Hi, Changes in v2: - Added the CPUFreq support patch. - Collected the Acked by tags. - Addressed some minor comments from Konrad. This series adds devicetree support for Qualcomm SDX75 platform and IDP board. This series functionally depends on GCC and RPMh Clock support series [1], and pinctrl support for SDX75 [2] which are under review. With this current devicetree support, the IDP can boot into initramfsshell. [1] https://lore.kernel.org/lkml/20230419133013.2563-3-quic_tdas@xxxxxxxxxxx/ [2] https://lore.kernel.org/all/1684409015-25196-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ Thanks, Rohit. Imran Shaik (1): arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75 Rohit Agarwal (9): dt-bindings: arm: qcom: Document SDX75 platform and boards dt-bindings: firmware: scm: Add compatible for SDX75 dt-bindings: interrupt-controller: Add SDX75 PDC compatible dt-bindings: arm-smmu: Add SDX75 SMMU compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible arm64: dts: qcom: Add SDX75 platform and IDP board support arm64: dts: qcom: Add QUPv3 UART console node for SDX75 arm64: dts: qcom: Enable the QUPv3 UART console for SDX75 arm64: dts: qcom: Add the support of cpufreq on SDX75 Documentation/devicetree/bindings/arm/qcom.yaml | 7 + .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 1 + .../devicetree/bindings/firmware/qcom,scm.yaml | 1 + .../bindings/interrupt-controller/qcom,pdc.yaml | 1 + .../devicetree/bindings/iommu/arm,smmu.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sdx75-idp.dts | 33 ++ arch/arm64/boot/dts/qcom/sdx75.dtsi | 647 +++++++++++++++++++++ 8 files changed, 692 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi -- 2.7.4
