Linux ARM MSM

• Thread Index

• Re: [PATCH v3 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH V4 4/4] arm64: dts: qcom: sm8550: Add camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V4 2/4] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V4 3/4] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH V4 1/4] dt-bindings: clock: qcom: Add SM8550 camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: interrupt-controller: Add SDX75 PDC compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH V4 0/4] Add camera clock controller support for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH V3 4/5] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH v4 0/5] Add devicetree support for SDX75 Modem and IDP
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: arm: qcom: Document SDX75 platform and boards
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: firmware: scm: Add compatible for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH V3 3/5] clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH V3 2/5] clk: qcom: Remove support to set CAL_L field in lucid evo pll configure
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH v3 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v3 2/3] arm: dts: qcom: sdx55: Add interconnect path
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v3 0/3] PCI: qcom: ep: Add basic interconnect support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH 2/2] PCI: endpoint: Fix an IS_ERR() vs NULL bug
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/2] PCI: endpoint: Check correct variable in __pci_epf_mhi_alloc_map()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v1 2/2] misc: fastrpc: Add persistent header buffer support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 1/2] misc: fastrpc: Add cached buffer support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 0/2] Add changes for cached buffer and persistent header buffers
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons
  • From: Sridharan S N <quic_sridsn@xxxxxxxxxxx>
• Re: [PATCH V3 0/3] Minor updates in the IPQ5332 DTS files
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH v2 08/10] HID: i2c-hid: Support being a panel follower
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: reserved-memory: Add alloc-{bottom-up,top-down}
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 01/18] dt-bindings: display/msm: gpu: Document GMU wrapper-equipped A6xx
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq9574: enable the SPI NOR support in RDP433
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] iommu/arm-smmu-qcom: Add support for the interconnect
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: arm-smmu: Add interconnect for qcom SMMUs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/3] arm64: dts: qcom: sa8775p: Add interconnect to SMMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: ipq9574: enable the SPI NOR support in RDP433
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v6 8/9] PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH 1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [v9 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [v9 3/8] dt-bindings: pinctrl: qcom: Add support for ipq5018
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] pinctrl: qcom: Add support to log pin status before suspend for TLMM
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: Adreno devfreq lockdep splat with 6.3-rc2
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 3/3] iommu/arm-smmu-qcom: Add support for the interconnect
  • From: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sa8775p: Add interconnect to PCIe SMMU
  • From: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: arm-smmu: Add interconnect for qcom SMMUs
  • From: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
• [PATCH 0/3] arm64: dts: qcom: sa8775p: Add interconnect to SMMU
  • From: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: idle-states: Add idle-state-disabled property
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• [PATCH v4 3/4] ARM: dts: qcom-pm8941: add resin support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/4] ARM: dts: qcom: apq8074-dragonboard: add resin
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/4] power: reset: qcom-pon: add support for pm8941-pon
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/4] ARM: dts: qcom: apq8074-dragonboard: enable resin device
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• 回复: [PATCH v4] bus: mhi: host: pci_generic: Add support for quectel's new EM160R-GL product
  • From: Duke Xin(辛安文) <duke.xin@xxxxxxxxxxx>
• [pull] drm/msm: drm-msm-fixes-2023-06-08 for v6.4-rc6 [resend]
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [Freedreno] [PATCH v5 2/5] drm/msm/dsi: Adjust pclk rate for compression
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v5 2/5] drm/msm/dsi: Adjust pclk rate for compression
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v9 0/2] power: supply: introduce support for the Qualcomm smb2 charger
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: Adreno devfreq lockdep splat with 6.3-rc2
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v6 12/12] iommu/arm-smmu-qcom: Add SM6350 DPU compatible
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v6 11/12] iommu/arm-smmu-qcom: Add SM6375 DPU compatible
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v6 10/12] iommu/arm-smmu-qcom: Sort the compatible list alphabetically
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v8 01/18] dt-bindings: display/msm: gpu: Document GMU wrapper-equipped A6xx
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 01/18] dt-bindings: display/msm: gpu: Document GMU wrapper-equipped A6xx
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/5] drm/msm/dsi: Adjust pclk rate for compression
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/1] Categorize ARM dts directory
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sa8540p-ride: Specify ethernet phy OUI
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [RFC PATCH v2 12/13] drm/msm/dpu: add support for virtual planes
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH RFC 07/10] dt-bindings: display: panel: Describe Samsung SOFEF03-M Display-IC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: qcom-cci:Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 08/10] HID: i2c-hid: Support being a panel follower
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v6 8/9] PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: qcom,tcsr: add the compatible for IPQ8074
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 00/53] drm: Convert to platform remove callback returning void
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] bus: mhi: host: pci_generic: Add support for quectel's new EM160R-GL product
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm: dts: qcom: sdx55: Add interconnect path
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: power: reset: qcom-pon: define pm8941-pon
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: pm8008: fix module autoloading
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] mfd: pm8008: drop bogus i2c module alias
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/4] video: backlight: lp855x: get PWM for PWM mode during probe
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: misc: qcom,fastrpc: drop unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 08/10] HID: i2c-hid: Support being a panel follower
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 08/10] HID: i2c-hid: Support being a panel follower
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 00/10] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] soundwire: qcom: stablity fixes
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: Adreno devfreq lockdep splat with 6.3-rc2
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 4/5] mtd: rawnand: qcom: Add support for read, write, erase exec_ops
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: reserved-memory: Add alloc-{bottom-up,top-down}
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/5] mtd: rawnand: qcom: Add support for reset, readid, status exec_op
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 0/4] soundwire: qcom: stablity fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v3 5/6] arm64: dts: qcom: sc8280xp: add resets for soundwire controllers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 6/6] arm64: defconfig: Enable sc828x0xp lpasscc clock controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 4/6] clk: qcom: Add lpass audio clock controller driver for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 0/6] clk: qcom: sc8280xp: add lpasscc reset control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 3/6] clk: qcom: Add lpass clock controller driver for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 1/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/4] soundwire: qcom: stablity fixes
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 0/4] soundwire: qcom: stablity fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH V2 12/13] arm64: dts: qcom: ipq5018: Add RDP432-c1 board support
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v8 01/11] dt-bindings: dma: Add support for SM6115 and QCM2290 SoCs
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [v9 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [v9 6/8] dt-bindings: scm: Add compatible for IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [v9 7/8] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [v9 5/8] dt-bindings: qcom: Add ipq5018 bindings
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [v9 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [v9 3/8] dt-bindings: pinctrl: qcom: Add support for ipq5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [v9 1/8] dt-bindings: arm64: Add IPQ5018 clock and reset
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• [v9 0/8] Add minimal boot support for IPQ5018
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [RESEND PATCH v1 2/2] misc: fastrpc: detect privileged processes based on group ID
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: tidy up some error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v13 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RESEND PATCH v1 0/2] Privileged process support on remote subsystem
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [RESEND PATCH v1 2/2] misc: fastrpc: detect privileged processes based on group ID
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] media: videobuf2: Add a module param to limit vb2 queue buffer storage
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v2 7/8] arm64: dts: qcom: sm8550-mtp: add pmic glink port/endpoints
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 8/8] arm64: dts: qcom: sm8550-qrd: add pmic glink port/endpoints
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/8] media: videobuf2: Add a module param to limit vb2 queue buffer storage
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [RESEND PATCH v1 0/2] Privileged process support on remote subsystem
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] soundwire: qcom: stablity fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v14 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [RESEND PATCH v1 0/2] Privileged process support on remote subsystem
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: add WSA8845 speakers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sm8550-qrd: add WSA8845 speakers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4] bus: mhi: host: pci_generic: Add support for quectel's new EM160R-GL product
  • From: Duke Xin(辛安文) <duke_xinanwen@xxxxxxx>
• [PATCH v13 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: idle-states: Add idle-state-disabled property
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: tidy up some error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 2/2] cpuidle: dt: Add support to keep idle state disabled
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: cpu: idle-states: Add idle-state-disabled property
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: idle-states: Add idle-state-disabled property
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• [PATCH 0/2] Add provision to keep idle state disabled
  • From: Tushar Nimkar <quic_tnimkar@xxxxxxxxxxx>
• [PATCH 2/2] ASoC: codecs: wsa884x: Add WSA884x family of speakers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 05/12] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 3/3] arm64: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: arm: Add support for Coresight dummy trace
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [PATCH v6 1/3] Coresight: Add coresight dummy driver
  • From: Hao Zhang <quic_hazha@xxxxxxxxxxx>
• Re: [PATCH v2 00/10] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v2 08/10] HID: i2c-hid: Support being a panel follower
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 10/12] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 12/12] ARM: dts: qcom: apq8064: Drop redundant /smd node
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 06/12] soc: qcom: smem: Add qcom_smem_is_available()
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 09/12] arm64: dts: qcom: Add rpm-proc node for SMD platforms
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 08/12] soc: qcom: Add RPM processor/subsystem driver
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 11/12] ARM: dts: qcom: Add rpm-proc node for SMD platforms
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 05/12] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 04/12] soc: qcom: smd-rpm: Match rpmsg channel instead of compatible
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 07/12] rpmsg: qcom_smd: Use qcom_smem_is_available()
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 03/12] dt-bindings: soc: qcom: smd-rpm: Add some more compatibles
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 02/12] dt-bindings: soc: qcom: smd-rpm: Add MSM8909 to qcom,smd-channels
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 00/12] Add dedicated device tree node for RPM processor/subsystem
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 01/12] dt-bindings soc: qcom: smd-rpm: Fix sort order
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 08/10] HID: i2c-hid: Support being a panel follower
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 0/5] arm64: qcom: sa8775p: add support for UFS
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v6 00/12] SM63(50|75) DPU support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: tidy up some error checking
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v17] drm/msm/dpu: add DSC blocks to the catalog of MSM8998
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: tidy up some error checking
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v17] drm/msm/dpu: add DSC blocks to the catalog of MSM8998
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/dpu: use PINGPONG_NONE to unbind INTF from PP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 00/12] SM63(50|75) DPU support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v2 12/13] drm/msm/dpu: add support for virtual planes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/10] arm64: dts: qcom: sc7180: Link trogdor touchscreens to the panels
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 09/10] HID: i2c-hid: Do panel follower work on the system_wq
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 08/10] HID: i2c-hid: Support being a panel follower
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 04/10] of: property: fw_devlink: Add a devlink for panel followers
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 03/10] drm/panel: Add a way for other devices to follow panel state
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 07/10] HID: i2c-hid: Make suspend and resume into helper functions
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 05/10] HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 06/10] HID: i2c-hid: Rearrange probe() to power things up later
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 02/10] drm/panel: Check for already prepared/enabled in drm_panel
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed touchscreens
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 00/10] drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v6 8/9] PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC PATCH v2 12/13] drm/msm/dpu: add support for virtual planes
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v3 6/7] drm/msm/dsi: Add phy configuration for MSM8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH] dt-bindings: misc: qcom,fastrpc: drop unneeded quotes
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 8/9] PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH -next] PCI: endpoint: Remove redundant dev_err().
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcm2290: Add CPU idle states
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v3 6/7] drm/msm/dsi: Add phy configuration for MSM8226
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [PATCH v3 13/15] arm64: dts: qcom: sc8180x: Add pmics
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v12 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND PATCH v1 0/2] Privileged process support on remote subsystem
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v1 2/2] misc: fastrpc: detect privileged processes based on group ID
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: ipq8074: add critical thermal trips
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [RESEND PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: misc: qcom,fastrpc: drop unneeded quotes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v6 04/12] dt-bindings: display/msm: Add SM6350 MDSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2 1/2] net: Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] net: Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] net: Add MHI Endpoint network driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 1/2] net: Add MHI Endpoint network driver
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION abbd8bb42915d9ed06df11b430bf4ecb3d8ac5ad
  • From: kernel test robot <lkp@xxxxxxxxx>
• [RESEND PATCH v1 2/2] misc: fastrpc: detect privileged processes based on group ID
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [RESEND PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [RESEND PATCH v1 0/2] Privileged process support on remote subsystem
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] MAINTAINERS: Add entry for MHI networking drivers under MHI bus
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] net: Add MHI Endpoint network driver
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer for non-uart modes
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v2 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v2 2/3] arm: dts: qcom: sdx55: Add interconnect path
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH] soundwire: qcom: fix storing port config out-of-bounds
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 14/24] virt: gunyah: Add Qualcomm Gunyah platform ops
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v13 10/24] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH] Revert "arm64: dts: qcom: sa8540p-ride: enable pcie2a node"
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• [PATCH v2 2/2] MAINTAINERS: Add entry for MHI networking drivers under MHI bus
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 1/2] net: Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v2 0/2] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/3] net: mhi: Increase the default MTU from 16K to 32K
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: tidy up some error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] soundwire: qcom: fix storing port config out-of-bounds
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 5/6] arm64: dts: qcom: sc8280xp: add resets for soundwire controllers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: clock: Add YAML schemas for LPASS AUDIOCC and reset on SC8280XP
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] soundwire: qcom: fix storing port config out-of-bounds
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/2] spi-geni-qcom: Add new interfaces and utilise them to do map/unmap in framework for SE DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 3/3] net: mhi: Increase the default MTU from 16K to 32K
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 3/5] i2c: qcom-cci:Use devm_platform_get_and_ioremap_resource()
  • From: Robert Foss <rfoss@xxxxxxxxxx>
• [PATCH 2/2] rpmsg: glink: change intent work queue type
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 1/2] rpmsg: glink: change rx work queue type
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 0/2] change glink work queue type
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v1 2/2] misc: fastrpc: detect privileged processes based on group ID
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: misc: fastrpc: add fastrpc group IDs property
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 0/2] Privileged process support on remote subsystem
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 1/5] dt-bindings: arm: qcom: Document SDX75 platform and boards
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 3/5] dt-bindings: interrupt-controller: Add SDX75 PDC compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 0/5] Add devicetree support for SDX75 Modem and IDP
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 2/5] dt-bindings: firmware: scm: Add compatible for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v3 4/5] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] net: Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 1/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• 回复: [PATCH v6] bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem
  • From: Duke Xin(辛安文) <duke.xin@xxxxxxxxxxx>
• [PATCH 0/9] Enable IPQ5332 USB2
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v5 1/6] thermal: qcom: tsens: Drop unused legacy structs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 8/9] arm64: dts: qcom: ipq5332: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v5 6/6] thermal: qcom: tsens-v0_1: Add MSM8909 data
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v5 5/6] dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v5 4/6] dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v5 3/6] thermal: qcom: tsens-v0_1: Add mdm9607 correction offsets
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v5 0/6] thermal: qcom: tsens: Fix MDM9607, add MSM8909
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v5 2/6] thermal: qcom: tsens-v0_1: Fix mdm9607 slope values
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• [PATCH v5 1/6] thermal: qcom: tsens: Drop unused legacy structs
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: qcom-cci:Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/4] soundwire: qcom: stablity fixes
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH -next] PCI: endpoint: Remove redundant dev_err().
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 2/3] arm64: dts: qcom: ipq9574: add tsens node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v6 0/3] Enable IPQ9574 TSENS support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RFC 1/4] dt-bindings: input: document Goodix Berlin Touchscreen IC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/14] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] net: mhi: Increase the default MTU from 16K to 32K
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH 1/3] net: Add MHI Endpoint network driver
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v2 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 8/8] arm64: dts: qcom: sm8550-qrd: add pmic glink port/endpoints
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 7/8] arm64: dts: qcom: sm8550-mtp: add pmic glink port/endpoints
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 6/8] arm64: dts: qcom: sm8550: add ports subnodes in usb/dp qmpphy node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 4/8] qcom: pmic_glink_altmode: add retimer-switch support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 3/8] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/8] soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/8] arm64: qcom: add Type-C Altmode support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver bindings
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v2 0/2] typec: add support for the ON Semiconductor nb7vpq904m Type-C Linear Redriver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 3/3] net: mhi: Increase the default MTU from 16K to 32K
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Collect driver-remote processor transaction logs
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH V23 0/3] misc: Add driver support for Data Capture and Compare unit(DCC)
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH v5 3/4] ARM: dts: qcom: msm8960: Add USB node
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v5 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v5 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v5 0/4] Samsung Galaxy Express SGH-I437 Support
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH V2] firmware: qcom_scm: use the SCM_CONVENTION based on ARM / ARM64
  • From: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] spi-geni-qcom: Add new interfaces and utilise them to do map/unmap in framework for SE DMA
  • From: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: qcm2290: Add CPU idle states
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v17] drm/msm/dpu: add DSC blocks to the catalog of MSM8998
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm2290: Add CPU idle states
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH v2 10/13] drm/msm/dpu: add list of supported formats to the DPU caps
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 04/13] drm/msm/dpu: remove unused fields from dpu_encoder_virt
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 04/13] drm/msm/dpu: remove unused fields from dpu_encoder_virt
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 09/13] drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm2290: Add CPU idle states
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [Freedreno] [RFC PATCH v2 04/13] drm/msm/dpu: remove unused fields from dpu_encoder_virt
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: tidy up some error checking
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v17] drm/msm/dpu: add DSC blocks to the catalog of MSM8998
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v17] drm/msm/dpu: add DSC blocks to the catalog of MSM8998
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: tidy up some error checking
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v17] drm/msm/dpu: add DSC blocks to the catalog of MSM8998
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v16] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v3 5/7] drm/msm/dsi: Add configuration for MSM8226
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH v3 4/7] drm/msm/mdp5: Add MDP5 configuration for MSM8226
  • From: Jeykumar Sankaran <quic_jeykumar@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/2] Input: pm8941-powerkey - fix debounce on gen2+ PMICs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] MAINTAINERS: Adjust Qualcomm driver globbing
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v16] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v16] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH RFC 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH RFC 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v16] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH RFC 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] spi-geni-qcom: Add new interfaces and utilise them to do map/unmap in framework for SE DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1] misc: fastrpc: Collect driver-remote processor transaction logs
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcm2290: Add USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 07/18] drm/msm/a6xx: Add a helper for software-resetting the GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v8 06/18] drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH v1] misc: fastrpc: Collect driver-remote processor transaction logs
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcm2290: Add CPU idle states
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/15] PCI: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Freedreno] [PATCH v8 11/18] drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v8 05/18] drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH RFC 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v8 04/18] drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH RFC 4/4] input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH RFC 2/4] input: touchscreen: add core support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH RFC 3/4] input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH RFC 0/4] input: touchscreen: add initial support for Goodix Berlin touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH RFC 1/4] dt-bindings: input: document Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 3/3] net: mhi: Increase the default MTU from 16K to 32K
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH v2 2/2] soc: qcom: socinfo: Add support for new fields in revision 19
  • From: Naman Jain <quic_namajain@xxxxxxxxxxx>
• [PATCH v2 1/2] soc: qcom: socinfo: Add support for new fields in revision 18
  • From: Naman Jain <quic_namajain@xxxxxxxxxxx>
• [PATCH v2 0/2] qcom: socinfo: Add v18, v19 support
  • From: Naman Jain <quic_namajain@xxxxxxxxxxx>
• Re: [PATCH v13 09/24] gunyah: rsc_mgr: Add RPC for sharing memory
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v5 2/3] arm64: dts: qcom: ipq9574: add tsens node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 11/11] coresight-tpdm: Add nodes for dsb msr support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH 0/3] Add MHI Endpoint network driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH V2 1/2] arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 0/2] Add support for GPIO based leds and buttons
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v13 08/24] gunyah: vm_mgr: Introduce basic VM Manager
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sdm630: Add support for modem remoteproc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v13 07/24] gunyah: rsc_mgr: Add VM lifecycle RPC
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v13 06/24] gunyah: rsc_mgr: Add resource manager RPC core
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v6 10/12] iommu/arm-smmu-qcom: Sort the compatible list alphabetically
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 06/12] drm/msm/dpu: Add SM6350 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 00/12] SM63(50|75) DPU support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 09/12] drm/msm: mdss: Add SM6375 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 11/12] iommu/arm-smmu-qcom: Add SM6375 DPU compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 01/12] dt-bindings: display/msm: dsi-controller-main: Add SM6350
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 08/12] drm/msm/dpu: Add SM6375 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 07/12] drm/msm: mdss: Add SM6350 support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 04/12] dt-bindings: display/msm: Add SM6350 MDSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 02/12] dt-bindings: display/msm: dsi-controller-main: Add SM6375
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 03/12] dt-bindings: display/msm: sc7180-dpu: Describe SM6350 and SM6375
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 12/12] iommu/arm-smmu-qcom: Add SM6350 DPU compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] net: mhi: Increase the default MTU from 16K to 32K
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/3] net: Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 2/3] MAINTAINERS: Add entry for MHI networking drivers under MHI bus
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/3] Add MHI Endpoint network driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V2 06/13] clk: qcom: ipq5018: remove q6 bring up clocks
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 6/7] PCI: epf-mhi: Use iATU for small transfers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 5/7] PCI: epf-mhi: Add support for SM8450
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 7/7] PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 4/7] PCI: epf-mhi: Add eDMA support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 3/7] PCI: qcom-ep: Add eDMA support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 2/7] PCI: epf-mhi: Make use of the alignment restriction from EPF core
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/7] PCI: qcom-ep: Pass alignment restriction to the EPF core
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/7] Improvements to Qcom PCIe EP and EPF MHI drivers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v6] bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on IPQ5332 family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3] bus: mhi: host: pci_generic: Add support for quectel's new EM160R-GL product
  • From: Duke Xin(辛安文) <duke_xinanwen@xxxxxxx>
• Re: [PATCH v4 09/11] coresight-tpdm: Add nodes for timestamp request
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: socinfo: Add support for new fields in revision 18
  • From: Naman Jain <quic_namajain@xxxxxxxxxxx>
• [PATCH v6] bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem
  • From: Duke Xin(辛安文) <duke_xinanwen@xxxxxxx>
• Re: [PATCH v5 0/3] Enable IPQ9574 TSENS support
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: socinfo: Add support for new fields in revision 18
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/dp: set self refresh aware based on PSR support"
  • From: "Linux regression tracking #adding (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Split sdm845-db845c to add headless support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant
  • From: Hariharan K <quic_harihk@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on IPQ5332 family
  • From: Hariharan K <quic_harihk@xxxxxxxxxxx>
• [PATCH 0/2] Add initial support for RDP446 of IPQ5332 family
  • From: Hariharan K <quic_harihk@xxxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 10/10] arm64: dts: qcom: Add the support of cpufreq on SDX75
  • From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Split sdm845-db845c to add headless support
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 06/14] dt-bindings: soc: qcom: smd-rpm: Use qcom,rpm-proc in example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/14] dt-bindings: soc: qcom: smd-rpm: Use qcom,rpm-proc in example
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 05/14] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] PCI: endpoint: epf-mhi: Fix the outbound window offset handling
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: tidy up some error checking
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v8 01/11] dt-bindings: dma: Add support for SM6115 and QCM2290 SoCs
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• Re: [PATCH v2 08/10] arm64: dts: qcom: Add QUPv3 UART console node for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH] PCI: endpoint: epf-mhi: Fix the outbound window offset handling
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 07/10] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 06/14] dt-bindings: soc: qcom: smd-rpm: Use qcom,rpm-proc in example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/14] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 08/10] arm64: dts: qcom: Add QUPv3 UART console node for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• Re: [PATCH 03/14] dt-bindings: soc: qcom: smd-rpm: Add some more compatibles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/14] dt-bindings: soc: qcom: smd-rpm: Add MSM8909 to qcom,smd-channels
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/14] dt-bindings soc: qcom: smd-rpm: Fix sort order
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Split sdm845-db845c to add headless support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Split sdm845-db845c to add headless support
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH v2 09/10] arm64: dts: qcom: Enable the QUPv3 UART console for SDX75
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 08/10] arm64: dts: qcom: Add QUPv3 UART console node for SDX75
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 05/10] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] PCI: qcom-ep: Add ICC bandwidth voting support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v2 05/10] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v4 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v4 3/4] ARM: dts: qcom: msm8960: Add USB node
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• [PATCH v4 0/4] Samsung Galaxy Express SGH-I437 Support
  • From: Rudraksha Gupta <guptarud@xxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  • From: "Rudraksha Gupta" <guptarud@xxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: phy: qcom,usb-hs-phy: Add compatible
  • From: "Rudraksha Gupta" <guptarud@xxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: re-introduce dpu core revision to the catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v15] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v15] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v15] drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v13 05/24] mailbox: Add Gunyah message queue mailbox
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v13 04/24] virt: gunyah: msgq: Add hypercalls to send and receive messages
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v13 02/24] gunyah: Common types and error codes for Gunyah hypercalls
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 10/14] soc: qcom: Add RPM processor/subsystem driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 10/14] soc: qcom: Add RPM processor/subsystem driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 12/14] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 10/14] soc: qcom: Add RPM processor/subsystem driver
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v13 24/24] MAINTAINERS: Add Gunyah hypervisor drivers section
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 21/24] virt: gunyah: Add hypercalls for sending doorbell
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 23/24] virt: gunyah: Add ioeventfd
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 22/24] virt: gunyah: Add irqfd interface
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 20/24] virt: gunyah: Add proxy-scheduled vCPUs
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 19/24] virt: gunyah: Add IO handlers
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 18/24] virt: gunyah: Add resource tickets
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 17/24] gunyah: vm_mgr: Add framework for VM Functions
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 16/24] virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 15/24] docs: gunyah: Document Gunyah VM Manager
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 14/24] virt: gunyah: Add Qualcomm Gunyah platform ops
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 13/24] gunyah: rsc_mgr: Add platform ops on mem_lend/mem_reclaim
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 12/24] samples: Add sample userspace Gunyah VM Manager
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 10/24] gunyah: vm_mgr: Add/remove user memory regions
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 11/24] gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 09/24] gunyah: rsc_mgr: Add RPC for sharing memory
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 08/24] gunyah: vm_mgr: Introduce basic VM Manager
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 07/24] gunyah: rsc_mgr: Add VM lifecycle RPC
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 06/24] gunyah: rsc_mgr: Add resource manager RPC core
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 05/24] mailbox: Add Gunyah message queue mailbox
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 04/24] virt: gunyah: msgq: Add hypercalls to send and receive messages
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 03/24] virt: gunyah: Add hypercalls to identify Gunyah
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 02/24] gunyah: Common types and error codes for Gunyah hypercalls
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 01/24] dt-bindings: Add binding for gunyah hypervisor
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v13 00/24] Drivers for Gunyah hypervisor
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH 09/14] rpmsg: qcom_smd: Use qcom_smem_is_available()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 12/14] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: use dev_err_probe() where appropriate
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 09/14] rpmsg: qcom_smd: Use qcom_smem_is_available()
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 08/14] soc: qcom: smem: Add qcom_smem_is_available()
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 11/14] arm64: dts: qcom: Add rpm-proc node for SMD platforms
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 10/14] soc: qcom: Add RPM processor/subsystem driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 14/14] ARM: dts: qcom: apq8064: Drop redundant /smd node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 09/14] rpmsg: qcom_smd: Use qcom_smem_is_available()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 08/14] soc: qcom: smem: Add qcom_smem_is_available()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 04/14] soc: qcom: smd-rpm: Match rpmsg channel instead of compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v2 2/2] phy: qcom-snps-femto-v2: add system sleep PM ops
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• [PATCH v2 0/2] Clock fixes for qcom-snps-femto-v2 PHY driver
  • From: Adrien Thierry <athierry@xxxxxxxxxx>
• Re: [PATCH v2 07/10] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 10/10] arm64: dts: qcom: Add the support of cpufreq on SDX75
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 08/10] arm64: dts: qcom: Add QUPv3 UART console node for SDX75
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 07/10] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 05/12] dt-bindings: display/msm: Add SM6375 MDSS
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/8] Add devicetree support for SDX75 Modem and IDP
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH 0/2] SM6375 GPU SMMU
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH] perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH v4 0/5] arm64: dts: qcom: sa8775p: add more IOMMUs
  • From: Will Deacon <will@xxxxxxxxxx>
• [PATCH v2 08/10] arm64: dts: qcom: Add QUPv3 UART console node for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 04/10] dt-bindings: arm-smmu: Add SDX75 SMMU compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 10/10] arm64: dts: qcom: Add the support of cpufreq on SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 09/10] arm64: dts: qcom: Enable the QUPv3 UART console for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: firmware: scm: Add compatible for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 00/10] Add devicetree support for SDX75 Modem and IDP
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 06/10] arm64: dts: qcom: Add SDX75 platform and IDP board support
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 05/10] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: arm: qcom: Document SDX75 platform and boards
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 03/10] dt-bindings: interrupt-controller: Add SDX75 PDC compatible
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
• [PATCH v2 07/10] arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
  • From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>