[PATCH v2 3/4] dt-bindings: at24: remove the optional property write-protect-gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



NVMEM framework is an interface for the at24 EEPROMs as well as for
other drivers, instead of passing the wp-gpios over the different
drivers each time, it would be better to pass it over the NVMEM
subsystem once and for all.

Removing the optional property form the device tree binding document.

Signed-off-by: Khouloud Touil <ktouil@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/eeprom/at24.yaml | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index e8778560d966..75de83708146 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -145,10 +145,7 @@ properties:
       over reads to the next slave address. Please consult the manual of
       your device.
 
-  wp-gpios:
-    description:
-      GPIO to which the write-protect pin of the chip is connected.
-    maxItems: 1
+  wp-gpios: true
 
   address-width:
     allOf:
@@ -181,7 +178,6 @@ examples:
           compatible = "microchip,24c32", "atmel,24c32";
           reg = <0x52>;
           pagesize = <32>;
-          wp-gpios = <&gpio1 3 0>;
           num-addresses = <8>;
       };
     };
-- 
2.17.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux