[PATCH v2 4/4] arm64: dts: qcom: ipq5424: configure spi0 node for rdp466

[Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>]

Enable the SPI0 node and configure the associated gpio pins.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V2:
	- Updated the hierarchy of spi0 node.
	- Removed the outer qupv3 node and
	  moved spi0 node to top level.

 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 43 +++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index d4d31026a026..60cfa8708eb4 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -23,6 +23,36 @@ &sleep_clk {
 };
 
 &tlmm {
+	spi0_default_state: spi0-default-state {
+		clk-pins {
+			pins = "gpio6";
+			function = "spi0_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		cs-pins {
+			pins = "gpio7";
+			function = "spi0_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		miso-pins {
+			pins = "gpio8";
+			function = "spi0_miso";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mosi-pins {
+			pins = "gpio9";
+			function = "spi0_mosi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio5";
@@ -57,3 +87,16 @@ &xo_board {
 	clock-frequency = <24000000>;
 };
 
+&spi0 {
+	pinctrl-0 = <&spi0_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
-- 
2.34.1