Linux GPIO

• Thread Index

• Re: [PATCH v2 1/4] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Takashi Sakamoto <o-takashi@xxxxxxxxxxxxx>
• Re: [PATCH v3 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 2/4] pinctrl: renesas: rzg2l: Add support for RZ/G3E SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 0/4] Add RZ/G3E pinctrl support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Joe Hattori <joe@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Joe Hattori <joe@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] regulator:s5m8767 Fully convert to GPIO descriptors
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH] regulator:s5m8767 Fully convert to GPIO descriptors
  • From: Song Chen <chensong_2000@xxxxxx>
• [brgl:gpio/for-current] BUILD SUCCESS d4216a10e8b6f15b5e47663abd6c21d1149bb5d0
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 10/11] cxl/pmem: Remove match_nvdimm_bridge()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• Re: [PATCH v3 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• Re: [PATCH v3 01/11] libnvdimm: Simplify nd_namespace_store() implementation
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [brgl:gpio/for-next] BUILD SUCCESS 26a4dedc5f3cdb6e2de79371f57d12e5119f03c1
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 01/11] libnvdimm: Simplify nd_namespace_store() implementation
  • From: Alison Schofield <alison.schofield@xxxxxxxxx>
• Re: [PATCH v3 10/11] cxl/pmem: Remove match_nvdimm_bridge()
  • From: Alison Schofield <alison.schofield@xxxxxxxxx>
• Re: [PATCH v3 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Alison Schofield <alison.schofield@xxxxxxxxx>
• RE: [PATCH 1/4] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/4] pinctrl: renesas: rzg2l: Add support for RZ/G3E SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 0/4] Add RZ/G2L pinctrl support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: ipq5424: configure spi0 node for rdp466
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: fix license tags
  • From: Kent Gibson <warthog618@xxxxxxxxx>
• [PATCH v1 char-misc-next] misc: microchip: pci1xxxx: Add push-pull drive support for GPIO
  • From: Rengarajan S <rengarajan.s@xxxxxxxxxxxxx>
• [PATCH v1 char-misc-linus 1/2] misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
  • From: Rengarajan S <rengarajan.s@xxxxxxxxxxxxx>
• [PATCH v1 char-misc-linus 2/2] misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
  • From: Rengarajan S <rengarajan.s@xxxxxxxxxxxxx>
• [PATCH v1 char-misc-linus 0/2] misc: microchip: pci1xxxx: Resolve kernel panic and return code mismatch issues
  • From: Rengarajan S <rengarajan.s@xxxxxxxxxxxxx>
• Re: [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• Re: [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• Re: [PATCH v3 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH] pinctrl: ingenic: Replace seq_printf() by seq_puts()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: fix license tags
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] gpio: twl4030: use gpiochip_get_data
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] drivers: gpio: gpio-ljca: Initialize num before accessing item in ljca_gpio_config
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/2] gpio: omap: save two lines by using devm_clk_get_prepared()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/2] gpio: omap: allow building the module with COMPILE_TEST=y
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• Re: [PATCH v3 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: allow building the module with COMPILE_TEST=y
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: "Frank Wunderlich (linux)" <linux@xxxxxxxxx>
• Re: [PATCH v3 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: quic_zijuhu <quic_zijuhu@xxxxxxxxxxx>
• Re: [PATCH v3 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] pinctrl: stm32: Add check for clk_enable()
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH] pinctrl: stm32: Add check for clk_enable()
  • From: Mingwei Zheng <zmw12306@xxxxxxxxx>
• [PATCH] pinctrl: nomadik: Add check for clk_enable()
  • From: Mingwei Zheng <zmw12306@xxxxxxxxx>
• [brgl:gpio/for-current] BUILD SUCCESS 70327137eb3eb64f346191dcd0ee5140d5ab34d8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 00/11] driver core: Constify API device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 11/11] usb: typec: class: Remove both cable_match() and partner_match()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 10/11] cxl/pmem: Remove match_nvdimm_bridge()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 09/11] driver core: Introduce an device matching API device_match_type()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 08/11] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 07/11] slimbus: core: Simplify of_find_slim_device() implementation
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 06/11] driver core: Remove match_any()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 05/11] driver core: Simplify API device_find_child_by_name() implementation
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 04/11] driver core: Constify API device_find_child() then adapt for various usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 03/11] bus: fsl-mc: Constify fsl_mc_device_match()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 02/11] slimbus: core: Constify slim_eaddr_equal()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 01/11] libnvdimm: Simplify nd_namespace_store() implementation
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v3 00/11] driver core: Constify API device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 12/15] pinctrl: qcom: spmi-mpp: Add PM8937 compatible
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 19/24] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 6/7] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: broadcom: Fix device tree errors on BCM2712.
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH 4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 8/9] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 1/9] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 8/9] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 1/9] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 11/15] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 01/15] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 20/24] pinctrl: qcom: spmi-mpp: Add PM8937 compatible
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 01/24] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 08/24] pinmux: Use sequential access to access desc->pinmux data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 27/33] pinctrl: qcom: spmi-mpp: Add PM8937 compatible
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 26/33] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 12/33] pinmux: Use sequential access to access desc->pinmux data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 01/33] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 29/36] pinctrl: qcom: spmi-mpp: Add PM8937 compatible
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 28/36] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 12/36] pinmux: Use sequential access to access desc->pinmux data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 01/36] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] gpio: GPIO_MVEBU should not default to y when compile-testing
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH] gpio: gpiolib: fix refcount imbalance in gpiochip_setup_dev()
  • From: Joe Hattori <joe@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: GPIO_MVEBU should not default to y when compile-testing
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 7/7] gpio: graniterapids: Fix GPIO Ack functionality
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 6/7] gpio: graniterapids: Check if GPIO line can be used for IRQs
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 5/7] gpio: graniterapids: Determine if GPIO pad can be used by driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/7] gpio: graniterapids: Fix vGPIO driver crash
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 3/7] gpio: graniterapids: Fix invalid GPI_IS register offset
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 2/7] gpio: graniterapids: Fix incorrect BAR assignment
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 4/7] gpio: graniterapids: Fix invalid RXEVCFG register bitmask
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 0/7] gpio: Fixes for Granite Rapids vGPIO driver
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] gpio: twl4030: use gpiochip_get_data
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: allow building the module with COMPILE_TEST=y
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH] gpio: GPIO_MVEBU should not default to y when compile-testing
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] gpio: GPIO_MVEBU should not default to y when compile-testing
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: allow building the module with COMPILE_TEST=y
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] gpio: GPIO_MVEBU should not default to y when compile-testing
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 1/2] gpio: omap: allow building the module with COMPILE_TEST=y
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: save two lines by using devm_clk_get_prepared()
  • From: "Sverdlin, Alexander" <alexander.sverdlin@xxxxxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: allow building the module with COMPILE_TEST=y
  • From: "Sverdlin, Alexander" <alexander.sverdlin@xxxxxxxxxxx>
• [PATCH 1/2] gpio: omap: allow building the module with COMPILE_TEST=y
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] gpio: idio-16: Actually make use of the GPIO_IDIO_16 symbol namespace
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH 2/2] gpio: omap: save two lines by using devm_clk_get_prepared()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] gpio: omap: Silence lockdep "Invalid wait context"
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] gpio: GPIO_MVEBU should not default to y when compile-testing
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Thomas Weißschuh <thomas@xxxxxxxx>
• [PATCH] drivers: gpio: gpio-ljca: Initialize num before accessing item in ljca_gpio_config
  • From: Haoyu Li <lihaoyu499@xxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH] v1 pinctrl: mtk-eint: add eint new design for mt8196
  • From: chang hao <ot_chhao.chang@xxxxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH v3 0/9] misc: Support TI FPC202 dual-port controller
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v3 0/9] misc: Support TI FPC202 dual-port controller
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• Re: [PATCH v3 8/9] i2c: Support dynamic address translation
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• Re: [PATCH v3 2/9] media: i2c: ds90ub960: Replace aliased clients list with bitmap
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• Re: [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• Re: [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: quic_zijuhu <quic_zijuhu@xxxxxxxxxxx>
• [PATCH v2 11/32] libnvdimm: Simplify nd_namespace_store() implementation
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 10/32] nvdimm: Adapt for constified device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 09/32] pwm: Adapt for constified device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 08/32] net: dsa: Adapt for constified device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 07/32] gpio: sim: Remove gpio_sim_dev_match_fwnode()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 06/32] thunderbolt: Adapt for constified device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 05/32] media: pci: mgb4: Adapt for constified device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 04/32] hwmon: Adapt for constified device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 03/32] drm/mediatek: Adapt for constified device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 02/32] driver core: Introduce device_match_type() to match device with a device type
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 01/32] driver core: Constify API device_find_child()
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• [PATCH v2 00/32] driver core: Constify API device_find_child() and adapt for various existing usages
  • From: Zijun Hu <zijun_hu@xxxxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: Fix PyDict_Next contiguous
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/7] dtbindings: display: Fix BCM2835 HVS bindings for BCM2712
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [libgpiod][PATCH] bindings: python: Fix PyDict_Next contiguous
  • From: George Harker <george@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] [libgpiod][PATCH] bindings: python: Fix PyDict_Next contiguous
  • From: George Harker <george@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 7/7] arm64: dts: broadcom: Fix device tree errors on BCM2712.
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: gpio: brcmstb: add gpio-line-name
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH 6/7] arm: dts: broadcom: Add interrupt-controller flag for intc on BCM2711
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/15] dt-bindings: mmc: atmel,sama5d2-sdhci: add microchip,sama7d65-sdhci
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 6/7] arm: dts: broadcom: Add interrupt-controller flag for intc on BCM2711
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 1/7] dtbindings: display: bcm2711-hdmi: Correct bindings for 2712
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 5/7] arm64: dts: broadcom: Add interrupt-controller flag for intc on BCM2712
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: gpio: brcmstb: add gpio-line-name
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/7] dtbindings: display: bcm2711-hdmi: Correct bindings for 2712
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: broadcom: Fix device tree errors on BCM2712.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH 5/7] arm64: dts: broadcom: Add interrupt-controller flag for intc on BCM2712
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH 3/7] dt-bindings: gpio: brcmstb: add gpio-line-name
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH 2/7] dtbindings: display: Fix BCM2835 HVS bindings for BCM2712
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] pinctrl: samsung: fix fwnode refcount cleanup in error path and update comment
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/7] drm/vc4: Fixup DT and DT binding issues from recent patchset
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH 1/7] dtbindings: display: bcm2711-hdmi: Correct bindings for 2712
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Fix irq handling if an error occurs in exynos_irq_demux_eint16_31()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] gpio: pca953x: do not enable regmap cache when there is no regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] pinctrl: mediatek: add eint new design for mt8196
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] pinctrl: mediatek: add eint new design for mt8196
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 05/10] clk: rp1: Add support for clocks provided by RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 03/10] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v5 0/5] Add pinctrl support for mt7988
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v5 4/5] arm64: dts: mediatek: mt7988: add pinctrl support
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v5 1/5] pinctrl: mediatek: add support for MTK_PULL_PD_TYPE
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v5 2/5] pinctrl: mediatek: add MT7988 pinctrl driver
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v5 5/5] arm64: dts: mediatek: mt7988: add pinctrl subnodes for bpi-r4
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH] pinctrl: mediatek: add eint new design for mt8196
  • From: chang hao <ot_chhao.chang@xxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• Re: [PATCH] libgpiod: bindings: python: Fix PyDict_Next contiguous assumption and pypy
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] libgpiod: bindings: python: Fix PyDict_Next contiguous assumption and pypy
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: relax the verbosity adjustment in build_tests.sh
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] libgpiod: bindings: python: Fix PyDict_Next contiguous assumption and pypy
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] libgpiod: bindings: python: Fix PyDict_Next contiguous assumption and pypy
  • From: George Harker <george@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Fix PyDict_Next contiguous assumption and pypy
  • From: George Harker <george@xxxxxxxxxxxxxxxxxxxxx>
• [linusw-pinctrl:fixes] BUILD SUCCESS 39c53afeb5993c46edeeaac2214e53ba4bece49e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/6] Introduce devm_kmemdup_array() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] drm/msm/dp: Support external GPIO HPD with 3rd pinctrl chip
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 4/8] drm/msm/dp: Add DisplayPort support for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/9] media: i2c: ds90ub960: Replace aliased clients list with bitmap
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] drm/msm/dp: Support external GPIO HPD with 3rd pinctrl chip
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 0/9] misc: Support TI FPC202 dual-port controller
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] Introduce devm_kmemdup_array() helper
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 8/9] i2c: Support dynamic address translation
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] drm/msm/dp: Support external GPIO HPD with 3rd pinctrl chip
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add DP support for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: display/msm: Document DP on QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 8/8] drm/msm/dp: Support external GPIO HPD with 3rd pinctrl chip
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 4/8] drm/msm/dp: Add DisplayPort support for QCS615
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 2/8] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add DP support for QCS615
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 0/8] Add DisplayPort support for QCS615 platform
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• [PATCH 1/8] dt-bindings: display/msm: Document DP on QCS615
  • From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
• RE: [PATCH v2] gpio: pca953x: do not enable regmap cache when there is no regulator
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v2] gpio: pca953x: do not enable regmap cache when there is no regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pwm: brcm,bcm7038: Document the 'open-drain' property
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Esben Haabendal <esben@xxxxxxxxxx>
• [PATCH v2] gpio: pca953x: do not enable regmap cache when there is no regulator
  • From: haibo.chen@xxxxxxx
• RE: [PATCH] gpio: gpio-pca953x: do not enable regmap cache when there is no regulator
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [GIT PULL] gpio fixes for v6.13-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v2] gpio: omap: Silence lockdep "Invalid wait context"
  • From: "A. Sverdlin" <alexander.sverdlin@xxxxxxxxxxx>
• RE: [External] - [libgpiod][PATCH] bindings: python: fix license tags
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• Re: [PATCH v3 05/25] pinctrl: renesas: rzg2l: Add audio clock pins
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v3 01/25] clk: renesas: r9a08g045-cpg: Add clocks, resets and power domains support for SSI
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• [libgpiod][PATCH] bindings: python: fix license tags
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 01/25] clk: renesas: r9a08g045-cpg: Add clocks, resets and power domains support for SSI
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v3 05/25] pinctrl: renesas: rzg2l: Add audio clock pins
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [libgpiod][PATCH] bindings: python: relax the verbosity adjustment in build_tests.sh
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] Preserve the flags portion on 1:1 dma-ranges mapping
  • From: Rob Herring <robh@xxxxxxxxxx>
• [libgpiod][PATCH] bindings: python: relax the verbosity adjustment in build_tests.sh
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] gpio: gpio-pca953x: do not enable regmap cache when there is no regulator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: migrate metadata to pyproject.toml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH] gpio: omap: Silence lockdep "Invalid wait context"
  • From: "Sverdlin, Alexander" <alexander.sverdlin@xxxxxxxxxxx>
• [GIT PULL] gpio fixes for v6.13-rc1
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Rasmus Villemoes <ravi@xxxxxxxxx>
• Re: [PATCH] gpio: omap: Silence lockdep "Invalid wait context"
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Rasmus Villemoes <ravi@xxxxxxxxx>
• Re: [PATCH v2 6/6] ASoC: Intel: avs: use devm_kmemdup_array()
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] gpio: gpio-pca953x: do not enable regmap cache when there is no regulator
  • From: haibo.chen@xxxxxxx
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v2 0/6] Introduce devm_kmemdup_array() helper
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 5/6] input: sparse-keymap: use devm_kmemdup_array()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/6] devres: Introduce devm_kmemdup_array()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/6] Introduce devm_kmemdup_array() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] pinctrl: tangier: use devm_kmemdup_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] pinctrl: intel: copy communities using devm_kmemdup_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio: omap: Silence lockdep "Invalid wait context"
  • From: "Sverdlin, Alexander" <alexander.sverdlin@xxxxxxxxxxx>
• Re: [PATCH] gpio: omap: Silence lockdep "Invalid wait context"
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 6/6] ASoC: Intel: avs: use devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 3/6] pinctrl: tangier: use devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 5/6] input: sparse-keymap: use devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 4/6] pinctrl: pxa2xx: use devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 1/6] devres: Introduce devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 0/6] Introduce devm_kmemdup_array() helper
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v2 2/6] pinctrl: intel: copy communities using devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: imx: Allow user to disable pinctrl
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v1 1/5] devres: Introduce devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v3 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: pinctrl: qcom: update spi0 function
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [GIT PULL] pin control changes for v6.13
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL] pin control changes for v6.13
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v4 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v4 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v3 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v1 5/5] ASoC: Intel: avs: use devm_kmemdup_array()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 1/5] devres: Introduce devm_kmemdup_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/5] devres: Introduce devm_kmemdup_array()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v1 1/5] devres: Introduce devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] pin control changes for v6.13
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH 0/3] bindings: python: drop dependency on distutils
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [GIT PULL] pin control changes for v6.13
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpio: omap: Silence lockdep "Invalid wait context"
  • From: "A. Sverdlin" <alexander.sverdlin@xxxxxxxxxxx>
• [PATCH v3 9/9] misc: add FPC202 dual port controller driver
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 8/9] i2c: Support dynamic address translation
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 7/9] i2c: support per-channel ATR alias pools
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 6/9] i2c: rename field 'alias_list' of struct i2c_atr_chan to 'alias_pairs'
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 4/9] i2c: use client addresses directly in ATR interface
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 5/9] i2c: move ATR alias pool to a separate struct
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 3/9] media: i2c: ds90ub960: Protect alias_use_mask with a mutex
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 2/9] media: i2c: ds90ub960: Replace aliased clients list with bitmap
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v3 0/9] misc: Support TI FPC202 dual-port controller
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v1 1/5] devres: Introduce devm_kmemdup_array()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [GIT PULL] pin control changes for v6.13
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 12/15] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH 11/15] ARM: dts: microchip: add sama7d65 SoC DT
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH 15/15] clk: at91: sama7d65: add sama7d65 pmc driver
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH 10/15] ARM: configs: at91: sama7: add new SoC config
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• [PATCH AUTOSEL 6.11 01/20] gpio: free irqs that are still requested when the chip is being removed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.12 01/23] gpio: free irqs that are still requested when the chip is being removed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v4 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 05/10] clk: rp1: Add support for clocks provided by RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 03/10] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v4 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 2/2] of: address: Preserve the flags portion on 1:1 dma-ranges mapping
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 1/2] of/unittest: Add empty dma-ranges address translation tests
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [PATCH v2 0/2] Preserve the flags portion on 1:1 dma-ranges mapping
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH v1 1/5] devres: Introduce devm_kmemdup_array()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v7 6/8] arm64: dts: qcom: Add initial support for MSM8917
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 3/8] pinctrl: qcom: Add MSM8917 tlmm pinctrl driver
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 7/8] dt-bindings: arm: qcom: Add Xiaomi Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 8/8] arm64: dts: qcom: Add Xiaomi Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 5/8] dt-bindings: nvmem: Add compatible for MS8917
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 2/8] dt-bindings: pinctrl: qcom: Add MSM8917 pinctrl
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 0/8] Add MSM8917/PM8937/Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 1/8] arm64: dts: qcom: Add PM8937 PMIC
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v7 4/8] dt-bindings: iommu: qcom,iommu: Add MSM8917 IOMMU to SMMUv1 compatibles
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v1 5/5] ASoC: Intel: avs: use devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v1 2/5] pinctrl: intel: copy communities using devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v1 3/5] pinctrl: pxa2xx: use devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v1 0/5] Introduce devm_kmemdup_array() helper
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v1 4/5] input: sparse-keymap: use devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH v1 1/5] devres: Introduce devm_kmemdup_array()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [GIT PULL] pin control changes for v6.13
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [brgl:gpio/for-current] BUILD SUCCESS f57c084928661969a337c731cd05e1da97320829
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 6/7] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] Fix a potential abuse of seq_printf() format string in drivers
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v1 8/9] pwm: Add Nuvoton NCT6694 PWM support
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [libgpiod][PATCH] bindings: python: migrate metadata to pyproject.toml
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• Re: [PATCH] Fix a potential abuse of seq_printf() format string in drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: mpsse: Remove usage of the deprecated ida_simple_xx() API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] gpio: mpsse: Remove usage of the deprecated ida_simple_xx() API
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: ipq5424: configure spi0 node for rdp466
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: ipq5424: add spi0 node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 2/4] pinctrl: qcom: ipq5424: split spi0 pin group
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: pinctrl: qcom: update spi0 function
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 0/4] Add SPI0 support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v2 6/7] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/7] can: Add Nuvoton NCT6694 CAN support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• Re: [PATCH v2 4/7] can: Add Nuvoton NCT6694 CAN support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v2 6/7] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• Re: [PATCH v2 5/7] watchdog: Add Nuvoton NCT6694 WDT support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• Re: [PATCH v2 4/7] can: Add Nuvoton NCT6694 CAN support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: Add Nuvoton NCT6694 GPIO support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• Re: [PATCH] Fix a potential abuse of seq_printf() format string in drivers
  • From: Kees Cook <kees@xxxxxxxxxx>
• [brgl:gpio/for-current] BUILD SUCCESS 72cef64180de04a7b055b4773c138d78f4ebdb77
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH 0/3] bindings: python: drop dependency on distutils
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• Re: [PATCH] gpio: mxc: fix warning about static allocation of GPIO base
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] gpio: mxc: fix warning about static allocation of GPIO base
  • From: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 5/7] watchdog: Add Nuvoton NCT6694 WDT support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/7] gpio: Add Nuvoton NCT6694 GPIO support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3] gpio: exar: set value when external pull-up or pull-down is present
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/1] gpio: zevio: Add missed label initialisation
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/1] gpio: altera: Add missed base and label initialisations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 4/7] can: Add Nuvoton NCT6694 CAN support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 7/7] rtc: Add Nuvoton NCT6694 RTC support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v2 6/7] hwmon: Add Nuvoton NCT6694 HWMON support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v2 5/7] watchdog: Add Nuvoton NCT6694 WDT support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v2 4/7] can: Add Nuvoton NCT6694 CAN support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v2 3/7] i2c: Add Nuvoton NCT6694 I2C support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v2 2/7] gpio: Add Nuvoton NCT6694 GPIO support
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v2 1/7] mfd: Add core driver for Nuvoton NCT6694
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• [PATCH v2 0/7] Add Nuvoton NCT6694 MFD drivers
  • From: Ming Yu <a0282524688@xxxxxxxxx>
• Re: [GIT PULL] gpio updates for v6.13-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] Fix a potential abuse of seq_printf() format string in drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix a potential abuse of seq_printf() format string in drivers
  • From: Kees Cook <kees@xxxxxxxxxx>
• Re: [PATCH 00/15] Add support for SAMA7D65
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [libgpiod][PATCH v2 02/23] bindings: python: make internal a private submodule
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/3] bindings: python: tests: rename procname to system
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/3] bindings: python: tests: provide and use system.check_kernel_version()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/3] bindings: python: add .pyi files to EXTRA_DIST
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/3] bindings: python: drop dependency on distutils
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/3] gpio: Fix a potential abuse of seq_printf() format string
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: pinctrl: add compatible for Allwinner A523/T527
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH 11/15] ARM: dts: microchip: add sama7d65 SoC DT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 12/15] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 13/15] clk: at91: clk-master: increase maximum number of clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 00/15] Add support for SAMA7D65
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 09/15] dt-bindings: clock: at91: Allow MCKs to be exported and referenced in DT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 00/15] Add support for SAMA7D65
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 03/15] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 02/15] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 02/15] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] Fix a potential abuse of seq_printf() format string in drivers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/5] i2c: Congatec Board Controller i2c bus driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [linusw-pinctrl:devel] BUILD SUCCESS ac6f0825e582f2216a582c9edf0cee7bfe347ba6
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linusw-pinctrl:for-next] BUILD SUCCESS 1aa06a2eb27647545a1dcaf0612b5192e2eda653
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 3/5] i2c: Congatec Board Controller i2c bus driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 15/15] clk: at91: sama7d65: add sama7d65 pmc driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 06/15] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 08/15] dt-bindings: clock: Add SAMA7D65 PMC compatible string
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 00/15] Add support for SAMA7D65
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 02/15] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 14/15] clk: at91: clk-sam9x60-pll: increase maximum amount of plls
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 15/15] clk: at91: sama7d65: add sama7d65 pmc driver
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 12/15] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 13/15] clk: at91: clk-master: increase maximum number of clocks
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 11/15] ARM: dts: microchip: add sama7d65 SoC DT
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 10/15] ARM: configs: at91: sama7: add new SoC config
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 09/15] dt-bindings: clock: at91: Allow MCKs to be exported and referenced in DT
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 07/15] dt-bindings: clocks: atmel,at91sam9x5-sckc: add sama7d65
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 05/15] dt-bindings: serial: atmel,at91-usart: add microchip,sama7d65-usart
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 04/15] dt-bindings: mmc: atmel,sama5d2-sdhci: add microchip,sama7d65-sdhci
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 03/15] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• [PATCH 01/15] dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
  • From: <Ryan.Wanner@xxxxxxxxxxxxx>
• RE: [libgpiod][PATCH] bindings: python: tests: replace LooseVersion with packaging.version.Version
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• RE: [libgpiod][PATCH] bindings: python: tests: replace LooseVersion with packaging.version.Version
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• RE: [libgpiod][PATCH] bindings: python: drop distutils from build_tests.py
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: tests: replace LooseVersion with packaging.version.Version
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: drop distutils from build_tests.py
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH] bindings: python: tests: replace LooseVersion with packaging.version.Version
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [libgpiod][PATCH] bindings: python: drop distutils from build_tests.py
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [libgpiod][PATCH] bindings: python: tests: replace LooseVersion with packaging.version.Version
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH v2 00/23] bindings: python: conform to mypy and ruff linter recommendations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH v2 00/23] bindings: python: conform to mypy and ruff linter recommendations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH v2 00/23] bindings: python: conform to mypy and ruff linter recommendations
  • From: Vincent Fazio <vfazio@xxxxxxxxx>
• Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [libgpiod][PATCH v2 00/23] bindings: python: conform to mypy and ruff linter recommendations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3] gpio: exar: set value when external pull-up or pull-down is present
  • From: sai kumar <skmr537@xxxxxxxxx>
• Re: [libgpiod][PATCH v2 18/23] bindings: python: tests: add type stubs for external modules
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [libgpiod][PATCH v2 18/23] bindings: python: tests: add type stubs for external modules
  • From: Vincent Fazio <vfazio@xxxxxxxxx>
• Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [libgpiod][PATCH v2 05/23] bindings: python: add type stub for the _ext module
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 2/7] mfd: nxp-siul2: add support for NXP SIUL2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Fix irq handling if an error occurs in exynos_irq_demux_eint16_31()
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [brgl:gpio/for-next] BUILD SUCCESS bef29ca3a6458582ac13320d47bf2646e5734dc8
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linusw-pinctrl:for-next] BUILD SUCCESS 9eb198b4be4426ea776f17086ea7f5333c1e07d8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] pinctrl: airoha: Use unsigned long for bit search
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 05/25] pinctrl: renesas: rzg2l: Add audio clock pins
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4] pinctrl: k210: Undef K210_PC_DEFAULT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Fix irq handling if an error occurs in exynos_irq_demux_eint16_31()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Fix irq handling if an error occurs in exynos_irq_demux_eint16_31()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v10] pwm: airoha: Add support for EN7581 SoC
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v10] pwm: airoha: Add support for EN7581 SoC
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [GIT PULL] gpio updates for v6.13-rc1
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3] gpio: exar: set value when external pull-up or pull-down is present
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [linusw-pinctrl:devel] BUILD SUCCESS 6bc0ebfb1d920f13c522545f114cdabb49e9408a
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linusw-pinctrl:fixes] BUILD SUCCESS d40b69c93650aac1b3ee8d83ef11c94e18f0c610
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3] gpio: exar: set value when external pull-up or pull-down is present
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v6 10/10] arm64: dts: qcom: Add Xiaomi Redmi 5A
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• [PATCH v2 9/9] misc: add FPC202 dual port controller driver
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 6/9] i2c: rename field 'alias_list' of struct i2c_atr_chan to 'alias_pairs'
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 8/9] i2c: Support dynamic address translation
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 5/9] i2c: move ATR alias pool to a separate struct
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 7/9] i2c: support per-channel ATR alias pools
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 3/9] media: i2c: ds90ub960: Protect alias_use_mask with a mutex
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 2/9] media: i2c: ds90ub960: Replace aliased clients list with bitmap
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 4/9] i2c: use client addresses directly in ATR interface
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 0/9] misc: Support TI FPC202 dual-port controller
  • From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
• [PATCH v2 1/1] gpio: altera: Add missed base and label initialisations
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: samsung: Fix irq handling if an error occurs in exynos_irq_demux_eint16_31()
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 1/1] gpio: zevio: Add missed label initialisation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: gpio-exar: replace division condition with direct comparison
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/5] pinctrl: meson: Add driver support for Amlogic A4 SoCs
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH] pinctrl: airoha: Use unsigned long for bit search
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: (subset) [PATCH 00/35] Reorganize kerneldoc parameter names
  • From: Michael Ellerman <patch-notifications@xxxxxxxxxxxxxx>
• [PATCH] pinctrl: samsung: Fix irq handling if an error occurs in exynos_irq_demux_eint16_31()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] pinctrl: airoha: Use unsigned long for bit search
  • From: Kees Cook <kees@xxxxxxxxxx>
• [brgl:gpio/for-next] BUILD SUCCESS 1b81e73e3babc88017232253f99ffdad6d370bd3
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/1] gpio: zevio: Add missed label initialisation
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 1/1] gpio: altera: Add missed base and label initialisations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 1/1] gpio: altera: Add missed base and label initialisations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 4/5] pinctrl: meson: Add driver support for Amlogic A4 SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/5] dt-bindings: pinctrl: move gpio-cells and gpio-controller property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 00/10] Add MSM8917/PM8937/Redmi 5A
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] gpio: gpio-exar: replace division condition with direct comparison
  • From: Suraj Sonawane <surajsonawane0215@xxxxxxxxx>
• [PATCH v1 1/1] gpio: zevio: Add missed label initialisation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] gpio: altera: Add missed base and label initialisations
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: gpio-exar: replace division condition with direct comparison
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] gpio: gpio-exar: replace division condition with direct comparison
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH 2/2] of: address: Preserve the flags portion on 1:1 dma-ranges mapping
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH] gpio: gpio-exar: replace division condition with direct comparison
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v13 08/12] clk: mmp: Add Marvell PXA1908 MPMU driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH RESEND v13 07/12] clk: mmp: Add Marvell PXA1908 APMU driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH RESEND v13 06/12] clk: mmp: Add Marvell PXA1908 APBCP driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH RESEND v13 05/12] clk: mmp: Add Marvell PXA1908 APBC driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH RESEND v13 04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH RESEND v13 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• Re: [PATCH] PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes
  • From: Andrea della Porta <andrea.porta@xxxxxxxx>
• [libgpiod][PATCH v2 20/23] bindings: python: tests: add type hints to internal members
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 22/23] bindings: python: tests: selectively use f-strings
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 11/23] bindings: python: fix LineRequest union-attr type errors
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 15/23] bindings: python: tests: fix duplicate test name
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 16/23] bindings: python: tests: clean up imports and exports
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 19/23] bindings: python: tests: add missing method type hints
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 18/23] bindings: python: tests: add type stubs for external modules
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 09/23] bindings: python: fix Chip union-attr type errors
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 23/23] bindings: python: configure and document dev dependencies
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 17/23] bindings: python: tests: make EventType private to prevent export
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 21/23] bindings: python: tests: ignore purposeful type errors
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 14/23] bindings: python: selectively use f-strings
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 12/23] bindings: python: convert lines to offsets in LineRequest
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 13/23] bindings: python: cast return value of LineRequest.get_values
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 08/23] bindings: python: add type hints for Chip's internal members
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 10/23] bindings: python: add type hints for LineRequest's internal members
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 07/23] bindings: python: add type hint for the sec variable in poll_fd
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 06/23] bindings: python: add missing method type hints
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 05/23] bindings: python: add type stub for the _ext module
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 02/23] bindings: python: make internal a private submodule
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 03/23] bindings: python: loosen type requirements in public API
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 01/23] bindings: python: clean up imports and exports
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 00/23] bindings: python: conform to mypy and ruff linter recommendations
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• [libgpiod][PATCH v2 04/23] bindings: python: explicitly type gpiod.request_lines
  • From: Vincent Fazio <vfazio@xxxxxxxxxxx>
• Re: [PATCH] gpio: tegra186: Allow to enable driver on Tegra234
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: grgpio: Add NULL check in grgpio_probe
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] gpio: grgpio: Add NULL check in grgpio_probe
  • From: Charles Han <hanchunchao@xxxxxxxxxx>
• Re: [PATCH v6 4/5] pinctrl: meson: Add driver support for Amlogic A4 SoCs
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] gpio: gpio-exar: replace division condition with direct comparison
  • From: Suraj Sonawane <surajsonawane0215@xxxxxxxxx>
• Re: [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: (subset) [PATCH v9 4/6] dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio: tegra186: Allow to enable driver on Tegra234
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [brgl:gpio/for-next] BUILD SUCCESS 400913bd4edd76ef1775bfd95543846bd6f5ed71
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 4/5] pinctrl: meson: Add driver support for Amlogic A4 SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 1/1] gpio: Move and sort Kconfig entries as suggested
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] gpio: tegra186: Allow to enable driver on Tegra234
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v6 10/10] arm64: dts: qcom: Add Xiaomi Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH v6 05/10] thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v6 06/10] dt-bindings: iommu: qcom,iommu: Add MSM8917 IOMMU to SMMUv1 compatibles
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v6 07/10] dt-bindings: nvmem: Add compatible for MS8917
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: gpio-exar: replace division condition with direct comparison
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] tools: gpio: Fix several incorrect format specifiers
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 0/1] polarfire gpio driver follow-ups
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 00/10] Add MSM8917/PM8937/Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v6 04/10] dt-bindings: thermal: tsens: Add MSM8937
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v6 01/10] arm64: dts: qcom: Add PM8937 PMIC
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v6 08/10] arm64: dts: qcom: Add initial support for MSM8917
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v6 09/10] dt-bindings: arm: qcom: Add Xiaomi Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v6 05/10] thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v6 03/10] pinctrl: qcom: Add MSM8917 tlmm pinctrl driver
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v6 04/10] dt-bindings: thermal: tsens: Add MSM8937
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v6 02/10] dt-bindings: pinctrl: qcom: Add MSM8917 pinctrl
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH v5 08/10] arm64: dts: qcom: Add initial support for MSM8917
  • From: barnabas.czeman@xxxxxxxxxxxxxx
• Re: [PATCH v6 7/7] MAINTAINERS: add MAINTAINER for NXP SIUL2 MFD driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/2] pinctrl: qcom: Introduce pinctrl for SM8750
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH v3 22/25] arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 20/25] ASoC: dt-bindings: renesas,rz-ssi: Document the Renesas RZ/G3S SoC
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 09/25] ASoC: renesas: rz-ssi: Remove pdev member of struct rz_ssi_priv
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• RE: [PATCH v3 21/25] arm64: dts: renesas: r9a08g045: Add SSI nodes
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 23/25] arm64: dts: renesas: Add da7212 audio codec node
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 13/25] ASoC: renesas: rz-ssi: Use temporary variable for struct device
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 07/25] ASoC: renesas: rz-ssi: Use only the proper amount of dividers
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v7 7/7] pinctrl: mediatek: Add MT6735 pinctrl driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 25/25] arm64: dts: renesas: rzg3s-smarc: Add sound card
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 22/25] arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 24/25] arm64: dts: renesas: rzg3s-smarc: Enable SSI3
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 21/25] arm64: dts: renesas: r9a08g045: Add SSI nodes
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 19/25] ASoC: renesas: rz-ssi: Add suspend to RAM support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 18/25] ASoC: renesas: rz-ssi: Issue software reset in hw_params API
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 17/25] ASoC: renesas: rz-ssi: Add runtime PM support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 16/25] ASoC: renesas: rz-ssi: Enable runtime PM autosuspend support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 15/25] ASoC: renesas: rz-ssi: Rely on the ASoC subsystem to runtime resume/suspend the SSI
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 14/25] ASoC: renesas: rz-ssi: Use goto label names that specify their actions
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 12/25] ASoC: renesas: rz-ssi: Use readl_poll_timeout_atomic()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 11/25] ASoC: renesas: rz-ssi: Remove the first argument of rz_ssi_stream_is_play()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 10/25] ASoC: renesas: rz-ssi: Remove the rz_ssi_get_dai() function
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 08/25] ASoC: renesas: rz-ssi: Fix typo on SSI_RATES macro comment
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 06/25] ASoC: renesas: rz-ssi: Terminate all the DMA transactions
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 05/25] pinctrl: renesas: rzg2l: Add audio clock pins
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 04/25] clk: versaclock3: Add support for the 5L35023 variant
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 03/25] dt-bindings: clock: versaclock3: Document 5L35023 Versa3 clock generator
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 02/25] clk: versaclock3: Prepare for the addition of 5L35023 device
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 01/25] clk: renesas: r9a08g045-cpg: Add clocks, resets and power domains support for SSI
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v3 00/25] Add audio support for the Renesas RZ/G3S SoC
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH] pinctrl: mediatek: Add support for MT8196
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 4/4] gpio: rockchip: Set input direction when request irq
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/4] gpio: rockchip: support new version GPIO
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 1/4] gpio: rockchip: explan the format of the GPIO version ID
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 0/6] pinctrl: cy8c95x0: A portion of cleanups
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/1] gpio: mpfs: add CoreGPIO support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 0/1] polarfire gpio driver follow-ups
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v6 5/7] pinctrl: s32cc: change to "devm_pinctrl_register_and_init"
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• [PATCH v6 2/7] mfd: nxp-siul2: add support for NXP SIUL2
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• [PATCH v6 0/7] gpio: siul2-s32g2: add initial GPIO driver
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• [PATCH v6 7/7] MAINTAINERS: add MAINTAINER for NXP SIUL2 MFD driver
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• [PATCH v6 3/7] arm64: dts: s32g: make pinctrl part of mfd node
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• [PATCH v6 6/7] pinctrl: s32cc: implement GPIO functionality
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH v7 4/5] pinctrl: meson: Add driver support for Amlogic A4 SoCs
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v7 5/5] arm64: dts: amlogic: a4: add pinctrl node
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH v7 4/5] pinctrl: meson: Add driver support for Amlogic A4 SoCs
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH v7 3/5] pinctrl: meson: add interface of of_xlate
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH v7 1/5] dt-bindings: pinctrl: move gpio-cells and gpio-controller property
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH v7 2/5] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH v7 0/5] Pinctrl: A4: Add pinctrl driver
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• Re: [PATCH v5 08/10] arm64: dts: qcom: Add initial support for MSM8917
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: pinctrl: add compatible for Allwinner A523/T527
  • From: Chen-Yu Tsai <wens@xxxxxxxx>