Some of the I2C bus drivers can be compile tested to increase build coverage. This requires also: 1. Adding dependencies on COMMON_CLK for BCM2835 and Meson I2C controllers, 2. Adding 'if' conditional to 'default y' so they will not get enabled by default on all other architectures, 3. Limiting few compile test options to supported architectures (which provide the readsX()/writesX() primitives). Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- drivers/i2c/busses/Kconfig | 62 ++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 30 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 6a0aa76859f3..acb1ba635397 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -367,7 +367,7 @@ comment "I2C system bus drivers (mostly embedded / system-on-chip)" config I2C_ALTERA tristate "Altera Soft IP I2C" - depends on (ARCH_SOCFPGA || NIOS2) && OF + depends on (ARCH_SOCFPGA || NIOS2 || COMPILE_TEST) && OF help If you say yes to this option, support will be included for the Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures. @@ -387,7 +387,7 @@ config I2C_ASPEED config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" - depends on ARCH_AT91 + depends on ARCH_AT91 || COMPILE_TEST help This supports the use of the I2C interface on Atmel AT91 processors. @@ -440,7 +440,8 @@ config I2C_AXXIA config I2C_BCM2835 tristate "Broadcom BCM2835 I2C controller" - depends on ARCH_BCM2835 || ARCH_BRCMSTB + depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST + depends on COMMON_CLK help If you say yes to this option, support will be included for the BCM2835 I2C controller. @@ -463,8 +464,8 @@ config I2C_BCM_IPROC config I2C_BCM_KONA tristate "BCM Kona I2C adapter" - depends on ARCH_BCM_MOBILE - default y + depends on ARCH_BCM_MOBILE || COMPILE_TEST + default y if ARCH_BCM_MOBILE help If you say yes to this option, support will be included for the I2C interface on the Broadcom Kona family of processors. @@ -511,7 +512,7 @@ config I2C_CPM config I2C_DAVINCI tristate "DaVinci I2C driver" - depends on ARCH_DAVINCI || ARCH_KEYSTONE + depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST help Support for TI DaVinci I2C controller driver. @@ -572,7 +573,7 @@ config I2C_DESIGNWARE_BAYTRAIL config I2C_DIGICOLOR tristate "Conexant Digicolor I2C driver" - depends on ARCH_DIGICOLOR + depends on ARCH_DIGICOLOR || COMPILE_TEST help Support for Conexant Digicolor SoCs (CX92755) I2C controller driver. @@ -611,8 +612,8 @@ config I2C_EMEV2 config I2C_EXYNOS5 tristate "Exynos5 high-speed I2C driver" - depends on ARCH_EXYNOS && OF - default y + depends on (ARCH_EXYNOS && OF) || COMPILE_TEST + default y if ARCH_EXYNOS help High-speed I2C controller on Exynos5 based Samsung SoCs. @@ -634,7 +635,7 @@ config I2C_GPIO_FAULT_INJECTOR config I2C_HIGHLANDER tristate "Highlander FPGA SMBus interface" - depends on SH_HIGHLANDER + depends on SH_HIGHLANDER || COMPILE_TEST help If you say yes to this option, support will be included for the SMBus interface located in the FPGA on various Highlander @@ -686,7 +687,7 @@ config I2C_IMX_LPI2C config I2C_IOP3XX tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" - depends on ARCH_IOP32X || ARCH_IXP4XX + depends on ARCH_IOP32X || ARCH_IXP4XX || COMPILE_TEST help Say Y here if you want to use the IIC bus controller on the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. @@ -726,6 +727,7 @@ config I2C_LPC2K config I2C_MESON tristate "Amlogic Meson I2C controller" depends on ARCH_MESON || COMPILE_TEST + depends on COMMON_CLK help If you say yes to this option, support will be included for the I2C interface on the Amlogic Meson family of SoCs. @@ -759,7 +761,7 @@ config I2C_MT7621 config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU + depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU || COMPILE_TEST help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. @@ -770,7 +772,7 @@ config I2C_MV64XXX config I2C_MXS tristate "Freescale i.MX28 I2C interface" - depends on SOC_IMX28 + depends on SOC_IMX28 || COMPILE_TEST select STMP_DEVICE help Say Y here if you want to use the I2C bus controller on @@ -799,7 +801,7 @@ config I2C_OCORES config I2C_OMAP tristate "OMAP I2C adapter" - depends on ARCH_OMAP || ARCH_K3 + depends on ARCH_OMAP || ARCH_K3 || COMPILE_TEST default y if MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes to this option, support will be included for the @@ -833,7 +835,7 @@ config I2C_PCA_PLATFORM config I2C_PMCMSP tristate "PMC MSP I2C TWI Controller" - depends on PMC_MSP + depends on PMC_MSP || COMPILE_TEST help This driver supports the PMC TWI controller on MSP devices. @@ -842,7 +844,7 @@ config I2C_PMCMSP config I2C_PNX tristate "I2C bus support for Philips PNX and NXP LPC targets" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST help This driver supports the Philips IP3204 I2C IP block master and/or slave controller @@ -863,7 +865,7 @@ config I2C_PUV3 config I2C_PXA tristate "Intel PXA2XX I2C adapter" - depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) + depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) || COMPILE_TEST help If you have devices in the PXA I2C bus, say yes to this option. This driver can also be built as a module. If so, the module @@ -933,7 +935,7 @@ config HAVE_S3C2410_I2C config I2C_S3C2410 tristate "S3C2410 I2C Driver" - depends on HAVE_S3C2410_I2C + depends on HAVE_S3C2410_I2C || COMPILE_TEST help Say Y here to include support for I2C controller in the Samsung SoCs. @@ -971,7 +973,7 @@ config I2C_SIMTEC config I2C_SIRF tristate "CSR SiRFprimaII I2C interface" - depends on ARCH_SIRF + depends on ARCH_SIRF || COMPILE_TEST help If you say yes to this option, support will be included for the CSR SiRFprimaII I2C interface. @@ -981,14 +983,14 @@ config I2C_SIRF config I2C_SPRD tristate "Spreadtrum I2C interface" - depends on I2C=y && ARCH_SPRD + depends on I2C=y && (ARCH_SPRD || COMPILE_TEST) help If you say yes to this option, support will be included for the Spreadtrum I2C interface. config I2C_ST tristate "STMicroelectronics SSC I2C support" - depends on ARCH_STI + depends on ARCH_STI || COMPILE_TEST help Enable this option to add support for STMicroelectronics SoCs hardware SSC (Synchronous Serial Controller) as an I2C controller. @@ -1019,7 +1021,7 @@ config I2C_STM32F7 config I2C_STU300 tristate "ST Microelectronics DDC I2C interface" - depends on MACH_U300 + depends on MACH_U300 || COMPILE_TEST default y if MACH_U300 help If you say yes to this option, support will be included for the @@ -1055,15 +1057,15 @@ config I2C_SYNQUACER config I2C_TEGRA tristate "NVIDIA Tegra internal I2C controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC)) help If you say yes to this option, support will be included for the I2C controller embedded in NVIDIA Tegra SOCs config I2C_TEGRA_BPMP tristate "NVIDIA Tegra BPMP I2C controller" - depends on TEGRA_BPMP - default y + depends on TEGRA_BPMP || COMPILE_TEST + default y if TEGRA_BPMP help If you say yes to this option, support will be included for the I2C controller embedded in NVIDIA Tegra SoCs accessed via the BPMP. @@ -1101,7 +1103,7 @@ config I2C_VERSATILE config I2C_WMT tristate "Wondermedia WM8xxx SoC I2C bus support" - depends on ARCH_VT8500 + depends on ARCH_VT8500 || COMPILE_TEST help Say yes if you want to support the I2C bus on Wondermedia 8xxx-series SoCs. @@ -1142,7 +1144,7 @@ config I2C_XILINX config I2C_XLR tristate "Netlogic XLR and Sigma Designs I2C support" - depends on CPU_XLR || ARCH_TANGO + depends on CPU_XLR || ARCH_TANGO || COMPILE_TEST help This driver enables support for the on-chip I2C interface of the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs. @@ -1328,7 +1330,7 @@ config I2C_ICY config I2C_MLXCPLD tristate "Mellanox I2C driver" - depends on X86_64 + depends on X86_64 || COMPILE_TEST help This exposes the Mellanox platform I2C busses to the linux I2C layer for X86 based systems. @@ -1403,8 +1405,8 @@ config I2C_OPAL config I2C_ZX2967 tristate "ZTE ZX2967 I2C support" - depends on ARCH_ZX - default y + depends on ARCH_ZX || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC)) + default y if ARCH_ZX help Selecting this option will add ZX2967 I2C driver. This driver can also be built as a module. If so, the module will be -- 2.17.1
