Re: [PATCH v3 2/5] mtd: rawnand: qcom: Add support for reset, readid, status exec_op

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

quic_mdalam@xxxxxxxxxxx wrote on Wed, 31 May 2023 18:19:50 +0530:

> This change will add exec_ops support for RESET , READ_ID, STATUS
> command.

Imperative form here and after in your commit log please.

Add support for...

Minor comments below, otherwise looks good.

> 
> Co-developed-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> ---
> Change in [v3]
> 
> * Updated q_op->flag in qcom_op_cmd_mapping() with OP_PROGRAM_PAGE
>   instead NAND_CMD_PAGEPROG
> 
> * Change the if condition check for exec_opwrite into single line check.
> 
> * Added error check
> 
> * Removed check for NAND_CMD_RESET, NAND_CMD_READID from pre_command.
> 
> Change in [v2]
> 
> * Missed to post Cover-letter, so posting v2 patch with cover-letter
> 
> Change in [v1]
> 
> * Added initial support for exec_ops.
>    
>  drivers/mtd/nand/raw/qcom_nandc.c | 218 +++++++++++++++++++++++++++++-
>  1 file changed, 215 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 6a83cd86a12d..659ba923b68a 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -385,6 +385,9 @@ struct nandc_regs {
>   * @reg_read_pos:		marker for data read in reg_read_buf
>   *
>   * @cmd1/vld:			some fixed controller register values
> + *
> + * @exec_opwrite:		flag to select correct number of code word
> + *				while reading status
>   */
>  struct qcom_nand_controller {
>  	struct device *dev;
> @@ -435,6 +438,7 @@ struct qcom_nand_controller {
>  	int reg_read_pos;
>  
>  	u32 cmd1, vld;
> +	bool exec_opwrite;
>  };
>  
>  /*
> @@ -1542,8 +1546,7 @@ static void pre_command(struct qcom_nand_host *host, int command)
>  
>  	clear_read_regs(nandc);
>  
> -	if (command == NAND_CMD_RESET || command == NAND_CMD_READID ||
> -	    command == NAND_CMD_PARAM || command == NAND_CMD_ERASE1)
> +	if (command == NAND_CMD_PARAM || command == NAND_CMD_ERASE1)
>  		clear_bam_transaction(nandc);
>  }
>  
> @@ -2920,6 +2923,8 @@ static int qcom_op_cmd_mapping(struct qcom_nand_controller *nandc, u8 cmd,
>  		break;
>  	case NAND_CMD_PAGEPROG:
>  		ret = OP_PROGRAM_PAGE;
> +		q_op->flag = OP_PROGRAM_PAGE;
> +		nandc->exec_opwrite = true;
>  		break;
>  	default:
>  		break;
> @@ -2982,6 +2987,212 @@ static void qcom_parse_instructions(struct nand_chip *chip,
>  	}
>  }
>  
> +static void qcom_delay_ns(unsigned int ns)
> +{
> +	if (!ns)
> +		return;
> +
> +	if (ns < 10000)
> +		ndelay(ns);
> +	else
> +		udelay(DIV_ROUND_UP(ns, 1000));
> +}
> +
> +static int qcom_wait_rdy_poll(struct nand_chip *chip, unsigned int time_ms)
> +{
> +	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	unsigned long start = jiffies + msecs_to_jiffies(time_ms);
> +	u32 flash;
> +
> +	nandc_read_buffer_sync(nandc, true);
> +
> +	do {
> +		flash = le32_to_cpu(nandc->reg_read_buf[0]);
> +		if (flash & FS_READY_BSY_N)
> +			return 0;
> +		cpu_relax();
> +	} while (time_after(start, jiffies));
> +
> +	dev_err(nandc->dev, "Timeout waiting for device to be ready:0x%08x\n", flash);
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int qcom_read_status_exec(struct nand_chip *chip,
> +				 const struct nand_subop *subop)
> +{
> +	struct qcom_nand_host *host = to_qcom_nand_host(chip);
> +	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	struct nand_ecc_ctrl *ecc = &chip->ecc;
> +	struct qcom_op q_op;
> +	const struct nand_op_instr *instr = NULL;
> +	unsigned int op_id = 0;
> +	unsigned int len = 0;
> +	int ret = 0, num_cw, i;
> +	u32 flash_status;
> +
> +	host->status = NAND_STATUS_READY | NAND_STATUS_WP;
> +
> +	qcom_parse_instructions(chip, subop, &q_op);
> +
> +	num_cw = nandc->exec_opwrite ? ecc->steps : 1;
> +	nandc->exec_opwrite = false;
> +
> +	nandc->buf_count = 0;
> +	nandc->buf_start = 0;
> +	host->use_ecc = false;
> +
> +	clear_read_regs(nandc);
> +	clear_bam_transaction(nandc);
> +
> +	nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
> +	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
> +
> +	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
> +	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> +	read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
> +
> +	ret = submit_descs(nandc);
> +	if (ret) {
> +		dev_err(nandc->dev, "failure in sbumitting status descriptor\n");

                                                 ^

Please run checkpatch.pl --strict

> +		free_descs(nandc);
> +		goto err_out;
> +	}
> +	free_descs(nandc);
> +
> +	nandc_read_buffer_sync(nandc, true);
> +
> +	for (i = 0; i < num_cw; i++) {
> +		flash_status = le32_to_cpu(nandc->reg_read_buf[i]);
> +
> +	if (flash_status & FS_MPU_ERR)
> +		host->status &= ~NAND_STATUS_WP;
> +
> +	if (flash_status & FS_OP_ERR || (i == (num_cw - 1) &&
> +					 (flash_status & FS_DEVICE_STS_ERR)))

  	if (flash_status & FS_OP_ERR ||
	    (i == (num_cw - 1) && (flash_status & FS_DEVICE_STS_ERR)))

looks more readable?

> +		host->status |= NAND_STATUS_FAIL;
> +	}
> +
> +	flash_status = host->status;
> +	instr = q_op.data_instr;
> +	op_id = q_op.data_instr_idx;
> +	len = nand_subop_get_data_len(subop, op_id);
> +	memcpy(instr->ctx.data.buf.in, &flash_status, len);
> +
> +err_out:
> +	return ret;
> +}
> +
> +static int qcom_read_id_type_exec(struct nand_chip *chip, const struct nand_subop *subop)
> +{
> +	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	struct qcom_nand_host *host = to_qcom_nand_host(chip);
> +	struct qcom_op q_op;
> +	const struct nand_op_instr *instr = NULL;
> +	unsigned int op_id = 0;
> +	unsigned int len = 0;
> +	int ret = 0;
> +
> +	qcom_parse_instructions(chip, subop, &q_op);
> +
> +	nandc->buf_count = 0;
> +	nandc->buf_start = 0;
> +	host->use_ecc = false;
> +
> +	clear_read_regs(nandc);
> +	clear_bam_transaction(nandc);
> +
> +	nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
> +	nandc_set_reg(chip, NAND_ADDR0, q_op.addr1_reg);
> +	nandc_set_reg(chip, NAND_ADDR1, q_op.addr2_reg);
> +	nandc_set_reg(chip, NAND_FLASH_CHIP_SELECT,
> +		      nandc->props->is_bam ? 0 : DM_EN);
> +
> +	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
> +
> +	write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
> +	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> +
> +	read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
> +
> +	ret = submit_descs(nandc);
> +	if (ret) {
> +		dev_err(nandc->dev, "failure in sbumitting read id descriptor\n");
> +		free_descs(nandc);
> +		goto err_out;
> +	}
> +	free_descs(nandc);
> +
> +	instr = q_op.data_instr;
> +	op_id = q_op.data_instr_idx;
> +	len = nand_subop_get_data_len(subop, op_id);
> +
> +	nandc_read_buffer_sync(nandc, true);
> +	memcpy(instr->ctx.data.buf.in, nandc->reg_read_buf, len);
> +
> +err_out:
> +	return ret;
> +}
> +
> +static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_subop *subop)
> +{
> +	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	struct qcom_nand_host *host = to_qcom_nand_host(chip);
> +	struct qcom_op q_op;
> +	int ret = 0;
> +
> +	qcom_parse_instructions(chip, subop, &q_op);
> +
> +	if (q_op.flag == OP_PROGRAM_PAGE)
> +		goto wait_rdy;
> +
> +	nandc->buf_count = 0;
> +	nandc->buf_start = 0;
> +	host->use_ecc = false;
> +
> +	clear_read_regs(nandc);
> +	clear_bam_transaction(nandc);
> +
> +	nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
> +	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
> +
> +	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
> +	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> +
> +	read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
> +
> +	ret = submit_descs(nandc);
> +	if (ret) {
> +		dev_err(nandc->dev, "failure in sbumitting misc descriptor\n");
> +		free_descs(nandc);
> +		goto err_out;
> +	}
> +	free_descs(nandc);
> +
> +wait_rdy:
> +	qcom_delay_ns(q_op.rdy_delay_ns);
> +	ret = qcom_wait_rdy_poll(chip, q_op.rdy_timeout_ms);
> +
> +err_out:
> +	return ret;
> +}
> +
> +static const struct nand_op_parser qcom_op_parser = NAND_OP_PARSER(
> +		NAND_OP_PARSER_PATTERN(
> +			qcom_misc_cmd_type_exec,
> +			NAND_OP_PARSER_PAT_CMD_ELEM(false),
> +			NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
> +		NAND_OP_PARSER_PATTERN(
> +			qcom_read_id_type_exec,
> +			NAND_OP_PARSER_PAT_CMD_ELEM(false),
> +			NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYCLE),
> +			NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 8)),
> +		NAND_OP_PARSER_PATTERN(
> +			qcom_read_status_exec,
> +			NAND_OP_PARSER_PAT_CMD_ELEM(false),
> +			NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 1)),
> +		);
> +
>  static int qcom_check_op(struct nand_chip *chip,
>  			const struct nand_operation *op)
>  {
> @@ -3022,7 +3233,8 @@ static int qcom_nand_exec_op(struct nand_chip *chip,
>  	if (check_only)
>  		return qcom_check_op(chip, op);
>  
> -	return 0;
> +	return nand_op_parser_exec_op(chip, &qcom_op_parser,
> +			op, check_only);
>  }
>  
>  static const struct nand_controller_ops qcom_nandc_ops = {


Thanks,
Miquèl




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux