On Mon, 13 Jan 2020 22:06:42 +0100, Wolfram Sang wrote: > The driver is not 'new' anymore, so remove details from the driver it > surpassed. > > Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> > --- > drivers/i2c/busses/Kconfig | 10 ++-------- > 1 file changed, 2 insertions(+), 8 deletions(-) > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 933f15f0ad67..b2840c5ebf24 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -1202,14 +1202,8 @@ config I2C_PARPORT > This supports parallel port I2C adapters such as the ones made by > Philips or Velleman, Analog Devices evaluation boards, and more. > Basically any adapter using the parallel port as an I2C bus with > - no extra chipset is supported by this driver, or could be. > - > - This driver is a replacement for (and was inspired by) an older > - driver named i2c-philips-par. The new driver supports more devices, > - and makes it easier to add support for new devices. > - > - An adapter type parameter is now mandatory. Please read the file > - Documentation/i2c/busses/i2c-parport.rst for details. > + no extra chipset is supported by this driver, or could be. Please > + read the file Documentation/i2c/busses/i2c-parport.rst for details. > > This support is also available as a module. If so, the module > will be called i2c-parport. Reviewed-by: Jean Delvare <jdelvare@xxxxxxx> -- Jean Delvare SUSE L3 Support
