[RESEND PATCH 6/6] arm64: enable RapidIO menu in Kconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Platforms with a PCI bus will be offered the RapidIO menu since they may
be want support for a RapidIO PCI device. Platforms without a PCI bus
that might include a RapidIO IP block will need to "select HAS_RAPIDIO"
in the platform-/machine-specific "config ARCH_*" Kconfig entry.

Tested that kernel builds for arm64 with RapidIO subsystem and
switch drivers enabled, also that the modules load successfully
on a custom Aarch64 Qemu model.

Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxx>
Cc: John Paul Walters <jwalters@xxxxxxx>
Cc: x86@xxxxxxxxxx
Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
Cc: linux-mips@xxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx,
Signed-off-by: Alexei Colin <acolin@xxxxxxx>
---
 arch/arm64/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a8f0c74e6f7f..5e8cf90505ec 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -308,6 +308,8 @@ config PCI_SYSCALL
 
 source "drivers/pci/Kconfig"
 
+source "drivers/rapidio/Kconfig"
+
 endmenu
 
 menu "Kernel Features"
-- 
2.18.0





[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux