Re: [PATCH v8 6/8] arm64: dts: qcom: Add initial support for MSM8917

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>]

On 11.12.2024 6:59 PM, Barnabás Czémán wrote:
> From: Otto Pflüger <otto.pflueger@xxxxxxxxx>
> 
> Add initial support for MSM8917 SoC.
> 
> Signed-off-by: Otto Pflüger <otto.pflueger@xxxxxxxxx>
> [reword commit, rebase, fix schema errors]
> Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
> ---


> +
> +		cpu0: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x100>;
> +			next-level-cache = <&l2_0>;
> +			enable-method = "psci";
> +			clocks = <&apcs>;
> +			operating-points-v2 = <&cpu_opp_table>;
> +			#cooling-cells = <2>;
> +			power-domains = <&cpu_pd0>;
> +			power-domain-names = "psci";
> +		};
> +
> +		l2_0: l2-cache {
> +			compatible = "cache";
> +			cache-level = <2>;
> +			cache-unified;
> +		};

By "under CPU node", I meant as a subnode ;)

See sm8650.dtsi for reference

[...]

> +
> +			sdc1_default: sdc1-default-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					bias-disable;
> +					drive-strength = <16>;
> +				};
> +				cmd-pins {

Please separate these subnodes with a newline

[...]
> +
> +		apps_iommu: iommu@1e20000 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			#iommu-cells = <1>;
> +			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
> +			ranges = <0 0x01e20000 0x20000>;

'compatible' should come first

[...]

> +		intc: interrupt-controller@b000000 {
> +			compatible = "qcom,msm-qgic2";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			reg = <0x0b000000 0x1000>,
> +			      <0x0b002000 0x1000>;
> +		};

and 'reg' just after it

Otherwise looking fairly good!

Konrad