Re: [PATCH 3/3] net: mhi: Increase the default MTU from 16K to 32K

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/6/2023 6:31 AM, Manivannan Sadhasivam wrote:
Most of the Qualcomm endpoint devices are supporting 32K MTU for the
UL (Uplink) and DL (Downlink) channels. So let's use the same value
in the MHI NET driver also. This gives almost 2x increase in the throughput
for the UL channel.

Below is the comparision:

iperf on the UL channel with 16K MTU:

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec   353 MBytes   296 Mbits/sec

iperf on the UL channel with 32K MTU:

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec   695 MBytes   583 Mbits/sec

Cc: Loic Poulain <loic.poulain@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
  drivers/net/mhi_net.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
index 3d322ac4f6a5..eddc2c701da4 100644
--- a/drivers/net/mhi_net.c
+++ b/drivers/net/mhi_net.c
@@ -14,7 +14,7 @@
#define MHI_NET_MIN_MTU ETH_MIN_MTU
  #define MHI_NET_MAX_MTU		0xffff
-#define MHI_NET_DEFAULT_MTU	0x4000
+#define MHI_NET_DEFAULT_MTU	0x8000

Why not SZ_32K?



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux