Re: [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/06/2023 13:56, Varadarajan Narayanan wrote:
Fix the USB related clock defines and add details
referenced by them

Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
  drivers/clk/qcom/gcc-ipq5332.c | 34 +++++++++++++++++++++++-----------
  1 file changed, 23 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index a75ab88..2b58558 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -351,6 +351,16 @@ static const struct freq_tbl ftbl_gcc_adss_pwm_clk_src[] = {
  	{ }
  };
+static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
+	{ .fw_name = "usb3phy_0_cc_pipe_clk" },
+	{ .fw_name = "xo" },

gcc-ipq5332 uses DT indices, please don't mix that with .fw_name.

+};
+
+static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
+	{ P_USB3PHY_0_PIPE, 0 },
+	{ P_XO, 2 },
+};
+
  static struct clk_rcg2 gcc_adss_pwm_clk_src = {
  	.cmd_rcgr = 0x1c004,
  	.mnd_width = 0,
@@ -1101,16 +1111,18 @@ static struct clk_rcg2 gcc_usb0_mock_utmi_clk_src = {
  	},
  };
-static struct clk_regmap_phy_mux gcc_usb0_pipe_clk_src = {
+static struct clk_regmap_mux usb0_pipe_clk_src = {
  	.reg = 0x2c074,
+	.shift = 8,
+	.width = 2,
+	.parent_map = gcc_usb3phy_0_cc_pipe_clk_xo_map,
  	.clkr = {
-		.hw.init = &(struct clk_init_data) {
-			.name = "gcc_usb0_pipe_clk_src",
-			.parent_data = &(const struct clk_parent_data) {
-				.index = DT_USB_PCIE_WRAPPER_PIPE_CLK,
-			},
-			.num_parents = 1,
-			.ops = &clk_regmap_phy_mux_ops,
+		.hw.init = &(const struct clk_init_data){
+			.name = "usb0phy_0_cc_pipe_clk_src",
+			.parent_data = gcc_usb3phy_0_cc_pipe_clk_xo,
+			.num_parents = 2,
+			.ops = &clk_regmap_mux_closest_ops,
+			.flags = CLK_SET_RATE_PARENT,
  		},

Soo... As you are reverting this. Is USB0 PIPE clock required to be parked to the XO? I was going to write 'before turning USB0_GDSC' off, but then I noticed that gcc-ipq5332 doesn't declare GDSCs. Does this platform have GDSCs?

  	},
  };
@@ -3041,8 +3053,8 @@ static struct clk_branch gcc_usb0_pipe_clk = {
  		.enable_mask = BIT(0),
  		.hw.init = &(const struct clk_init_data) {
  			.name = "gcc_usb0_pipe_clk",
-			.parent_hws = (const struct clk_hw*[]) {
-				&gcc_usb0_pipe_clk_src.clkr.hw,
+			.parent_names = (const char *[]){
+				"usb0_pipe_clk_src"

complete and definitive NAK. Do not use parent_names, we have just stopped migrating from them.

  			},
  			.num_parents = 1,
  			.flags = CLK_SET_RATE_PARENT,
@@ -3580,7 +3592,7 @@ static struct clk_regmap *gcc_ipq5332_clocks[] = {
  	[GCC_PCIE3X2_PIPE_CLK_SRC] = &gcc_pcie3x2_pipe_clk_src.clkr,
  	[GCC_PCIE3X1_0_PIPE_CLK_SRC] = &gcc_pcie3x1_0_pipe_clk_src.clkr,
  	[GCC_PCIE3X1_1_PIPE_CLK_SRC] = &gcc_pcie3x1_1_pipe_clk_src.clkr,
-	[GCC_USB0_PIPE_CLK_SRC] = &gcc_usb0_pipe_clk_src.clkr,
+	[GCC_USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
  };
static const struct qcom_reset_map gcc_ipq5332_resets[] = {

--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux