i2c: add support for filters
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: Aspeed: Add AST2600 compatible
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: Aspeed: Add AST2600 compatible
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: i2c: Aspeed: Add AST2600 compatible
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: Aspeed: Add AST2600 compatible
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 0/2] i2c: Aspeed: Add AST2600 compatible string
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Move suspend handling to NOIRQ phase
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v2] ACPI: support for NXP i2c controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: slave-eeprom: Add read only mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: bcm2835: Avoid clk stretch quirk for BCM2711
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [BACKPORT 4.14.y 03/18] drm/omap: panel-dsi-cm: fix driver
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH] i2c: at91: Send bus clear command if SCL or SDA is down
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [PATCH v5 9/9] ARM: dts: at91: sama5d4_xplained: add digital filter for i2c
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 6/9] i2c: at91: add support for advanced digital filtering
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 4/9] i2c: at91: add new platform support for sam9x60
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 2/9] dt-bindings: i2c: add bindings for i2c analog and digital filter
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 5/9] i2c: at91: add support for digital filtering
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 8/9] ARM: dts: at91: sama5d2_xplained: add analog and digital filter for i2c
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 7/9] i2c: at91: add support for analog filtering
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 3/9] i2c: add support for filters optional properties
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 0/9] i2c: add support for filters
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v5 1/9] dt-bindings: i2c: at91: add new compatible
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• RE: [v2] ACPI: support for NXP i2c controller
  • From: Biwen Li <biwen.li@xxxxxxx>
• RE: [EXT] Re: [v2] ACPI: support for NXP i2c controller
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: i2c: designware: multi master problem
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC,v2 3/6] media: dt-bindings: add DS90UB954-Q1 video deserializer
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BACKPORT 4.14.y 03/18] drm/omap: panel-dsi-cm: fix driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v2] i2c: i2c-amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: i2c: designware: multi master problem
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Move suspend handling to NOIRQ phase
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [RFC,v2 3/6] media: dt-bindings: add DS90UB954-Q1 video deserializer
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH] i2c: tegra: Move suspend handling to NOIRQ phase
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• i2c: designware: multi master problem
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: slave-eeprom: Make it possible to pre-load eeprom data
  • From: Björn Ardö <bjorn.ardo@xxxxxxxx>
• Re: [v2] ACPI: support for NXP i2c controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3] i2c: slave-eeprom: Add read only mode
  • From: Björn Ardö <bjorn.ardo@xxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Remove needless pci_set_master() call
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Remove needless pci_set_master() call
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Remove needless pci_set_master() call
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Remove needless pci_set_master() call
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Remove needless pci_set_master() call
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware-pci: Remove needless pci_set_master() call
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [v2] ACPI: support for NXP i2c controller
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [v2] ACPI: support for NXP i2c controller
  • From: Biwen Li <biwen.li@xxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: uniphier(-f): remove all dev_dbg()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: uniphier(-f): use devm_platform_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add read only mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add comment about address handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RESEND v3 1/1] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND v3 1/1] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] i2c: muxes: pca9541: use BIT() macro
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add read only mode
  • From: Björn Ardö <bjorn.ardo@xxxxxxxx>
• Re: [PATCH] i2c: muxes: pca9541: use BIT() macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [BACKPORT 4.14.y 00/18] Backport candidate from TI 4.14 product kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [BACKPORT 4.14.y 00/18] Backport candidate from TI 4.14 product kernel
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 02/18] PCI: dra7xx: Fix legacy INTD IRQ handling
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 03/18] drm/omap: panel-dsi-cm: fix driver
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 05/18] mfd: palmas: Assign the right powerhold mask for tps65917
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 06/18] ASoC: tlv320aic31xx: Handle inverted BCLK in non-DSP modes
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 07/18] mtd: spi-nor: enable 4B opcodes for mx66l51235l
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 08/18] mtd: spi-nor: cadence-quadspi: add a delay in write sequence
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 09/18] misc: pci_endpoint_test: Prevent some integer overflows
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 10/18] PCI: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 11/18] misc: pci_endpoint_test: Fix BUG_ON error during pci_disable_msi()
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 14/18] ASoC: davinci-mcasp: Handle return value of devm_kasprintf
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 12/18] mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 15/18] ASoC: davinci: Kill BUG_ON() usage
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 16/18] ASoC: davinci-mcasp: Fix an error handling path in 'davinci_mcasp_probe()'
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 13/18] ASoC: tlv320dac31xx: mark expected switch fall-through
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 18/18] cpufreq: ti-cpufreq: add missing of_node_put()
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 17/18] i2c: omap: Trigger bus recovery in lockup case
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 01/18] PCI: designware-ep: Fix find_first_zero_bit() usage
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add read only mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: muxes: pca9541: use BIT() macro
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• [PATCH v2] i2c-eeprom_slave: Add read only mode
  • From: Björn Ardö <bjorn.ardo@xxxxxxxx>
• RE: [PATCH] ACPI: support for NXP i2c controller
  • From: Biwen Li <biwen.li@xxxxxxx>
• [PATCH] i2c-eeprom_slave: Add read only mode
  • From: Björn Ardö <bjorn.ardo@xxxxxxxx>
• [PATCH] i2c-eeprom_slave: Add comment about address handling
  • From: Björn Ardö <bjorn.ardo@xxxxxxxx>
• [RESEND v3 1/1] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: i2c-amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add support for more eeprom models
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add support for more eeprom models
  • From: Bjorn Ardo <bjorn.ardo@xxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: muxes: pca9541: use BIT() macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] i2c: muxes: pca9541: use BIT() macro
  • From: Saiyam Doshi <saiyamdoshi.in@xxxxxxxxx>
• Re: [PATCH] i801_smbus: clear SMBALERT status bit and disable SMBALERT interrupt
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v3 1/1] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH] i801_smbus: clear SMBALERT status bit and disable SMBALERT interrupt
  • From: "Xu, Lingyan (NSB - CN/Hangzhou)" <lingyan.xu@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add support for more eeprom models
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: soc: qcom: Provide option to disable DMA
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: soc: qcom: Provide option to disable DMA
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 2/2] i2c: qcom-geni: Provide an option to disable DMA processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add support for more eeprom models
  • From: Bjorn Ardo <bjorn.ardo@xxxxxxxx>
• [PATCH] i2c: uniphier(-f): remove all dev_dbg()
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• RE: [PATCH] ACPI: support for NXP i2c controller
  • From: Biwen Li <biwen.li@xxxxxxx>
• [PATCH] i2c: uniphier(-f): use devm_platform_ioremap_resource()
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: exynos5: Remove IRQF_ONESHOT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: Make structure stm32f7_i2c_algo constant
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-eeprom_slave: Add support for more eeprom models
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 70/94] i2c: designware: Synchronize IRQs when unregistering slave client
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 43/52] i2c: designware: Synchronize IRQs when unregistering slave client
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 28/36] i2c: designware: Synchronize IRQs when unregistering slave client
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 74/94] i2c: mediatek: disable zero-length transfers for mt8183
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 73/94] i2c: iproc: Stop advertising support of SMBUS quick cmd
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] i2c-eeprom_slave: Add support for more eeprom models
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: soc: qcom: Provide option to select FIFO mode
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: soc: qcom: Provide option to select FIFO mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/2] i2c: qcom-geni: Provide an option to select FIFO processing
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2] i2c-eeprom_slave: Add support for more eeprom models
  • From: Björn Ardö <bjorn.ardo@xxxxxxxx>
• Re: [PATCH] i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC,v2 2/6] i2c: add I2C Address Translator (ATR) support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: Make structure stm32f7_i2c_algo constant
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH 1/2] i2c: exynos5: Remove IRQF_ONESHOT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: iproc: Add i2c repeated start capability
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH RESEND 3/3] hwmon: w83793d: convert to use devm_i2c_new_dummy_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND 2/3] hwmon: w83792d: convert to use devm_i2c_new_dummy_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND 1/3] hwmon: w83791d: convert to use devm_i2c_new_dummy_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND 0/3] hwmon: convert remaining drivers to i2c_new_dummy_device()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND 0/3] hwmon: convert remaining drivers to i2c_new_dummy_device()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: busses: i2c-fsi.c: Add of_put_node() before break
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: busses: i2c-fsi.c: Add of_put_node() before break
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: synquacer: Make synquacer_i2c_ops constant
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: synquacer: Make synquacer_i2c_ops constant
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] i2c: busses: i2c-fsi.c: Add of_put_node() before break
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH RESEND 1/3] hwmon: w83791d: convert to use devm_i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND 3/3] hwmon: w83793d: convert to use devm_i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND 2/3] hwmon: w83792d: convert to use devm_i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND 0/3] hwmon: convert remaining drivers to i2c_new_dummy_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: Make structure stm32f7_i2c_algo constant
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: synquacer: Make synquacer_i2c_ops constant
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: hix5hd2: Remove IRQF_ONESHOT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>