Enable the i2c controller on ocelot PCB123. While there are no i2c devices
on the board itself, it can be used to control the SFP transceivers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index 4ccd65379059..336c859a9bbe 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -26,6 +26,12 @@
status = "okay";
};
+&i2c {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ status = "okay";
+};
+
&mdio0 {
status = "okay";
};
--
2.18.0
