Linux for MIPS

• Thread Index

• [PATCH v7 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 12/24] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 09/24] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 07/24] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 04/24] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 03/24] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 02/24] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 01/24] mfd: Add ingenic-tcu.h header
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v7 00/24] TCU patchset v7
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/2] kbuild: Allow arch-specific asm/compiler.h
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: serdev: How to attach serdev devices to USB based tty devices?
  • From: Frank Kunz <mailinglists@xxxxxxxxxxxxxxxxx>
• WTS: Apple MacBook Pro, Apple iPad and WS-C3850-48P-S
  • From: "Refurbished Computers Depot" <refurbishedpc@xxxxxxxx>
• Re: serdev: How to attach serdev devices to USB based tty devices?
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v4] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Tobias Wolf <dev-NTEO@xxxxxxxxx>
• Re: [PATCH v3] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Tobias Wolf <t.wolf@xxxxxxxxx>
• Re: [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: "Naveen N. Rao" <naveen.n.rao@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [Skiboot] [PATCH] opal/hmi: Wakeup the cpu before reading core_fir
  • From: Nicholas Piggin <npiggin@xxxxxxxxx>
• Re: [PATCH v9 1/2] kbuild: Allow arch-specific asm/compiler.h
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v3] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v9 1/2] kbuild: Allow arch-specific asm/compiler.h
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v9 2/2] MIPS: Workaround GCC __builtin_unreachable reordering bug
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v9 0/2] MIPS: Override barrier_before_unreachable() to fix microMIPS
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v4 4/7] i2c: designware: document MSCC Ocelot bindings
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v8 1/2] kbuild: Allow asm-specific compiler_types.h
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v4 4/7] i2c: designware: document MSCC Ocelot bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v3] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Mathieu Malaterre <mathieu.malaterre@xxxxxxxxx>
• [PATCH v3] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Tobias Wolf <dev-NTEO@xxxxxxxxx>
• Re: [PATCH v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• [PATCH v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Tobias Wolf <t.wolf@xxxxxxxxx>
• [PATCH] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
  • From: Tobias Wolf <dev-NTEO@xxxxxxxxx>
• Re: [PATCH 08/23] mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooks
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH 08/23] mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 08/23] mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooks
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH v6 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [PATCH v6 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Michal Hocko <mhocko@xxxxxxxxxx>
• Re: [PATCH v6 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [PATCH v9 2/4] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v9 1/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 1/2] kbuild: Allow asm-specific compiler_types.h
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v9 4/4] perf probe: Support SDT markers having reference counter (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v9 3/4] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v9 1/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v9 2/4] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v9 0/4] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH] MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3
  • From: Tuomas Tynkkynen <tuomas.tynkkynen@xxxxxx>
• Re: [PATCH 08/23] mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 01/23] mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooks
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH v8 2/2] MIPS: Workaround GCC __builtin_unreachable reordering bug
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v8 1/2] kbuild: Allow asm-specific compiler_types.h
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v8 0/2] MIPS: Override barrier_before_unreachable() to fix microMIPS
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 08/23] mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooks
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH] octeon-irq.c: fix missing return value check of kzalloc()
  • From: Jiecheng Wu <jasonwood2031@xxxxxxxxx>
• [PATCH] msi-xlp.c: fix missing return value check of kzalloc()
  • From: Jiecheng Wu <jasonwood2031@xxxxxxxxx>
• [PATCH] MIPS: Avoid move psuedo-instruction whilst using MIPS_ISA_LEVEL
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 23/23] mtd: rawnand: Pass a nand_chip object nand_erase_nand()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 22/23] mtd: rawnand: Pass a nand_chip object to all nand_xxx_bbt() helpers
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 21/23] mtd: rawnand: Pass a nand_chip object to chip->setup_data_interface()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 17/23] mtd: rawnand: Pass a nand_chip object to chip->waitfunc()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 19/23] mtd: rawnand: Pass a nand_chip object to chip->{get,set}_features()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 16/23] mtd: rawnand: Pass a nand_chip object to chip->cmdfunc()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 20/23] mtd: rawnand: Pass a nand_chip object to chip->setup_read_retry()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 18/23] mtd: rawnand: Pass a nand_chip object to chip->erase()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 15/23] mtd: rawnand: Pass a nand_chip object to chip->dev_ready()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 14/23] mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 09/23] mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 12/23] mtd: rawnand: Pass a nand_chip object to chip->select_chip()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 13/23] mtd: rawnand: Pass a nand_chip object to chip->block_xxx() hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 08/23] mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 11/23] mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 07/23] mtd: rawnand: Pass a nand_chip object to ecc->correct()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 06/23] mtd: rawnand: Pass a nand_chip object to ecc->calculate()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 10/23] mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 05/23] mtd: rawnand: Pass a nand_chip object to ecc->hwctl()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 04/23] mtd: rawnand: Pass a nand_chip object to nand_wait_ready()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 02/23] mtd: rawnand: Pass a nand_chip object to nand_scan() & co
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 03/23] mtd: rawnand: Pass a nand_chip object to nand_release()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 01/23] mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooks
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 00/23] mtd: rawnand: Stop passing mtd_info to drivers
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] i2c: designware: document MSCC Ocelot bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] ip22-gio.c: fix missing return value check of kzalloc()
  • From: Jiecheng Wu <jasonwood2031@xxxxxxxxx>
• Re: [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH v4 0/7] Add support for MSCC Ocelot i2c
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v4 7/7] MIPS: dts: mscc: enable i2c on ocelot_pcb123
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 6/7] MIPS: dts: mscc: Add i2c on ocelot
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 5/7] i2c: designware: add MSCC Ocelot support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 3/7] i2c: designware: allow IP specific sda_hold_time
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 4/7] i2c: designware: document MSCC Ocelot bindings
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 0/7] Add support for MSCC Ocelot i2c
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 2/7] i2c: designware: move #ifdef CONFIG_OF to the top
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 1/7] i2c: designware: use generic table matching
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: serdev: How to attach serdev devices to USB based tty devices?
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: serdev: How to attach serdev devices to USB based tty devices?
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: serdev: How to attach serdev devices to USB based tty devices?
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Mathieu Malaterre <malat@xxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: serdev: How to attach serdev devices to USB based tty devices?
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• serdev: How to attach serdev devices to USB based tty devices?
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v8 1/6] Uprobes: Simplify uprobe_register() body
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alex Ghiti <alex@xxxxxxxx>
• Re: [PATCH v2 18/18] dt-bindings: serial: lantiq: Add optional properties for CCF
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] Main MIPS changes for 4.19
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 0/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 5/6] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v6 04/24] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] irqchip/bcm7038-l1: hide cpu offline callback when building for !SMP
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/6] Uprobes: Simplify uprobe_register() body
  • From: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/6] Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  • From: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/6] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/6] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/6] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/6] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [LKP] 315706049c [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/x86/mm/pageattr.c:1211 __cpa_process_fault
  • From: kernel test robot <rong.a.chen@xxxxxxxxx>
• [mips-linux:mips-next 128/129] include/linux/compiler_types.h:58:10: fatal error: asm/compiler.h: No such file or directory
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v8 5/6] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 4/6] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 2/6] Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 1/6] Uprobes: Simplify uprobe_register() body
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Song Liu <liu.song.a23@xxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [RFC] serial: sc16is7xx: Use DT sub-nodes for UART ports
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC] serial: sc16is7xx: Use DT sub-nodes for UART ports
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [RFC] serial: sc16is7xx: Use DT sub-nodes for UART ports
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v7 4/4] MIPS: Workaround GCC __builtin_unreachable reordering bug
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v6 09/24] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 08/18] serial: intel: Get serial id from dts
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 24/24] MIPS: jz4740: Drop obsolete code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 23/24] MIPS: CI20: defconfig: enable OST driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 22/24] MIPS: CI20: Reduce system timer and clocksource to 3 MHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 21/24] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 20/24] MIPS: qi_lb60: Move PWM devices to devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 19/24] MIPS: jz4740: Add DTS nodes for the TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 18/24] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 16/24] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 17/24] clk: jz4740: Add TCU clock
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 15/24] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 12/24] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 09/24] watchdog: jz4740: Use regmap provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 07/24] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 05/24] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 02/24] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 04/24] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 03/24] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 01/24] mfd: Add ingenic-tcu.h header
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 00/24] Ingenic TCU patchset v6
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/4] MIPS: Workaround GCC __builtin_unreachable reordering bug
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v6 4/4] MIPS: Workaround GCC __builtin_unreachable reordering bug
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v6 3/4] compiler.h: Allow arch-specific overrides
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v4 2/4] um: Add generated/ to MODE_INCLUDE
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v6 4/4] MIPS: Workaround GCC __builtin_unreachable reordering bug
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v6 3/4] compiler.h: Allow arch-specific overrides
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v6 1/4] alpha: Use OPTIMIZE_INLINING instead of asm/compiler.h
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v6 2/4] um: Add generated/ to MODE_INCLUDE
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v6 0/4] MIPS: Override barrier_before_unreachable() to fix microMIPS
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: ssb: Remove SSB_WARN_ON, SSB_BUG_ON and SSB_DEBUG
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH] mips: switch to NO_BOOTMEM
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] i2c: designware: use generic table matching
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] irqchip/bcm7038-l1: hide cpu offline callback when building for !SMP
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH v8 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v8 4/6] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v8 5/6] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v8 6/6] perf probe: Support SDT markers having reference counter (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v8 1/6] Uprobes: Simplify uprobe_register() body
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v8 2/6] Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v8 0/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v5 2/4] um: Add generated/ to MODE_INCLUDE
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v5 1/4] alpha: Use OPTIMIZE_INLINING instead of asm/compiler.h
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v5 4/4] MIPS: Workaround GCC __builtin_unreachable reordering bug
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v5 3/4] compiler.h: Allow arch-specific overrides
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v5 0/4] MIPS: Override barrier_before_unreachable() to fix microMIPS
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] mips: switch to NO_BOOTMEM
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v3 1/6] i2c: designware: use generic table matching
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()
  • From: Paul Burton <paul.burton@xxxxxxxx>
• MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v2 03/18] dt-bindings: clk: Add documentation of grx500 clock controller
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
  • From: yixin zhu <yixin.zhu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/18] serial: intel: Get serial id from dts
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alex Ghiti <alex@xxxxxxxx>
• Re: [PATCH v2 08/18] serial: intel: Get serial id from dts
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/18] dt-bindings: clk: Add documentation of grx500 clock controller
  • From: yixin zhu <yixin.zhu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
  • From: yixin zhu <yixin.zhu@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] i2c: designware: add MSCC Ocelot support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 01/18] doc: dt-bindings: jz4780-dma: Update bindings to reflect driver changes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/6] Add support for MSCC Ocelot i2c
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v4 15/18] dmaengine: dma-jz4780: Use dma_set_residue()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 18/18] MIPS: JZ4740: DTS: Add DMA nodes
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 17/18] MIPS: JZ4770: DTS: Add DMA nodes
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 16/18] MIPS: JZ4780: DTS: Update DMA node to match driver changes
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 14/18] dmaengine: dma-jz4780: Further residue status fix
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 13/18] dmaengine: dma-jz4780: Set DTCn register explicitly
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 12/18] dmaengine: dma-jz4780: Simplify jz4780_dma_desc_residue()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 11/18] dmaengine: dma-jz4780: Add missing residue DTC mask
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 10/18] dmaengine: dma-jz4780: Enable Fast DMA to the AIC
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 09/18] dmaengine: dma-jz4780: Add support for the JZ4725B SoC
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 08/18] dmaengine: dma-jz4780: Add support for the JZ4740 SoC
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 07/18] dmaengine: dma-jz4780: Add support for the JZ4770 SoC
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 06/18] dmaengine: dma-jz4780: Don't depend on MACH_JZ4780
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 05/18] dmaengine: dma-jz4780: Use 4-word descriptors
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 04/18] dmaengine: dma-jz4780: Separate chan/ctrl registers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 03/18] dmaengine: dma-jz4780: Avoid hardcoding number of channels
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 02/18] dmaengine: dma-jz4780: Return error if not probed from DT
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 01/18] doc: dt-bindings: jz4780-dma: Update bindings to reflect driver changes
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v4 00/18] JZ47xx DMA patchset v4
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v6 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 08/18] serial: intel: Get serial id from dts
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH 3/3] MIPS: vdso: Allow clang's --target flag in VDSO cflags
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 2/3] MIPS: Fix __write_64bit_c0_split() constraints for clang
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 1/3] MIPS: genvdso: Remove GOT checks
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 0/3] MIPS: clang/LLVM build fixes
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v3 6/6] MIPS: dts: mscc: enable i2c on ocelot_pcb123
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 5/6] MIPS: dts: mscc: Add i2c on ocelot
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 4/6] i2c: designware: add MSCC Ocelot support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 3/6] i2c: designware: allow IP specific sda_hold_time
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 2/6] i2c: designware: move #ifdef CONFIG_OF to the top
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 1/6] i2c: designware: use generic table matching
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 0/6] Add support for MSCC Ocelot i2c
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v6 11/11] hugetlb: Introduce generic version of huge_ptep_get
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 10/11] hugetlb: Introduce generic version of huge_ptep_set_access_flags
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 08/11] hugetlb: Introduce generic version of prepare_hugepage_range
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 07/11] hugetlb: Introduce generic version of huge_pte_wrprotect
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 06/11] hugetlb: Introduce generic version of huge_pte_none
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 05/11] hugetlb: Introduce generic version of huge_ptep_clear_flush
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 04/11] hugetlb: Introduce generic version of huge_ptep_get_and_clear
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 03/11] hugetlb: Introduce generic version of set_huge_pte_at
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 02/11] hugetlb: Introduce generic version of hugetlb_free_pgd_range
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 01/11] hugetlb: Harmonize hugetlb.h arch specific defines with pgtable.h
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v6 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [PATCH] MIPS: Remove obsolete MIPS checks for DST node "chosen@0"
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH] MIPS: Remove obsolete MIPS checks for DST node "chosen@0"
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: [RFC] serial: sc16is7xx: Use DT sub-nodes for UART ports
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 03/18] dt-bindings: clk: Add documentation of grx500 clock controller
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 05/18] dt-binding: MIPS: Add documentation of Intel MIPS SoCs
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 06/18] MIPS: dts: Change upper case to lower case
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: ocelot: add support for interrupt controller
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: ocelot: add support for interrupt controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [LKP] 28a54ccb4d [ 2.593639] BUG: unable to handle kernel paging request at c1aa2000
  • From: kernel test robot <rong.a.chen@xxxxxxxxx>
• Re: [PATCH v2 08/18] serial: intel: Get serial id from dts
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/18] MIPS: dts: Add initial support for Intel MIPS SoCs
  • From: Hua Ma <hua.ma@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/18] MIPS: intel: Add initial support for Intel MIPS SoCs
  • From: Hua Ma <hua.ma@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/18] serial: intel: Support more platform
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• [RFC] serial: sc16is7xx: Use DT sub-nodes for UART ports
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH v2 15/18] serial: intel: Support more platform
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [bug report] MIPS: ath79: add support for QCA953x QCA956x TP9343
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/18] MIPS: dts: Add initial support for Intel MIPS SoCs
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 4.4 001/124] MIPS: Fix off-by-one in pci_resource_to_user()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/18] dmaengine: dma-jz4780: Add support for the JZ4770 SoC
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/18] MIPS: intel: Add initial support for Intel MIPS SoCs
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v7 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [PATCH v5 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/18] serial: intel: Support more platform
  • From: "Wu, Songjun" <songjun.wu@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/18] serial: intel: Support more platform
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 08/18] serial: intel: Get serial id from dts
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Alex Ghiti <alex@xxxxxxxx>
• [PATCH v2 12/18] serial: intel: Rename fpiclk to freqclk
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 18/18] dt-bindings: serial: lantiq: Add optional properties for CCF
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 17/18] serial: intel: Change init_lqasc to static declaration
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 16/18] serial: intel: Reorder the head files
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 15/18] serial: intel: Support more platform
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 14/18] serial: intel: Add CCF support
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 13/18] serial: intel: Replace clk_enable/clk_disable with clk generic API
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 11/18] serial: intel: Use readl/writel instead of ltq_r32/ltq_w32
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 10/18] MIPS: lantiq: Unselect SWAP_IO_SPACE when LANTIQ is selected
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 09/18] serial: intel: Change ltq_w32_mask to asc_update_bits
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 08/18] serial: intel: Get serial id from dts
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 07/18] MIPS: dts: Add aliases node for lantiq danube serial
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 06/18] MIPS: dts: Change upper case to lower case
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 05/18] dt-binding: MIPS: Add documentation of Intel MIPS SoCs
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 03/18] dt-bindings: clk: Add documentation of grx500 clock controller
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 04/18] MIPS: dts: Add initial support for Intel MIPS SoCs
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 01/18] MIPS: intel: Add initial support for Intel MIPS SoCs
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• [PATCH v2 00/18] MIPS: intel: add initial support for Intel MIPS SoCs
  • From: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
• Re: disassembling raw MIPS binary
  • From: Paul Burton <paul.burton@xxxxxxxx>
• disassembling raw MIPS binary
  • From: "A.W.C." <bluestream@xxxxxxxxx>
• [PATCH] MIPS: generic: Remove input symbols from defconfig
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Alex Bounine <alex.bou9@xxxxxxxxx>
• Re: [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Alexei Colin <acolin@xxxxxxx>
• Re: [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Alexei Colin <acolin@xxxxxxx>
• Re: [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] mips: switch to NO_BOOTMEM
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: Delete unused code in linux32.c
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH] MIPS: Remove nabi_no_regargs
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 1/2] MIPS: Remove unused sys_32_mmap2
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Alex Bounine <alex.bou9@xxxxxxxxx>
• Re: [PATCH v5 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH 00/10] mscc: ocelot: add support for SerDes muxing configuration
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH net-next 10/10] net: mscc: ocelot: make use of SerDes PHYs for handling their configuration
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH 15/15] clk: pistachio: Fix wrong SDHost card speed
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware: use generic table matching
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• ssb: Remove SSB_WARN_ON, SSB_BUG_ON and SSB_DEBUG
  • From: Michael Büsch <m@xxxxxxx>
• Re: [PATCH v5 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Luiz Capitulino <lcapitulino@xxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware: use generic table matching
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RESEND PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Alex Bounine <alex.bou9@xxxxxxxxx>
• Re: [PATCH v4 0/3] Add support for MSCC Ocelot SPI
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add support for MSCC Ocelot SPI
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [RESEND PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 5/6] arm: enable RapidIO menu in Kconfig
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 1/6] rapidio: define top Kconfig menu in driver subtree
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Alex Bounine <alex.bou9@xxxxxxxxx>
• Re: [RESEND PATCH 1/6] rapidio: define top Kconfig menu in driver subtree
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware: use generic table matching
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Applied "spi: dw: document Microsemi integration" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v4 3/3] mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 2/3] mips: dts: mscc: Add spi on Ocelot
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 0/3] Add support for MSCC Ocelot SPI
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v4 1/3] spi: dw: document Microsemi integration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware: use generic table matching
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig
  • From: Alexei Colin <acolin@xxxxxxx>
• [RESEND PATCH 5/6] arm: enable RapidIO menu in Kconfig
  • From: Alexei Colin <acolin@xxxxxxx>
• [RESEND PATCH 4/6] mips: factor out RapidIO Kconfig entry
  • From: Alexei Colin <acolin@xxxxxxx>
• [RESEND PATCH 1/6] rapidio: define top Kconfig menu in driver subtree
  • From: Alexei Colin <acolin@xxxxxxx>
• [RESEND PATCH 3/6] powerpc: factor out RapidIO Kconfig menu entry
  • From: Alexei Colin <acolin@xxxxxxx>
• [RESEND PATCH 2/6] x86: factor out RapidIO Kconfig menu
  • From: Alexei Colin <acolin@xxxxxxx>
• [RESEND PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Alexei Colin <acolin@xxxxxxx>
• Re: [PATCH v2 0/6] Add support for MSCC Ocelot i2c
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Alex Bounine <alex.bou9@xxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware: use generic table matching
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] Add support for MSCC Ocelot i2c
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: designware: add MSCC Ocelot support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] i2c: designware: move #ifdef CONFIG_OF to the top
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware: use generic table matching
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 5/6] mips: dts: mscc: Add i2c on ocelot
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 6/6] mips: dts: mscc: enable i2c on ocelot_pcb123
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 1/6] i2c: designware: use generic table matching
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 4/6] i2c: designware: add MSCC Ocelot support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 2/6] i2c: designware: move #ifdef CONFIG_OF to the top
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 3/6] i2c: designware: allow IP specific sda_hold_time
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 0/6] Add support for MSCC Ocelot i2c
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v5 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [PATCH v5 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH 4/6] mips: factor out RapidIO Kconfig entry
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH net-next 05/10] net: mscc: ocelot: simplify register access for PLL5 configuration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH net-next 04/10] net: mscc: ocelot: move the HSIO header to include/soc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH net-next 03/10] net: mscc: ocelot: get HSIO regmap from syscon
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH net-next 01/10] MIPS: mscc: ocelot: make HSIO registers address range a syscon
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v5 11/11] hugetlb: Introduce generic version of huge_ptep_get
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 10/11] hugetlb: Introduce generic version of huge_ptep_set_access_flags
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 08/11] hugetlb: Introduce generic version of prepare_hugepage_range
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 07/11] hugetlb: Introduce generic version of huge_pte_wrprotect
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 06/11] hugetlb: Introduce generic version of huge_pte_none
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 05/11] hugetlb: Introduce generic version of huge_ptep_clear_flush
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 04/11] hugetlb: Introduce generic version of huge_ptep_get_and_clear
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 03/11] hugetlb: Introduce generic version of set_huge_pte_at
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 02/11] hugetlb: Introduce generic version of hugetlb_free_pgd_range
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 01/11] hugetlb: Harmonize hugetlb.h arch specific defines with pgtable.h
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v5 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• [PATCH v7 6/6] perf probe: Support SDT markers having reference counter (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v7 5/6] trace_uprobe/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v7 4/6] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v7 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v7 2/6] Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v7 1/6] Uprobes: Simplify uprobe_register() body
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• [PATCH v7 0/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH] mips:sgi-ip22:Check return value from kzalloc
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 4/6] mips: factor out RapidIO Kconfig entry
  • From: Alexei Colin <acolin@xxxxxxx>
• Re: [PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• [PATCH 0/6] rapidio: move Kconfig menu definition to subsystem
  • From: Alexei Colin <acolin@xxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 08/21] watchdog: jz4740: Use regmap and WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/18] doc: dt-bindings: jz4780-dma: Update bindings to reflect driver changes
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] MIPS: kexec: Use prepare method from generic platform as default option
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] MIPS: Make play_dead() work for kexec
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 13/15] spi: img-spfi: RX maximum burst size for DMA is 8
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 14/15] spi: img-spfi: Finish every transfer cleanly
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 10/15] spi: img-spfi: Implement dual and quad mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next 10/10] net: mscc: ocelot: make use of SerDes PHYs for handling their configuration
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 00/10] mscc: ocelot: add support for SerDes muxing configuration
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 00/10] mscc: ocelot: add support for SerDes muxing configuration
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH net-next 04/10] net: mscc: ocelot: move the HSIO header to include/soc
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH 00/10] mscc: ocelot: add support for SerDes muxing configuration
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH 06/10] phy: add QSGMII and PCIE modes
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH net-next 10/10] net: mscc: ocelot: make use of SerDes PHYs for handling their configuration
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH 09/10] phy: add driver for Microsemi Ocelot SerDes muxing
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH net-next 03/10] net: mscc: ocelot: get HSIO regmap from syscon
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH net-next 05/10] net: mscc: ocelot: simplify register access for PLL5 configuration
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH 08/10] MIPS: mscc: ocelot: add SerDes mux DT node
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH net-next 01/10] MIPS: mscc: ocelot: make HSIO registers address range a syscon
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Applied "spi: dw: export dw_spi_set_cs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-mmio: add MSCC Ocelot support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: spi: snps,dw-apb-ssi: document Microsemi integration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 4/4] net: dsa: Add Lantiq / Intel DSA driver for vrx200
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 4/4] net: dsa: Add Lantiq / Intel DSA driver for vrx200
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 2/4] net: dsa: Add Lantiq / Intel GSWIP tag support
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [GIT PULL] Another MIPS fix for 4.18
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] MIPS: remove mips_swiotlb_ops
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Patch "MIPS: Fix off-by-one in pci_resource_to_user()" has been added to the 4.4-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] MIPS: generic: Select MIPS_AUTO_PFN_OFFSET
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 3/4] MIPS: Allow auto-dection of ARCH_PFN_OFFSET & PHYS_OFFSET
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 1/4] MIPS: Make (UN)CAC_ADDR() PHYS_OFFSET-agnostic
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 2/4] MIPS: Fix ISA virt/bus conversion for non-zero PHYS_OFFSET
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH 0/4] MIPS: Support auto-detecting ARCH_PFN_OFFSET / PHYS_OFFSET
  • From: Paul Burton <paul.burton@xxxxxxxx>
• MIPS: Fix ISA virt/bus conversion for non-zero PHYS_OFFSET
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] mips: switch to NO_BOOTMEM
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] spi: dw-mmio: add MSCC Ocelot support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/5] spi: dw: export dw_spi_set_cs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 5/5] mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 3/5] spi: dw-mmio: add MSCC Ocelot support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 1/5] spi: dw: export dw_spi_set_cs
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 4/5] mips: dts: mscc: Add spi on Ocelot
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 0/5] Add support for MSCC Ocelot SPI
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v3 2/5] dt-bindings: spi: snps,dw-apb-ssi: document Microsemi integration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH] MIPS: remove mips_swiotlb_ops
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v2 2/4] spi: dw-mmio: add MSCC Ocelot support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v6 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v6 5/6] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v2 2/4] spi: dw-mmio: add MSCC Ocelot support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 4/4] mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 3/4] mips: dts: mscc: Add spi on Ocelot
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 2/4] spi: dw-mmio: add MSCC Ocelot support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: spi: snps,dw-apb-ssi: document Microsemi integration
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 0/4] Add support for MSCC Ocelot SPI
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH] Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 4.4 01/23] MIPS: ath79: fix register address in ath79_ddr_wb_flush()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.9 02/33] MIPS: Fix off-by-one in pci_resource_to_user()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.9 01/33] MIPS: ath79: fix register address in ath79_ddr_wb_flush()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.14 03/48] MIPS: Fix off-by-one in pci_resource_to_user()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.14 02/48] MIPS: ath79: fix register address in ath79_ddr_wb_flush()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.17 04/66] MIPS: Fix off-by-one in pci_resource_to_user()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.17 03/66] MIPS: ath79: fix register address in ath79_ddr_wb_flush()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [PATCH v6 5/6] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Helge Deller <deller@xxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alex Ghiti <alex@xxxxxxxx>
• Re: [PATCH] MIPS: TXx9: remove useless RTC definitions
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 11/11] hugetlb: Introduce generic version of huge_ptep_get
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 10/11] hugetlb: Introduce generic version of huge_ptep_set_access_flags
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 09/11] hugetlb: Introduce generic version of huge_ptep_set_wrprotect
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 06/11] hugetlb: Introduce generic version of huge_pte_none
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 08/11] hugetlb: Introduce generic version of prepare_hugepage_range
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 07/11] hugetlb: Introduce generic version of huge_pte_wrprotect
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 05/11] hugetlb: Introduce generic version of huge_ptep_clear_flush
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 04/11] hugetlb: Introduce generic version of huge_ptep_get_and_clear
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 03/11] hugetlb: Introduce generic version of set_huge_pte_at
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 02/11] hugetlb: Introduce generic version of hugetlb_free_pgd_range
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH v4 01/11] hugetlb: Harmonize hugetlb.h arch specific defines with pgtable.h
  • From: Mike Kravetz <mike.kravetz@xxxxxxxxxx>
• Re: [PATCH] mips: configs: remove no longer needed config option
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] MIPS: mscc: ocelot: add MIIM1 bus
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] MIPS: mscc: ocelot: fix length of memory address space for MIIM
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] MIPS: TXx9: remove useless RTC definitions
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] mips: switch to NO_BOOTMEM
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alex Ghiti <alex@xxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alex Ghiti <alex@xxxxxxxx>
• [PATCH] MIPS: TXx9: remove useless RTC definitions
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: LEROY Christophe <christophe.leroy@xxxxxx>
• Patch "MIPS: Fix off-by-one in pci_resource_to_user()" has been added to the 4.9-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Patch "MIPS: ath79: fix register address in ath79_ddr_wb_flush()" has been added to the 4.9-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Patch "MIPS: ath79: fix register address in ath79_ddr_wb_flush()" has been added to the 4.4-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Patch "MIPS: Fix off-by-one in pci_resource_to_user()" has been added to the 4.17-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Patch "MIPS: ath79: fix register address in ath79_ddr_wb_flush()" has been added to the 4.17-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Patch "MIPS: Fix off-by-one in pci_resource_to_user()" has been added to the 4.14-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Patch "MIPS: ath79: fix register address in ath79_ddr_wb_flush()" has been added to the 4.14-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Helge Deller <deller@xxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH] mips: configs: remove no longer needed config option
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• Re: [PATCH] mips: switch to NO_BOOTMEM
  • From: Mike Rapoport <rppt@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alex Ghiti <alex@xxxxxxxx>
• Re: [PATCH 15/15] clk: pistachio: Fix wrong SDHost card speed
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 14/21] clk: jz4740: Add TCU clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] arm64, kaslr: export offset in VMCOREINFO ELF notes
  • From: Bhupesh Sharma <bhsharma@xxxxxxxxxx>
• Re: [PATCH V2 11/25] dt-bindings: PCI: qcom,ar7240: adds binding doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] net: dsa: Add Lantiq / Intel DSA driver for vrx200
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 4/4] net: dsa: Add Lantiq / Intel DSA driver for vrx200
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 4/4] net: dsa: Add Lantiq / Intel DSA driver for vrx200
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 14/21] clk: jz4740: Add TCU clock
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] net: dsa: Add Lantiq / Intel GSWIP tag support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] MIPS: mscc: ocelot: add MIIM1 bus
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] MIPS: mscc: ocelot: fix length of memory address space for MIIM
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH] MIPS: mscc: ocelot: add MIIM1 bus
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH 2/2] pinctrl: ocelot: add support for interrupt controller
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH 1/2] MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• [PATCH] MIPS: mscc: ocelot: fix length of memory address space for MIIM
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• MIPS: mscc: ocelot: fix length of memory address space for MIIM
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
• Re: [PATCH v6 5/6] Uprobes/sdt: Prevent multiple reference counter for same uprobe
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alexandre Ghiti <alex@xxxxxxxx>
• Re: [PATCH V2 00/25] MIPS: ath79: convert target to pure OF
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V3 03/10] MIPS: Loongson-3: Enable Store Fill Buffer atruntime
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH V2 00/25] MIPS: ath79: convert target to pure OF
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH V3 03/10] MIPS: Loongson-3: Enable Store Fill Buffer atruntime
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• Re: [PATCH v5 08/21] watchdog: jz4740: Use regmap and WDT clock provided by TCU driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [GIT PULL] MIPS fixes for 4.18-rc7
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v3 6/6] MIPS: kexec: Use prepare method from generic platform as default option
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v3 01/18] doc: dt-bindings: jz4780-dma: Update bindings to reflect driver changes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/6] MIPS: Make play_dead() work for kexec
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH v5 21/21] MIPS: jz4740: Drop obsolete code
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 20/21] MIPS: CI20: defconfig: enable OST driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 19/21] MIPS: CI20: Reduce system timer clock to 3 MHz
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 18/21] MIPS: qi_lb60: Use 750 kHz system timer & enable clocksource
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 17/21] MIPS: qi_lb60: Move PWM devices to devicetree
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 16/21] MIPS: jz4740: Add DTS nodes for the TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 15/21] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 14/21] clk: jz4740: Add TCU clock
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 13/21] pwm: jz4740: Add support for the JZ4725B
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 12/21] pwm: jz4740: Remove unused devicetree compatible strings
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 11/21] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 10/21] pwm: jz4740: Use regmap and clocks from TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 09/21] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 08/21] watchdog: jz4740: Use regmap and WDT clock provided by TCU driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 07/21] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 06/21] clocksource: Add driver for the Ingenic JZ47xx OST
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 05/21] clocksource: Add a new timer-ingenic driver
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 03/21] doc: Add doc for the Ingenic TCU hardware
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 01/21] mfd: Add ingenic-tcu.h header
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 02/21] dt-bindings: ingenic: Add DT bindings for TCU clocks
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 00/21] Ingenic JZ47xx TCU patchset v5
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] checks: Detect cascoda,ca8210 extclock-gpio false-positive
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/15] MIPS: dts: img: pistachio_marduk: Switch mmc to 1 bit mode
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH] checks: Detect cascoda,ca8210 extclock-gpio false-positive
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH 1/3] MIPS: jz4780: Allow access to jz4740-i2s
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 1/2] MIPS: Ci20: Enable SPI/GPIO driver
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] checks: Detect cascoda,ca8210 extclock-gpio false-positive
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] checks: Detect cascoda,ca8210 extclock-gpio false-positive
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] checks: Detect cascoda,ca8210 extclock-gpio false-positive
  • From: Paul Burton <paul.burton@xxxxxxxx>
• [PATCH] checks: Detect cascoda,ca8210 extclock-gpio false-positive
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 2/2] MIPS: Octeon: Select HAS_RAPIDIO
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] mips: use asm-generic version of msi.h
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v3 07/18] dmaengine: dma-jz4780: Add support for the JZ4770 SoC
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 07/18] dmaengine: dma-jz4780: Add support for the JZ4770 SoC
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Masami Hiramatsu <mhiramat@xxxxxxxxxx>
• Re: [PATCH v3 11/18] dmaengine: dma-jz4780: Add missing residue DTC mask
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 07/18] dmaengine: dma-jz4780: Add support for the JZ4770 SoC
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 03/18] dmaengine: dma-jz4780: Avoid hardcoding number of channels
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Octeon: Select HAS_RAPIDIO
  • From: Alex Bounine <alex.bou9@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Introduce HAS_RAPIDIO Kconfig option
  • From: Alex Bounine <alex.bou9@xxxxxxxxx>
• Re: [PATCH v3 00/18] JZ4780 DMA patchset v3
  • From: Vinod <vkoul@xxxxxxxxxx>
• [PATCH 2/2] MIPS: Octeon: Select HAS_RAPIDIO
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH 1/2] MIPS: Introduce HAS_RAPIDIO Kconfig option
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH] mips: use asm-generic version of msi.h
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [PATCH 09/15] dmaengine: img-mdc: Handle early status read
  • From: Vinod Koul <vinod.koul@xxxxxxxxxx>
• Re: [PATCH v3 00/18] JZ4780 DMA patchset v3
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] MIPS: lantiq: Do not enable IRQs in dma open
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] MIPS: lantiq: Do not enable IRQs in dma open
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH v6 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx>
• Re: [PATCH V3 02/10] MIPS: Loongson64: Define and use some CP0 registers
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH V3 01/10] MIPS: Loongson: Add Loongson-3A R3.1 basic support
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH V3 03/10] MIPS: Loongson-3: Enable Store Fill Buffer atruntime
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] MIPS: jz4740: Bump zload address
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 3/4] net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 1/4] MIPS: lantiq: Do not enable IRQs in dma open
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] MIPS: lantiq: Use dma_zalloc_coherent() in dma code
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH 06/15] MIPS: dts: img: pistachio_marduk: Add 6Lowpan node
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v3 00/18] JZ4780 DMA patchset v3
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Alex Ghiti <alex@xxxxxxxx>
• Re: [PATCH] MIPS: Change definition of cpu_relax() for Loongson-3
  • From: Paul Burton <paul.burton@xxxxxxxx>
• Re: [PATCH] arm64, kaslr: export offset in VMCOREINFO ELF notes
  • From: James Morse <james.morse@xxxxxxx>
• Re: [PATCH v6 3/6] Uprobes: Support SDT markers having reference count (semaphore)
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• [PATCH v3 1/6] MIPS: Make play_dead() work for kexec
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• [PATCH v3 6/6] MIPS: kexec: Use prepare method from generic platform as default option
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• [PATCH v3 5/6] MIPS: kexec: Relax memory restriction
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• [PATCH v3 4/6] MIPS: kexec: Do not flush system wide caches in machine_kexec()
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• [PATCH v3 3/6] MIPS: kexec: Deprecate (relocated_)kexec_smp_wait
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• [PATCH v3 2/6] MIPS: kexec: Let the new kernel handle all CPUs
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• [PATCH v3 0/6] MIPS: kexec/kdump: Fix smp reboot and other issues
  • From: Dengcheng Zhu <dzhu@xxxxxxxxxxxx>
• Re: [PATCH v4 00/11] hugetlb: Factorize hugetlb architecture primitives
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: wm9712: fix replace codec to component
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 13/15] spi: img-spfi: RX maximum burst size for DMA is 8
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 14/15] spi: img-spfi: Finish every transfer cleanly
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 10/15] spi: img-spfi: Implement dual and quad mode
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 15/15] clk: pistachio: Fix wrong SDHost card speed
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 09/15] dmaengine: img-mdc: Handle early status read
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 07/15] MIPS: dts: img: pistachio_marduk: Add SPI UART node
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 06/15] MIPS: dts: img: pistachio_marduk: Add 6Lowpan node
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 08/15] MIPS: dts: img: pistachio_marduk: Add user LEDs
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 12/15] spi: img-spfi: Use device 0 configuration for all devices
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 11/15] spi: img-spfi: Set device select bits for SPFI port state
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 05/15] MIPS: dts: img: pistachio_marduk: Enable SPIM0
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 04/15] MIPS: dts: img: pistachio_marduk: Switch mmc to 1 bit mode
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 03/15] MIPS: dts: img: pistachio: Rename spim0-clk pin node label
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH 02/15] MIPS: dts: img: pistachio_marduk: Cleanups
  • From: Andreas Färber <afaerber@xxxxxxx>