On 5.06.2023 07:29, Sridharan S N wrote:
> Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35.
>
> Signed-off-by: Sridharan S N <quic_sridsn@xxxxxxxxxxx>
> ---
> Changes in V2:
> - Used the hypen in node name instead of underscore
> - Dropped the status property
>
> arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts | 42 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts | 42 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 42 +++++++++++++++++++++
> 3 files changed, 126 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> index 3af1d5556950..5bd4ff3ad86b 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
> @@ -7,6 +7,8 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> #include "ipq5332.dtsi"
>
> / {
> @@ -20,6 +22,32 @@
> chosen {
> stdout-path = "serial0";
> };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
> +
> + button-wps {
> + label = "wps";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
> + linux,input-type = <1>;
> + debounce-interval = <60>;
> + };
> + };
All of these changes seem very repetetive.. Are these devboards based
on a common design? Maybe ipq5332-rdp-common.dtsi would be beneficial
here?
Konrad
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&gpio_leds_default>;
> + pinctrl-names = "default";
> +
> + led-0 {
> + gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "phy0tx";
> + default-state = "off";
> + };
> + };
> };
>
> &blsp1_uart0 {
> @@ -57,6 +85,20 @@
> /* PINCTRL */
>
> &tlmm {
> + gpio_keys_default: gpio-keys-default-state {
> + pins = "gpio35";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + gpio_leds_default: gpio-leds-default-state {
> + pins = "gpio36";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-down;
> + };
> +
> i2c_1_pins: i2c-1-state {
> pins = "gpio29", "gpio30";
> function = "blsp1_i2c0";
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
> index bcf3b31c20e3..36cbebb75c48 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
> @@ -7,6 +7,8 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> #include "ipq5332.dtsi"
>
> / {
> @@ -20,6 +22,32 @@
> chosen {
> stdout-path = "serial0";
> };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
> +
> + button-wps {
> + label = "wps";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
> + linux,input-type = <1>;
> + debounce-interval = <60>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&gpio_leds_default>;
> + pinctrl-names = "default";
> +
> + led-0 {
> + gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "phy0tx";
> + default-state = "off";
> + };
> + };
> };
>
> &blsp1_uart0 {
> @@ -71,6 +99,20 @@
> /* PINCTRL */
>
> &tlmm {
> + gpio_keys_default: gpio-keys-default-state {
> + pins = "gpio35";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + gpio_leds_default: gpio-leds-default-state {
> + pins = "gpio36";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-down;
> + };
> +
> i2c_1_pins: i2c-1-state {
> pins = "gpio29", "gpio30";
> function = "blsp1_i2c0";
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
> index 3b6a5cb8bf07..2d27f48f00c0 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
> @@ -7,6 +7,8 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> #include "ipq5332.dtsi"
>
> / {
> @@ -20,6 +22,32 @@
> chosen {
> stdout-path = "serial0";
> };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
> +
> + button-wps {
> + label = "wps";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
> + linux,input-type = <1>;
> + debounce-interval = <60>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&gpio_leds_default>;
> + pinctrl-names = "default";
> +
> + led-0 {
> + gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "phy0tx";
> + default-state = "off";
> + };
> + };
> };
>
> &blsp1_uart0 {
> @@ -64,6 +92,20 @@
> /* PINCTRL */
>
> &tlmm {
> + gpio_keys_default: gpio-keys-default-state {
> + pins = "gpio35";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + gpio_leds_default: gpio-leds-default-state {
> + pins = "gpio36";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-down;
> + };
> +
> sdc_default_state: sdc-default-state {
> clk-pins {
> pins = "gpio13";
