Linux Renesas SOC

• Thread Index

• [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.18
  • From: Simon Horman
• [PATCH 028/102] arm64: dts: renesas: Add Renesas R8A77990 SoC support
  • From: Simon Horman
• [PATCH 032/102] arm64: dts: renesas: r8a77970: Enable IPMMU devices
  • From: Simon Horman
• [PATCH 035/102] arm64: dts: renesas: salvator-common: Rename EtherAVB "mdc" pin group to "mdio"
  • From: Simon Horman
• [PATCH 030/102] arm64: dts: renesas: r8a7795: Enable IPMMU devices
  • From: Simon Horman
• [PATCH 102/102] arm64: dts: renesas: salvator-common: Add ADV7482 support
  • From: Simon Horman
• [PATCH 101/102] arm64: dts: renesas: salvator-common: enable VIN
  • From: Simon Horman
• [PATCH 100/102] arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
  • From: Simon Horman
• [PATCH 098/102] arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
  • From: Simon Horman
• [PATCH 099/102] arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
  • From: Simon Horman
• [PATCH 096/102] arm64: dts: renesas: r8a7795: add VIN and CSI-2 nodes
  • From: Simon Horman
• [PATCH 097/102] arm64: dts: renesas: r8a7795-es1: add CSI-2 node
  • From: Simon Horman
• [PATCH 095/102] arm64: dts: renesas: r8a77965: add I2C support
  • From: Simon Horman
• [PATCH 094/102] arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
  • From: Simon Horman
• [PATCH 093/102] arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
  • From: Simon Horman
• [PATCH 092/102] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Simon Horman
• [PATCH 090/102] arm64: dts: renesas: initial V3HSK board device tree
  • From: Simon Horman
• [PATCH 091/102] arm64: dts: renesas: r8a77990: Add PFC device node
  • From: Simon Horman
• [PATCH 089/102] arm64: dts: renesas: r8a77980: disable EtherAVB
  • From: Simon Horman
• [PATCH 088/102] arm64: dts: renesas: r8a77970: disable EtherAVB
  • From: Simon Horman
• [PATCH 086/102] arm64: dts: renesas: r8a77980: add resets property to CAN-FD node
  • From: Simon Horman
• [PATCH 087/102] arm64: dts: renesas: r8a77995: Add VIN4
  • From: Simon Horman
• [PATCH 085/102] arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU node
  • From: Simon Horman
• [PATCH 083/102] arm64: dts: renesas: r8a77965: Add SDHI device nodes
  • From: Simon Horman
• [PATCH 084/102] arm64: dts: renesas: r8a77970: Add secondary CA53 CPU core
  • From: Simon Horman
• [PATCH 082/102] arm64: dts: renesas: ulcb: Add PMIC DDR Backup Power config
  • From: Simon Horman
• [PATCH 081/102] arm64: dts: renesas: salvator-common: Add PMIC DDR Backup Power config
  • From: Simon Horman
• [PATCH 080/102] arm64: dts: renesas: ulcb: Add BD9571 PMIC
  • From: Simon Horman
• [PATCH 079/102] arm64: dts: renesas: r8a77965: Correct whitespace
  • From: Simon Horman
• [PATCH 078/102] arm64: dts: renesas: r8a7796: Correct whitespace
  • From: Simon Horman
• [PATCH 077/102] arm64: dts: renesas: r8a7795: Correct whitespace
  • From: Simon Horman
• [PATCH 076/102] arm64: dts: renesas: r8a7795: salvator-xs: enable USB2.0 host channel 3
  • From: Simon Horman
• [PATCH 075/102] arm64: dts: renesas: r8a7795: salvator-xs: enable hsusb channel 3 node
  • From: Simon Horman
• [PATCH 074/102] arm64: dts: renesas: r8a7795: salvator-xs: enable usb2_phy3 node
  • From: Simon Horman
• [PATCH 073/102] arm64: dts: renesas: salvator-common: add eeprom
  • From: Simon Horman
• [PATCH 070/102] arm64: dts: renesas: eagle: add CAN-FD support
  • From: Simon Horman
• [PATCH 072/102] arm64: dts: renesas: condor: add CAN-FD support
  • From: Simon Horman
• [PATCH 071/102] arm64: dts: renesas: r8a77980: add CAN-FD support
  • From: Simon Horman
• [PATCH 068/102] arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal support
  • From: Simon Horman
• [PATCH 069/102] arm64: dts: renesas: r8a77970: add CAN-FD support
  • From: Simon Horman
• [PATCH 067/102] arm64: dts: renesas: r8a77965: use r8a77965-sysc binding definitions
  • From: Simon Horman
• [PATCH 066/102] arm64: dts: renesas: r8a77980: use SYSC power domain macros
  • From: Simon Horman
• [PATCH 065/102] arm64: dts: renesas: r8a77980: use CPG core clock macros
  • From: Simon Horman
• [PATCH 064/102] arm64: dts: renesas: r8a77965: Add address properties to rcar_sound port nodes
  • From: Simon Horman
• [PATCH 063/102] arm64: dts: renesas: r8a7796: Add address properties to rcar_sound port nodes
  • From: Simon Horman
• [PATCH 061/102] arm64: dts: renesas: v3msk: add DU/LVDS/HDMI support
  • From: Simon Horman
• [PATCH 062/102] arm64: dts: renesas: r8a7795: Add address properties to rcar_sound port nodes
  • From: Simon Horman
• [PATCH 060/102] arm64: dts: renesas: condor: add eMMC support
  • From: Simon Horman
• [PATCH 059/102] arm64: dts: renesas: r8a77965-salvator-xs: Enable DU external clocks and HDMI
  • From: Simon Horman
• [PATCH 058/102] arm64: dts: renesas: r8a77965-salvator-x: Enable DU external clocks and HDMI
  • From: Simon Horman
• [PATCH 026/102] arm64: dts: renesas: r8a77965: sort subnodes of the soc node
  • From: Simon Horman
• [PATCH 057/102] arm64: dts: renesas: r8a77965: Add HDMI encoder instance
  • From: Simon Horman
• [PATCH 056/102] arm64: dts: renesas: r8a77965: Populate the DU instance placeholder
  • From: Simon Horman
• [PATCH 055/102] arm64: dts: renesas: r8a77965: Add VSP instances
  • From: Simon Horman
• [PATCH 054/102] arm64: dts: renesas: r8a77965: Add FCPF and FCPV instances
  • From: Simon Horman
• [PATCH 053/102] arm64: dts: renesas: r8a77990: Revise the cache controller node
  • From: Simon Horman
• [PATCH 052/102] arm64: dts: renesas: r8a77990: Revise the psci node
  • From: Simon Horman
• [PATCH 050/102] arm64: dts: renesas: r8a7796-salvator-x: enable HDMI sound
  • From: Simon Horman
• [PATCH 051/102] arm64: dts: renesas: r8a7795-es1: Enable IPMMU devices
  • From: Simon Horman
• [PATCH 049/102] arm64: dts: renesas: r8a7795-salvator-x: enable HDMI sound
  • From: Simon Horman
• [PATCH 048/102] arm64: dts: renesas: r8a7796-salvator-xs: enable HDMI sound
  • From: Simon Horman
• [PATCH 047/102] arm64: dts: renesas: r8a7795-salvator-xs: enable HDMI sound
  • From: Simon Horman
• [PATCH 046/102] arm64: dts: renesas: r8a7795-es1-salvator-x: enable HDMI sound
  • From: Simon Horman
• [PATCH 045/102] arm64: dts: renesas: salvator-common: use audio-graph-card for Sound
  • From: Simon Horman
• [PATCH 044/102] arm64: dts: renesas: r8a7796: add HDMI sound support
  • From: Simon Horman
• [PATCH 043/102] arm64: dts: renesas: r8a7795: add HDMI sound support
  • From: Simon Horman
• [PATCH 024/102] arm64: dts: renesas: r8a77995: sort subnodes of the soc node
  • From: Simon Horman
• [PATCH 042/102] arm64: dts: renesas: r8a77980: add MMC support
  • From: Simon Horman
• [PATCH 041/102] arm64: dts: renesas: condor: add EtherAVB pins
  • From: Simon Horman
• [PATCH 040/102] arm64: dts: renesas: condor: add SCIF0 pins
  • From: Simon Horman
• [PATCH 022/102] arm64: dts: renesas: eagle: Enable HDMI output
  • From: Simon Horman
• [PATCH 038/102] arm64: dts: renesas: v3msk: add EtherAVB pins
  • From: Simon Horman
• [PATCH 039/102] arm64: dts: renesas: r8a77980: add PFC support
  • From: Simon Horman
• [PATCH 037/102] arm64: dts: renesas: eagle: add EtherAVB pins
  • From: Simon Horman
• [PATCH 020/102] arm64: dts: renesas: r8a77970: add DU support
  • From: Simon Horman
• [PATCH 036/102] arm64: dts: renesas: ulcb: Rename EtherAVB "mdc" pin group to "mdio"
  • From: Simon Horman
• [PATCH 033/102] arm64: dts: renesas: r8a77995: Enable IPMMU devices
  • From: Simon Horman
• [PATCH 034/102] arm64: dts: renesas: draak: Rename EtherAVB "mdc" pin group to "mdio"
  • From: Simon Horman
• [PATCH 031/102] arm64: dts: renesas: r8a7796: Enable IPMMU devices
  • From: Simon Horman
• [PATCH 029/102] arm64: dts: renesas: Add Renesas Ebisu board support
  • From: Simon Horman
• [PATCH 027/102] arm64: dts: renesas: r8a77970: sort subnodes of the soc node
  • From: Simon Horman
• [PATCH 025/102] arm64: dts: renesas: r8a77965: sort subnodes of the root node
  • From: Simon Horman
• [PATCH 010/102] arm64: dts: renesas: r8a7796: sort subnodes of the soc node
  • From: Simon Horman
• [PATCH 017/102] arm64: dts: renesas: r8a7795: decrease temperature hysteresis
  • From: Simon Horman
• [PATCH 018/102] arm64: dts: renesas: r8a7796: decrease temperature hysteresis
  • From: Simon Horman
• [PATCH 013/102] arm64: dts: renesas: r8a77965: Add all MSIOF device nodes
  • From: Simon Horman
• [PATCH 014/102] arm64: dts: renesas: r8a77965: Add PWM device nodes
  • From: Simon Horman
• [PATCH 009/102] arm64: dts: renesas: r8a7796: sort subnodes of the root node
  • From: Simon Horman
• [PATCH 008/102] arm64: dts: renesas: r8a77970: Update IPMMU DS1 bit number
  • From: Simon Horman
• [PATCH 007/102] arm64: dts: renesas: r8a77965: add USB 3.0 peripheral node
  • From: Simon Horman
• [PATCH 023/102] arm64: dts: renesas: r8a77995: sort subnodes of the root node
  • From: Simon Horman
• [PATCH 021/102] arm64: dts: renesas: r8a77970: add LVDS support
  • From: Simon Horman
• [PATCH 012/102] arm64: dts: renesas: r8a7795: sort subnodes of the soc node
  • From: Simon Horman
• [PATCH 019/102] arm64: dts: renesas: r8a77970: add VSPD support
  • From: Simon Horman
• [PATCH 016/102] arm64: dts: renesas: Add Renesas R8A77990 Kconfig support
  • From: Simon Horman
• [PATCH 015/102] arm64: dts: renesas: r8a77970: add FCPVD support
  • From: Simon Horman
• [PATCH 011/102] arm64: dts: renesas: r8a7795: sort subnodes of the root node
  • From: Simon Horman
• [PATCH 005/102] arm64: dts: renesas: r8a77965: add HS-USB node
  • From: Simon Horman
• [PATCH 006/102] arm64: dts: renesas: r8a77965: add USB 3.0 host node
  • From: Simon Horman
• [PATCH 003/102] arm64: dts: renesas: r8a77965: add USB 2.0 host nodes
  • From: Simon Horman
• [PATCH 004/102] arm64: dts: renesas: r8a77965: add usb_dmac nodes
  • From: Simon Horman
• [PATCH 001/102] arm64: dts: renesas: r8a77965: add usb2_phy nodes
  • From: Simon Horman
• [PATCH 002/102] arm64: dts: renesas: r8a77965: add usb3_phy node
  • From: Simon Horman
• [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.18
  • From: Simon Horman
• [PATCH 3/3] arm64: defconfig: enable R8A77990 SoC
  • From: Simon Horman
• [PATCH 1/3] arm64: defconfig: makes SND_SIMPLE_CARD to module
  • From: Simon Horman
• [PATCH 2/3] arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD
  • From: Simon Horman
• [GIT PULL] Renesas ARM64 Based SoC Defconfig Updates for v4.18
  • From: Simon Horman
• [PATCH 1/2] media: arch: sh: ecovec: Remove calls to empty arch_setup_pdev_archdata()
  • From: Geert Uytterhoeven
• [PATCH 0/2] Remove calls to empty arch_setup_pdev_archdata()
  • From: Geert Uytterhoeven
• [PATCH 2/2] media: arch: sh: migor: Remove calls to empty arch_setup_pdev_archdata()
  • From: Geert Uytterhoeven
• Re: [PATCH v10 8/8] media: vsp1: Move video configuration to a cached dlb
  • From: Kieran Bingham
• Re: [PATCH 0/3] Add R8A77980 GEther support
  • From: Sergei Shtylyov
• Re: [PATCH v2] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
  • From: Sergei Shtylyov
• [PATCH v2] vfio: platform: Fix using devices in PM Domains
  • From: Geert Uytterhoeven
• [PATCH v2] sh_eth: Change platform check to CONFIG_ARCH_RENESAS
  • From: Geert Uytterhoeven
• [PATCH v2] [media] v4l: rcar_fdp1: Change platform dependency to ARCH_RENESAS
  • From: Geert Uytterhoeven
• Re: [PATCH] clk: renesas: r8a7795: Add CR clock
  • From: Simon Horman
• [PATCH v2] watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklist
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Simon Horman
• [PATCH/RFC] usb: gadget: function: printer: avoid wrong list handling in printer_write()
  • From: Yoshihiro Shimoda
• Re: rcar-du DRM driver failed to build
  • From: Laurent Pinchart
• Re: [PATCH 2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
  • From: Vinod Koul
• Re: [PATCH 1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
  • From: Vinod Koul
• rcar-du DRM driver failed to build
  • From: Shawn Lin
• Re: [PATCH] arm64: dts: renesas: r8a77980: add SMP support
  • From: Geert Uytterhoeven
• [PATCH] arm64: dts: renesas: r8a77980: add SMP support
  • From: Sergei Shtylyov
• Re: [PATCH v7 8/8] media: vsp1: Move video configuration to a cached dlb
  • From: Laurent Pinchart
• Re: [PATCH v10 8/8] media: vsp1: Move video configuration to a cached dlb
  • From: Laurent Pinchart
• Re: [PATCH 0/3] Add R8A77980 GEther support
  • From: David Miller
• [PATCH v10 2/8] media: vsp1: Protect bodies against overflow
  • From: Kieran Bingham
• [PATCH v10 0/8] vsp1: TLB optimisation and DL caching
  • From: Kieran Bingham
• [PATCH v10 3/8] media: vsp1: Provide a body pool
  • From: Kieran Bingham
• [PATCH v10 5/8] media: vsp1: Use reference counting for bodies
  • From: Kieran Bingham
• [PATCH v10 8/8] media: vsp1: Move video configuration to a cached dlb
  • From: Kieran Bingham
• [PATCH v10 7/8] media: vsp1: Adapt entities to configure into a body
  • From: Kieran Bingham
• [PATCH v10 6/8] media: vsp1: Refactor display list configure operations
  • From: Kieran Bingham
• [PATCH v10 4/8] media: vsp1: Convert display lists to use new body pool
  • From: Kieran Bingham
• [PATCH v10 1/8] media: vsp1: Reword uses of 'fragment' as 'body'
  • From: Kieran Bingham
• Re: [PATCH v7 8/8] media: vsp1: Move video configuration to a cached dlb
  • From: Kieran Bingham
• Re: [PATCH v6] gpio: dwapb: Add support for 1 interrupt per port A GPIO
  • From: Hoan Tran
• Re: [PATCH] clk: renesas: r8a7795: Add CR clock
  • From: Niklas Söderlund
• Re: [PATCH v7 8/8] media: vsp1: Move video configuration to a cached dlb
  • From: Laurent Pinchart
• [PATCH v2 2/2] v4l: Add support for STD ioctls on subdev nodes
  • From: Niklas Söderlund
• [PATCH v2 1/2] v4l2-ioctl: create helper to fill in v4l2_standard for ENUMSTD
  • From: Niklas Söderlund
• [PATCH v2 0/2] v4l: Add support for STD ioctls on subdev nodes
  • From: Niklas Söderlund
• Re: [PATCH 0/2] i2c: mux: demux-pinctrl: improve device relationships
  • From: Wolfram Sang
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Gilad Ben-Yossef
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Gilad Ben-Yossef
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Gilad Ben-Yossef
• Re: [PATCH v9 6/8] media: vsp1: Refactor display list configure operations
  • From: Kieran Bingham
• Re: [PATCH 1/3] crypto: ccree: drop signature register check
  • From: Gilad Ben-Yossef
• Re: [PATCH] v4l: Add support for STD ioctls on subdev nodes
  • From: Niklas Söderlund
• Re: [PATCH v2 1/4] media: rcar-vin: Parse digital input in mc-path
  • From: Niklas Söderlund
• [PATCH] clk: renesas: r8a7795: Add CR clock
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/4] media: rcar-vin: Parse digital input in mc-path
  • From: jacopo mondi
• Re: [PATCH v9 7/8] media: vsp1: Adapt entities to configure into a body
  • From: Laurent Pinchart
• Re: [PATCH v9 6/8] media: vsp1: Refactor display list configure operations
  • From: Laurent Pinchart
• Re: [PATCH 5/6] ARM: dts: rcar-gen2: Remove unused VIN properties
  • From: jacopo mondi
• Re: [PATCH 3/3] sh_eth: add R8A77980 support
  • From: Simon Horman
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Simon Horman
• Re: [PATCH v2 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Simon Horman
• Re: [PATCH] dt-bindings: media: rcar_vin: fix style for ports and endpoints
  • From: Sergei Shtylyov
• Re: [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support
  • From: Simon Horman
• Re: [PATCH] rcar-vin: sync which hardware buffer to start capture from
  • From: Sergei Shtylyov
• Re: [PATCH 3/6] media: rcar-vin: Handle data-active property
  • From: Sergei Shtylyov
• Re: [PATCH 4/6] media: rcar-vin: Handle CLOCKENB pin polarity
  • From: jacopo mondi
• Re: [PATCH 2/3] clk: renesas: r8a7795: Add ccree clock
  • From: Geert Uytterhoeven
• Re: [PATCH 3/6] media: rcar-vin: Handle data-active property
  • From: jacopo mondi
• Re: [PATCH 2/6] dt-bindings: media: rcar-vin: Document data-active
  • From: jacopo mondi
• Re: [PATCH 1/3] sh_eth: add RGMII support
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] sh_eth: add EDMR.NBST support
  • From: Simon Horman
• Re: [PATCH] v4l: Add support for STD ioctls on subdev nodes
  • From: Hans Verkuil
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Gilad Ben-Yossef
• Re: [PATCH 2/3] clk: renesas: r8a7795: Add ccree clock
  • From: Gilad Ben-Yossef
• Re: [PATCH 1/2] arm64: dts: r8a77995: Add MSIOF device nodes
  • From: Wolfram Sang
• Re: [PATCH/RFT v3 0/3] thermal: add support for r8a77995
  • From: Simon Horman
• Re: [PATCH 1/2] arm64: dts: r8a77995: Add MSIOF device nodes
  • From: Simon Horman
• Re: [PATCH 2/2] spi: sh-msiof: Document R-Car D3 support
  • From: Simon Horman
• Re: [PATCH 2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
  • From: Simon Horman
• Re: [PATCH 1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
  • From: Simon Horman
• Re: [PATCH] arm64: dts: r8a77995: Add SCIF-{0,1,3,4,5} device nodes
  • From: Simon Horman
• Re: [PATCH] arm64: dts: r8a77995: Add all HSCIF nodes
  • From: Simon Horman
• Re: [PATCH v2 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: jacopo mondi
• Re: [PATCH v6] gpio: dwapb: Add support for 1 interrupt per port A GPIO
  • From: Lee Jones
• Re: [PATCH v2 2/3] arm64: dts: renesas: draak: Describe CVBS input
  • From: kbuild test robot
• [PATCH] v4l: Add support for STD ioctls on subdev nodes
  • From: Niklas Söderlund
• Re: [PATCH v9 4/8] media: vsp1: Convert display lists to use new body pool
  • From: Laurent Pinchart
• Re: [PATCH v9 3/8] media: vsp1: Provide a body pool
  • From: Laurent Pinchart
• [PATCH] dt-bindings: media: rcar_vin: fix style for ports and endpoints
  • From: Niklas Söderlund
• [PATCH] rcar-vin: sync which hardware buffer to start capture from
  • From: Niklas Söderlund
• [PATCH] rcar-csi2: set default format if a unsupported one is requested
  • From: Niklas Söderlund
• Re: [PATCH v2 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Niklas Söderlund
• Re: [PATCH v2 2/3] arm64: dts: renesas: draak: Describe CVBS input
  • From: Niklas Söderlund
• Re: [PATCH 6/6] ARM: dts: rcar-gen2: Add 'data-active' property
  • From: Niklas Söderlund
• Re: [PATCH 5/6] ARM: dts: rcar-gen2: Remove unused VIN properties
  • From: Niklas Söderlund
• Re: [PATCH 4/6] media: rcar-vin: Handle CLOCKENB pin polarity
  • From: Niklas Söderlund
• Re: [PATCH 3/6] media: rcar-vin: Handle data-active property
  • From: Niklas Söderlund
• Re: [PATCH 2/6] dt-bindings: media: rcar-vin: Document data-active
  • From: Niklas Söderlund
• Re: [PATCH v6] gpio: dwapb: Add support for 1 interrupt per port A GPIO
  • From: Hoan Tran
• Re: [PATCH 1/6] dt-bindings: media: rcar-vin: Describe optional ep properties
  • From: Niklas Söderlund
• Re: [PATCH 0/6] media: rcar-vin: Brush endpoint properties
  • From: Niklas Söderlund
• Re: [PATCH v2 4/4] media: rcar-vin: Add support for R-Car R8A77995 SoC
  • From: Niklas Söderlund
• Re: [PATCH v2 3/4] media: rcar-vin: Handle digital subdev in link_notify
  • From: Niklas Söderlund
• Re: [PATCH v2 2/4] media: rcar-vin: Handle mc in digital notifier ops
  • From: Niklas Söderlund
• Re: [PATCH 1/3] sh_eth: add RGMII support
  • From: Andrew Lunn
• Re: [PATCH 1/3] sh_eth: add RGMII support
  • From: Sergei Shtylyov
• Re: [PATCH v2 1/4] media: rcar-vin: Parse digital input in mc-path
  • From: Niklas Söderlund
• Re: [PATCH 1/3] sh_eth: add RGMII support
  • From: Andrew Lunn
• Re: [PATCH net-next v2 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Sergei Shtylyov
• [PATCH 3/3] sh_eth: add R8A77980 support
  • From: Sergei Shtylyov
• [PATCH 2/3] sh_eth: add EDMR.NBST support
  • From: Sergei Shtylyov
• [PATCH 1/3] sh_eth: add RGMII support
  • From: Sergei Shtylyov
• [PATCH 0/3] Add R8A77980 GEther support
  • From: Sergei Shtylyov
• Re: [PATCH/RFT v3 0/3] thermal: add support for r8a77995
  • From: Niklas Söderlund
• Re: [PATCH net-next v2 0/2] of: mdio: Fall back to mdiobus_register() with NULL device_node
  • From: Geert Uytterhoeven
• Re: [PATCH net-next v2 0/2] of: mdio: Fall back to mdiobus_register() with NULL device_node
  • From: David Miller
• Re: [PATCH 1/2] arm64: dts: r8a77995: Add MSIOF device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support
  • From: Sergei Shtylyov
• Re: [PATCH net-next 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: kbuild test robot
• [PATCH 2/6] dt-bindings: media: rcar-vin: Document data-active
  • From: Jacopo Mondi
• [PATCH 3/6] media: rcar-vin: Handle data-active property
  • From: Jacopo Mondi
• [PATCH 4/6] media: rcar-vin: Handle CLOCKENB pin polarity
  • From: Jacopo Mondi
• [PATCH 6/6] ARM: dts: rcar-gen2: Add 'data-active' property
  • From: Jacopo Mondi
• [PATCH 5/6] ARM: dts: rcar-gen2: Remove unused VIN properties
  • From: Jacopo Mondi
• [PATCH 1/6] dt-bindings: media: rcar-vin: Describe optional ep properties
  • From: Jacopo Mondi
• [PATCH 0/6] media: rcar-vin: Brush endpoint properties
  • From: Jacopo Mondi
• [PATCH v2 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: Jacopo Mondi
• [PATCH v2 2/3] arm64: dts: renesas: draak: Describe CVBS input
  • From: Jacopo Mondi
• [PATCH v2 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Jacopo Mondi
• [PATCH v2 0/3] arm64: dts: Draak: Enable video inputs and VIN4
  • From: Jacopo Mondi
• Re: [PATCH/RFT v3 0/3] thermal: add support for r8a77995
  • From: Ulrich Hecht
• Re: [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support
  • From: Ulrich Hecht
• [PATCH 2/2] dmaengine: rcar-dmac: Document R8A77990 bindings
  • From: Ulrich Hecht
• [PATCH 1/2] dmaengine: usb-dmac: Document R8A7799{0,5} bindings
  • From: Ulrich Hecht
• [PATCH 2/2] spi: sh-msiof: Document R-Car D3 support
  • From: Ulrich Hecht
• [PATCH 1/2] arm64: dts: r8a77995: Add MSIOF device nodes
  • From: Ulrich Hecht
• [PATCH] arm64: dts: r8a77995: Add SCIF-{0,1,3,4,5} device nodes
  • From: Ulrich Hecht
• [PATCH] arm64: dts: r8a77995: Add all HSCIF nodes
  • From: Ulrich Hecht
• Re: [PATCH net-next v2 0/2] of: mdio: Fall back to mdiobus_register() with NULL device_node
  • From: Andrew Lunn
• [PATCH v2 4/4] media: rcar-vin: Add support for R-Car R8A77995 SoC
  • From: Jacopo Mondi
• [PATCH v2 2/4] media: rcar-vin: Handle mc in digital notifier ops
  • From: Jacopo Mondi
• [PATCH v2 3/4] media: rcar-vin: Handle digital subdev in link_notify
  • From: Jacopo Mondi
• [PATCH v2 1/4] media: rcar-vin: Parse digital input in mc-path
  • From: Jacopo Mondi
• [PATCH v2 0/4] rcar-vin: Add support for digital input on Gen3
  • From: Jacopo Mondi
• Re: [PATCH net-next v2 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Jose Abreu
• [ANNOUNCE] Renesas tree closed for v4.18
  • From: Simon Horman
• [PATCH v3 01/26] drm/bridge: allow optionally specifying an owner .odev device
  • From: Peter Rosin
• [PATCH v3 00/26] device link, bridge supplier <-> drm device
  • From: Peter Rosin
• [PATCH v3 22/26] drm/rcar-du: lvds: provide an owner .odev device for the bridge
  • From: Peter Rosin
• [PATCH v3 25/26] drm/bridge: require the owner .odev to be filled in on drm_bridge_add/attach
  • From: Peter Rosin
• [PATCH v3 24/26] drm/bridge: remove the .of_node member
  • From: Peter Rosin
• [PATCH v3 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Peter Rosin
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Daniel Vetter
• Re: [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support
  • From: Sergei Shtylyov
• Re: [PATCH v2 2/2] soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}
  • From: Simon Horman
• Re: [PATCH v2 1/2] soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
  • From: Simon Horman
• Re: [PATCH v2] ARM: dts: r8a7740: Add CEU1
  • From: Simon Horman
• Re: [PATCH net-next v2 0/2] of: mdio: Fall back to mdiobus_register() with NULL device_node
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] ARM: dts: r8a7740: Add CEU0
  • From: Simon Horman
• Re: [PATCH 5/5] arm64: dts: renesas: r8a77995-draak: add X12 input dot clock
  • From: Simon Horman
• Re: [PATCH 4/5] arm64: dts: renesas: r8a77995-draak: add HDMI output
  • From: Simon Horman
• Re: [PATCH 3/5] arm64: dts: renesas: r8a77995: Add LVDS support
  • From: Simon Horman
• Re: [PATCH 1/5] drm: rcar-du: Add r8a77995 device support
  • From: Simon Horman
• Re: [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support
  • From: Simon Horman
• Re: [PATCH 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: Simon Horman
• Re: [PATCH v2 2/2] soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Simon Horman
• Re: [PATCH v2] ARM: dts: r8a7740: Add CEU1
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] ARM: dts: r8a7740: Add CEU0
  • From: Geert Uytterhoeven
• Re: [PATCH 0/7] arm64: dts: renesas: enable VIN, CSI-2 and ADV7482
  • From: Simon Horman
• Re: [RFT] arm64: dts: r8a77965: add I2C support
  • From: Simon Horman
• Re: [PATCH 4/4] arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
  • From: Simon Horman
• Re: [PATCH 3/4] arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
  • From: Simon Horman
• Re: [PATCH 2/4] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Simon Horman
• Re: [PATCH 1/4] arm64: dts: renesas: r8a77990: Add PFC device node
  • From: Simon Horman
• Re: [PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree
  • From: Simon Horman
• Re: [PATCH v2] ARM: dts: r8a7740: Add CEU1
  • From: Simon Horman
• Re: [PATCH] ARM: multi_v7_defconfig: Enable RENESAS_WDT
  • From: Simon Horman
• Re: [PATCH net-next v2 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Antoine Tenart
• [PATCH 7/7] arm64: dts: renesas: salvator-common: enable VIN
  • From: Niklas Söderlund
• [PATCH 6/7] arm64: dts: renesas: salvator-common: Add ADV7482 support
  • From: Niklas Söderlund
• [PATCH 5/7] arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
  • From: Niklas Söderlund
• [PATCH 4/7] arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
  • From: Niklas Söderlund
• [PATCH 3/7] arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
  • From: Niklas Söderlund
• [PATCH 2/7] arm64: dts: renesas: r8a7795-es1: add CSI-2 node
  • From: Niklas Söderlund
• [PATCH 1/7] arm64: dts: renesas: r8a7795: add VIN and CSI-2 nodes
  • From: Niklas Söderlund
• [PATCH 0/7] arm64: dts: renesas: enable VIN, CSI-2 and ADV7482
  • From: Niklas Söderlund
• RE: [PATCH net-next v2 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Andy Duan
• Re: [PATCH net-next v2 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Grygorii Strashko
• [PATCH net-next v2 0/2] of: mdio: Fall back to mdiobus_register() with NULL device_node
  • From: Florian Fainelli
• [PATCH net-next v2 1/2] of: mdio: Fall back to mdiobus_register() with NULL device_node
  • From: Florian Fainelli
• [PATCH net-next v2 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Florian Fainelli
• Re: [PATCH net-next 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Florian Fainelli
• Re: [PATCH net-next 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Grygorii Strashko
• Re: [git pull] clk: renesas: Updates for v4.18
  • From: Stephen Boyd
• [PATCH net-next 2/2] drivers: net: Remove device_node checks with of_mdiobus_register()
  • From: Florian Fainelli
• [PATCH net-next 1/2] of: mdio: Fall back to mdiobus_register() with np is NULL
  • From: Florian Fainelli
• [PATCH net-next 0/2] of: mdio: Fall back to mdiobus_register() with np is NULL
  • From: Florian Fainelli
• Re: [PATCH 05/61] clk: samsung: simplify getting .drvdata
  • From: Stephen Boyd
• Re: [PATCH 05/61] clk: samsung: simplify getting .drvdata
  • From: Stephen Boyd
• Re: [PATCH] drm: rcar-du: Fix rcar_du_of_init() stub
  • From: Kieran Bingham
• Re: [PATCH/RFT v3 1/3] thermal: rcar_thermal: add r8a77995 support
  • From: Yoshihiro Kaneko
• Re: [PATCH] drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays
  • From: Laurent Pinchart
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] clk: renesas: r8a7795: Add ccree clock
  • From: Geert Uytterhoeven
• Re: Booting Salvator-X ES1 board with upstream kernel
  • From: Geert Uytterhoeven
• renesas-drivers-2018-05-15-v4.17-rc5
  • From: Geert Uytterhoeven
• Re: [git pull] pinctrl: sh-pfc: Updates for v4.18
  • From: Linus Walleij
• Re: Booting Salvator-X ES1 board with upstream kernel
  • From: Gilad Ben-Yossef
• [PATCH 0/3] enable ccree on Renesas R-Car platform
  • From: Gilad Ben-Yossef
• [PATCH 1/3] crypto: ccree: drop signature register check
  • From: Gilad Ben-Yossef
• [PATCH 2/3] clk: renesas: r8a7795: Add ccree clock
  • From: Gilad Ben-Yossef
• [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
  • From: Gilad Ben-Yossef
• [PATCH 5/5] arm64: dts: renesas: r8a77995-draak: add X12 input dot clock
  • From: Ulrich Hecht
• [PATCH 4/5] arm64: dts: renesas: r8a77995-draak: add HDMI output
  • From: Ulrich Hecht
• [PATCH 3/5] arm64: dts: renesas: r8a77995: Add LVDS support
  • From: Ulrich Hecht
• [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support
  • From: Ulrich Hecht
• [PATCH 1/5] drm: rcar-du: Add r8a77995 device support
  • From: Ulrich Hecht
• [PATCH 0/5] R-Car D3 LVDS/HDMI support
  • From: Ulrich Hecht
• [PATCH v2 2/2] soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}
  • From: Yoshihiro Shimoda
• [PATCH v2 1/2] soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
  • From: Yoshihiro Shimoda
• [PATCH v2 0/2] soc: renesas: r8a77990-sysc: Add support for R-Car E3
  • From: Yoshihiro Shimoda
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Peter Rosin
• RE: [PATCH/RFC v3 1/4] base: devcon: add a new API to find the graph
  • From: Yoshihiro Shimoda
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Daniel Vetter
• Re: [PATCH 26/61] media: platform: exynos4-is: simplify getting .drvdata
  • From: Sylwester Nawrocki
• Re: [PATCH 27/61] media: platform: s5p-mfc: simplify getting .drvdata
  • From: Sylwester Nawrocki
• Re: [PATCH] pinctrl: sh-pfc: r8a77965: Add I2C pin support
  • From: Geert Uytterhoeven
• RE: [PATCH v2 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Fabrizio Castro
• Re: [PATCH 05/61] clk: samsung: simplify getting .drvdata
  • From: Sylwester Nawrocki
• Re: [PATCH v2 1/2] Revert "media: rcar-vin: enable field toggle after a set number of lines for Gen3"
  • From: Kieran Bingham
• Re: [PATCH v2 2/2] rcar-vin: fix crop and compose handling for Gen3
  • From: Kieran Bingham
• Re: [PATCH v16 0/2] rcar-csi2: add Renesas R-Car MIPI CSI-2
  • From: Sakari Ailus
• Re: [PATCH 6/6] pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions
  • From: Geert Uytterhoeven
• Re: [PATCH 5/6] pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions
  • From: Geert Uytterhoeven
• Re: [PATCH 4/6] pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions
  • From: Geert Uytterhoeven
• Re: [PATCH] dt-bindings: net: ravb: Add support for r8a77990 SoC
  • From: Sergei Shtylyov
• Re: [PATCH 3/6] pinctrl: sh-pfc: r8a77990: Add bias pinconf support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: jacopo mondi
• RE: [PATCH/RFC v3 3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
  • From: Yoshihiro Shimoda
• Re: [PATCH/RFC v3 1/4] base: devcon: add a new API to find the graph
  • From: Heikki Krogerus
• Re: [PATCH v2] ARM: dts: r8a7740: Add CEU1
  • From: jacopo mondi
• Re: [PATCH/RFC v3 3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
  • From: Simon Horman
• RE: [PATCH/RFC v3 3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
  • From: Yoshihiro Shimoda
• Re: [PATCH] ARM: dts: r8a7740: Add CEU1
  • From: Simon Horman
• [PATCH v2] ARM: dts: r8a7740: Add CEU1
  • From: Simon Horman
• Re: [PATCH 0/2] Revert explicit support for Renesas R-Car Gen 3 r8a779[56] SoCs
  • From: Rafael J. Wysocki
• Re: [PATCH v2 6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
  • From: Simon Horman
• Re: [PATCH/RFC v3 3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
  • From: Simon Horman
• RE: [PATCH v2 6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
  • From: Yoshihiro Shimoda
• Re: [PATCH v2 0/2] Fix potential buffer overrun root cause
  • From: Simon Horman
• Re: [PATCH] drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays
  • From: Simon Horman
• Re: [PATCH v6] gpio: dwapb: Add support for 1 interrupt per port A GPIO
  • From: Simon Horman
• Re: [PATCH 0/2] Revert explicit support for Renesas R-Car Gen 3 r8a779[56] SoCs
  • From: Simon Horman
• Re: [PATCH v2 6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
  • From: Simon Horman
• Re: [PATCH v2 5/6] usb: gadget: udc: renesas_usb3: should fail if devm_phy_get() returns error
  • From: Simon Horman
• Re: [PATCH/RFT v3 1/3] thermal: rcar_thermal: add r8a77995 support
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a7740: Add CEU1
  • From: jacopo mondi
• Re: [PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings
  • From: Simon Horman
• Re: [PATCH v16 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: jacopo mondi
• Re: [PATCH] media: dt-bindings: media: rcar_vin: add support for r8a77965
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a7740: Add CEU1
  • From: Simon Horman
• Re: [PATCH 0/3] arm64: dts: Draak: Enable HDMI input and VIN4
  • From: Simon Horman
• Re: [PATCH 2/3] arm64: dts: renesas: r8a77995: Add VIN4
  • From: Simon Horman
• Re: [PATCH v16 0/2] rcar-csi2: add Renesas R-Car MIPI CSI-2
  • From: Laurent Pinchart
• RE: [PATCH/RFC v3 1/4] base: devcon: add a new API to find the graph
  • From: Yoshihiro Shimoda
• [PATCH v16 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• [PATCH v16 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• [PATCH v16 0/2] rcar-csi2: add Renesas R-Car MIPI CSI-2
  • From: Niklas Söderlund
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Peter Rosin
• Re: [PATCH 0/3] arm64: dts: Draak: Enable HDMI input and VIN4
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 1/4] arm64: dts: renesas: r8a77990: Add PFC device node
  • From: Geert Uytterhoeven
• Re: [PATCH 3/6] pinctrl: sh-pfc: r8a77990: Add bias pinconf support
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments
  • From: Niklas Söderlund
• [PATCH] pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments
  • From: Geert Uytterhoeven
• Re: [PATCH v15 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Laurent Pinchart
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Laurent Pinchart
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Daniel Vetter
• Re: [PATCH] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Sergei Shtylyov
• Re: [PATCH V5] PCI: rcar: Use runtime PM to control controller clock
  • From: Lorenzo Pieralisi
• Re: [PATCH 2/6] pinctrl: sh-pfc: Initial R8A77990 PFC support
  • From: Geert Uytterhoeven
• Re: [PATCH V5] PCI: rcar: Use runtime PM to control controller clock
  • From: Marek Vasut
• Re: [PATCH 1/6] pinctrl: sh-pfc: Add PORT_GP_11 helper macro
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC v3 1/4] base: devcon: add a new API to find the graph
  • From: Randy Dunlap
• [PATCH] arm64: dts: renesas: r8a77995: don't use deprecated renesas,gpio-rcar
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Simon Horman
• Re: Booting Salvator-X ES1 board with upstream kernel
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] fbdev/drm: sh_mobile: remove unused MERAM support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH/RFC v3 1/4] base: devcon: add a new API to find the graph
  • From: Heikki Krogerus
• Re: [PATCH v15 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: jacopo mondi
• Re: [PATCH v15 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: jacopo mondi
• Re: [GIT PULL FOR renesas-drivers] drm/du/m3n
  • From: Kieran Bingham
• Re: [GIT PULL FOR renesas-drivers] drm/du/m3n
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Niklas Söderlund
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Niklas Söderlund
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Niklas Söderlund
• [PATCH/RFC v3 4/4] arm64: dts: renesas: r8a7795: add OF graph for usb role switch
  • From: Yoshihiro Shimoda
• [PATCH/RFC v3 3/4] usb: gadget: udc: renesas_usb3: use usb role switch API
  • From: Yoshihiro Shimoda
• [PATCH/RFC v3 1/4] base: devcon: add a new API to find the graph
  • From: Yoshihiro Shimoda
• [PATCH/RFC v3 2/4] usb: gadget: udc: renesas_usb3: Add register of usb role switch
  • From: Yoshihiro Shimoda
• [PATCH/RFC v3 0/4] usb: role: rcar-usb3-role-switch: add support for R-Car SoCs
  • From: Yoshihiro Shimoda
• Re: [PATCH 2/5] media: rcar-vin: Add digital input subdevice parsing
  • From: jacopo mondi
• Re: [GIT PULL] Renesas ARM Based SoC Fixes for v4.17
  • From: Olof Johansson
• Re: [PATCH v15 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Maxime Ripard
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: jacopo mondi
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Laurent Pinchart
• Re: [PATCH 1/5] media: rcar-vin: Add support for R-Car R8A77995 SoC
  • From: Laurent Pinchart
• Re: [PATCH 2/3] arm64: dts: renesas: r8a77995: Add VIN4
  • From: Laurent Pinchart
• Re: [PATCH 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: Laurent Pinchart
• RE: [PATCH/RFC v2 1/6] dt-bindings: usb: add Renesas R-Car USB 3.0 role switch
  • From: Yoshihiro Shimoda
• Re: [PATCH] media: rcar-vin: enable support for r8a77965
  • From: Laurent Pinchart
• Re: [PATCH v15 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Laurent Pinchart
• Re: [PATCH v15 0/2] rcar-csi2: add Renesas R-Car MIPI CSI-2
  • From: Laurent Pinchart
• [PATCH v15 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• [PATCH v15 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• [PATCH v15 0/2] rcar-csi2: add Renesas R-Car MIPI CSI-2
  • From: Niklas Söderlund
• Re: [PATCH v14 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• [PATCH] media: rcar-vin: enable support for r8a77965
  • From: Niklas Söderlund
• [PATCH] media: dt-bindings: media: rcar_vin: add support for r8a77965
  • From: Niklas Söderlund
• Re: [PATCH 2/3] arm64: dts: renesas: r8a77995: Add VIN4
  • From: jacopo mondi
• Re: [PATCH] media: rcar-vin: Drop unnecessary register properties from example vin port
  • From: Niklas Söderlund
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Niklas Söderlund
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Niklas Söderlund
• Re: [RFT] arm64: dts: r8a77965: add I2C support
  • From: Niklas Söderlund
• [PATCH] pinctrl: sh-pfc: r8a77965: Add I2C pin support
  • From: Niklas Söderlund
• Re: [PATCH 4/4] arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
  • From: Simon Horman
• Re: [PATCH 3/4] arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Sergei Shtylyov
• [PATCH] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Simon Horman
• Re: [PATCH 2/4] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Simon Horman
• Re: [PATCH 0/2] Disable EtherAVB by default on R8A779{7|8}0 SoCs
  • From: Simon Horman
• Re: [PATCH v4 0/4] mmc: renesas_sdhi: add eMMC HS400 mode support
  • From: Simon Horman
• Re: [RFT] arm64: dts: r8a77965: add I2C support
  • From: Simon Horman
• Re: [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Simon Horman
• Re: [PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings
  • From: Simon Horman
• Re: [PATCH 1/4] arm64: dts: renesas: r8a77990: Add PFC device node
  • From: Simon Horman
• Re: [PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree
  • From: Simon Horman
• Re: [PATCH] dt-bindings: net: ravb: Add support for r8a77990 SoC
  • From: Simon Horman
• Re: [PATCH] dt-bindings: gpio: rcar: Add support for r8a77990
  • From: Simon Horman
• Re: [PATCH v2 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Simon Horman
• Re: [PATCH/RFC 0/2] regulator: bd9571mwv: Add support for toggle power switches
  • From: Mark Brown
• Re: [PATCH v2] media: i2c: adv748x: Fix pixel rate values
  • From: Niklas Söderlund
• Re: [PATCH] arm64: dts: renesas: r8a77970: add SMP support
  • From: Simon Horman
• Re: [PATCH 5/5] media: rcar-vin: Use FTEV for digital input
  • From: Sergei Shtylyov
• [GIT PULL FOR renesas-drivers] drm/du/m3n
  • From: Kieran Bingham
• Re: [PATCH v2] media: i2c: adv748x: Fix pixel rate values
  • From: Kieran Bingham
• [PATCH 2/2] arm64: dts: renesas: r8a77980: disable EtherAVB
  • From: Sergei Shtylyov
• [PATCH 1/2] arm64: dts: renesas: r8a77970: disable EtherAVB
  • From: Sergei Shtylyov
• [PATCH 0/2] Disable EtherAVB by default on R8A779{7|8}0 SoCs
  • From: Sergei Shtylyov
• Re: [PATCH] dt-bindings: net: ravb: Add support for r8a77990 SoC
  • From: David Miller
• Re: [PATCH v3 1/2] vfio: platform: Fix reset module leak in error path
  • From: Alex Williamson
• Re: [PATCH/RFC v2 1/6] dt-bindings: usb: add Renesas R-Car USB 3.0 role switch
  • From: Rob Herring
• Re: [PATCH v2 2/2] rcar-vin: fix crop and compose handling for Gen3
  • From: Sergei Shtylyov
• Re: [PATCH 5/5] media: rcar-vin: Use FTEV for digital input
  • From: jacopo mondi
• [PATCH v2 2/2] rcar-vin: fix crop and compose handling for Gen3
  • From: Niklas Söderlund
• [PATCH v2 1/2] Revert "media: rcar-vin: enable field toggle after a set number of lines for Gen3"
  • From: Niklas Söderlund
• [PATCH v2 0/2] Fix potential buffer overrun root cause
  • From: Niklas Söderlund
• [PATCH] drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays
  • From: Rob Herring
• Re: [PATCH 1/2] Revert "media: rcar-vin: enable field toggle after a set number of lines for Gen3"
  • From: Hans Verkuil
• [PATCH 2/2] rcar-vin: fix crop and compose handling for Gen3
  • From: Niklas Söderlund
• [PATCH 1/2] Revert "media: rcar-vin: enable field toggle after a set number of lines for Gen3"
  • From: Niklas Söderlund
• [PATCH 0/2] rcar-vin: Fix potential buffer overrun root cause
  • From: Niklas Söderlund
• [PATCH v2] media: i2c: adv748x: Fix pixel rate values
  • From: Niklas Söderlund
• [RFT] arm64: dts: r8a77965: add I2C support
  • From: Niklas Söderlund
• Re: [PATCH 2/3] arm64: dts: renesas: r8a77995: Add VIN4
  • From: Simon Horman
• Re: [PATCH 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: Simon Horman
• Re: [PATCH 6/9] NTB: ntb_hw_idt: fix typo 'can by' to 'can be'
  • From: Serge Semin
• Re: [PATCH 4/5] media: rcar-vin: Do not use crop if not configured
  • From: Niklas Söderlund
• Re: [PATCH 2/3] arm64: dts: renesas: r8a77995: Add VIN4
  • From: Niklas Söderlund
• Re: [PATCH 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: Niklas Söderlund
• Re: [PATCH 5/5] convert: Accept destination format as parameter
  • From: Niklas Söderlund
• Re: [PATCH 4/5] yavta-hdmi: Generalize capture parameters
  • From: Niklas Söderlund
• Re: [PATCH 3/5] gen3-links: Support linking for digital input
  • From: Niklas Söderlund
• Re: [PATCH 2/5] vin-tests: Add function to propagate digital format
  • From: Niklas Söderlund
• Re: [PATCH 1/5] boards: Add R8A77995 D3 Draak board
  • From: Niklas Söderlund
• Re: [PATCH 4/5] media: rcar-vin: Do not use crop if not configured
  • From: Niklas Söderlund
• Re: [PATCH 2/5] media: rcar-vin: Add digital input subdevice parsing
  • From: Niklas Söderlund
• Re: [PATCH 1/5] media: rcar-vin: Add support for R-Car R8A77995 SoC
  • From: Niklas Söderlund
• Re: [PATCH 5/5] media: rcar-vin: Use FTEV for digital input
  • From: Hans Verkuil
• [PATCH 0/3] arm64: dts: Draak: Enable HDMI input and VIN4
  • From: Jacopo Mondi
• [PATCH 1/3] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: Jacopo Mondi
• [PATCH 4/5] yavta-hdmi: Generalize capture parameters
  • From: Jacopo Mondi
• [PATCH 5/5] convert: Accept destination format as parameter
  • From: Jacopo Mondi
• [PATCH 3/5] gen3-links: Support linking for digital input
  • From: Jacopo Mondi
• [PATCH 1/5] boards: Add R8A77995 D3 Draak board
  • From: Jacopo Mondi
• [PATCH 2/5] vin-tests: Add function to propagate digital format
  • From: Jacopo Mondi
• [PATCH 0/5] vin-tests: Add D3 Draak support
  • From: Jacopo Mondi
• [PATCH 3/3] arm64: dts: renesas: draak: Describe HDMI input
  • From: Jacopo Mondi
• [PATCH 2/3] arm64: dts: renesas: r8a77995: Add VIN4
  • From: Jacopo Mondi
• [PATCH 5/5] media: rcar-vin: Use FTEV for digital input
  • From: Jacopo Mondi
• [PATCH 3/5] media: rcar-vin: [un]bind and link digital subdevice
  • From: Jacopo Mondi
• [PATCH 4/5] media: rcar-vin: Do not use crop if not configured
  • From: Jacopo Mondi
• [PATCH 2/5] media: rcar-vin: Add digital input subdevice parsing
  • From: Jacopo Mondi
• [PATCH 1/5] media: rcar-vin: Add support for R-Car R8A77995 SoC
  • From: Jacopo Mondi
• [PATCH 0/5] rcar-vin: Add support for digital input on Gen3
  • From: Jacopo Mondi
• Re: [PATCH] dt-bindings: net: ravb: Add support for r8a77990 SoC
  • From: Sergei Shtylyov
• [PATCH v6] gpio: dwapb: Add support for 1 interrupt per port A GPIO
  • From: Phil Edworthy
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Peter Rosin
• [PATCH 2/4] arm64: dts: renesas: r8a77990: Add GPIO device nodes
  • From: Yoshihiro Shimoda
• [PATCH 4/4] arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
  • From: Yoshihiro Shimoda
• [PATCH 3/4] arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
  • From: Yoshihiro Shimoda
• [PATCH 0/4] arm64: dts: renesas: r8a77990: Enable EthernetAVB for ebisu board
  • From: Yoshihiro Shimoda
• [PATCH 1/4] arm64: dts: renesas: r8a77990: Add PFC device node
  • From: Yoshihiro Shimoda
• [PATCH 6/6] pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions
  • From: Yoshihiro Shimoda
• [PATCH 3/6] pinctrl: sh-pfc: r8a77990: Add bias pinconf support
  • From: Yoshihiro Shimoda
• [PATCH 4/6] pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions
  • From: Yoshihiro Shimoda
• [PATCH 2/6] pinctrl: sh-pfc: Initial R8A77990 PFC support
  • From: Yoshihiro Shimoda
• [PATCH 5/6] pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions
  • From: Yoshihiro Shimoda
• [PATCH 1/6] pinctrl: sh-pfc: Add PORT_GP_11 helper macro
  • From: Yoshihiro Shimoda
• [PATCH 0/6] pinctrl: sh-pfc: Initial R8A77990 PFC support
  • From: Yoshihiro Shimoda
• [PATCH] dt-bindings: net: ravb: Add support for r8a77990 SoC
  • From: Yoshihiro Shimoda
• RE: [PATCH] dt-bindings: net: ravb: Add support for r8a77990 SoC
  • From: Yoshihiro Shimoda
• [PATCH] dt-bindings: net: ravb: Add support for r8a77990 SoC
  • From: Yoshihiro Shimoda
• [PATCH] dt-bindings: gpio: rcar: Add support for r8a77990
  • From: Yoshihiro Shimoda
• [PATCH 2/2] arm64: dts: renesas: initial V3HSK board device tree
  • From: Sergei Shtylyov
• [PATCH 1/2] dt-bindings: arm: document Renesas V3HSK board bindings
  • From: Sergei Shtylyov
• [PATCH 0/2] Add V3H Starter Kit board support
  • From: Sergei Shtylyov
• Re: [PATCH] arm64: dts: renesas: r8a77970: add SMP support
  • From: Sergei Shtylyov
• Re: [2/9] powerpc/watchdog: fix typo 'can by' to 'can be'
  • From: Michael Ellerman
• Re: [PATCH 1/9] dt-bindings: i2c: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• Re: [PATCH 0/2] Revert explicit support for Renesas R-Car Gen 3 r8a779[56] SoCs
  • From: Rafael J. Wysocki
• Re: Booting Salvator-X ES1 board with upstream kernel
  • From: Gilad Ben-Yossef
• Re: Booting Salvator-X ES1 board with upstream kernel
  • From: Magnus Damm
• Booting Salvator-X ES1 board with upstream kernel
  • From: Gilad Ben-Yossef
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Andrzej Hajda
• RE: [PATCH v2 0/6] usb: gadget: udc: renesas_usb3: fix some major issues
  • From: Yoshihiro Shimoda
• Re: [PATCH v2 25/26] drm/bridge: require the owner .odev to be filled in on drm_bridge_add/attach
  • From: Andrzej Hajda
• Re: [PATCH v2 01/26] drm/bridge: allow optionally specifying an owner .odev device
  • From: Andrzej Hajda
• Re: [PATCH v2 01/26] drm/bridge: allow optionally specifying an owner .odev device
  • From: Peter Rosin
• Re: [PATCH] arm64: dts: renesas: r8a77980: add resets property CAN-FD node
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77980: add resets property CAN-FD node
  • From: Sergei Shtylyov
• Re: [PATCH] arm64: dts: renesas: r8a77980: add resets property CAN-FD node
  • From: Simon Horman
• Re: [PATCH 0/8] ARM: dts: renesas: Add PMU device nodes
  • From: Simon Horman
• Re: [PATCH v2 0/2] arm64: dts: renesas: r8a77970: Add SMP Support
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77970: add SMP support
  • From: Simon Horman
• Re: [PATCH 0/2] ARM: dts: r7s72100: Correct interrupt types
  • From: Simon Horman
• Re: [PATCH 00/10] ARM, arm64: dts: renesas: update register properties
  • From: Simon Horman
• [PATCH] media: rcar-vin: Drop unnecessary register properties from example vin port
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77980: add resets property CAN-FD node
  • From: Geert Uytterhoeven
• Re: [PATCH/RFT v3 1/3] thermal: rcar_thermal: add r8a77995 support
  • From: Simon Horman
• Re: [PATCH/RFT v2 1/3] thermal: rcar_thermal: add r8a77995 support
  • From: Simon Horman
• Re: [PATCH/RFT v3 2/3] dt-bindings: thermal: rcar-thermal: add R8A77995 support
  • From: Simon Horman
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77980: add CAN-FD support
  • From: Simon Horman
• [PATCH] arm64: dts: renesas: r8a77980: add resets property CAN-FD node
  • From: Simon Horman
• Re: [PATCH v2] arm64: dts: r8a77965: Add SDHI device nodes
  • From: Simon Horman
• [git pull] pinctrl: sh-pfc: Updates for v4.18
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] clk: renesas: cpg-mssr: Add support for R-Car E3
  • From: Geert Uytterhoeven
• [git pull] pinctrl: sh-pfc: Updates for v4.17 (take two)
  • From: Geert Uytterhoeven
• [git pull] clk: renesas: Updates for v4.18
  • From: Geert Uytterhoeven
• Re: [PATCH v2 01/26] drm/bridge: allow optionally specifying an owner .odev device
  • From: Peter Rosin
• [PATCH v2 1/2] arm64: dts: renesas: r8a77970: Add secondary CA53 CPU core
  • From: Geert Uytterhoeven
• [PATCH v2 0/2] arm64: dts: renesas: r8a77970: Add SMP Support
  • From: Geert Uytterhoeven
• [PATCH v2 2/2] arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU node
  • From: Geert Uytterhoeven
• Re: [PATCH v2 01/26] drm/bridge: allow optionally specifying an owner .odev device
  • From: Andrzej Hajda
• Re: [PATCH 0/8] ARM: dts: renesas: Add PMU device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH v2] arm64: dts: r8a77965: Add SDHI device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH/RFT v2 1/3] thermal: rcar_thermal: add r8a77995 support
  • From: Yoshihiro Kaneko
• Re: [PATCH v2] mmc: renesas_sdhi: Add r8a77965 support
  • From: Wolfram Sang
• [PATCH v2] mmc: renesas_sdhi: Add r8a77965 support
  • From: Yoshihiro Kaneko
• [PATCH v2] arm64: dts: r8a77965: Add SDHI device nodes
  • From: Yoshihiro Kaneko
• RE: [PATCH v5] gpio: dwapb: Add support for 1 interrupt per port A GPIO
  • From: Phil Edworthy
• Re: [PATCH v9 00/12] Sunxi: Add SMP support on A83T
  • From: Maxime Ripard
• Re: [PATCH 5/9] input: ati_remote2: fix typo 'can by' to 'can be'
  • From: Dmitry Torokhov
• Re: [PATCH] i2c: busses: remove superfluous ignoring of children for RPM
  • From: Wolfram Sang
• Re: [PATCH] arm64: dts: renesas: r8a77970: add SMP support
  • From: Sergei Shtylyov
• Re: [PATCH] arm64: dts: renesas: r8a77970: add SMP support
  • From: Geert Uytterhoeven
• Re: [PATCH v9 00/12] Sunxi: Add SMP support on A83T
  • From: Florian Fainelli
• [PATCH] arm64: dts: renesas: r8a77970: add SMP support
  • From: Sergei Shtylyov
• Re: [PATCH igt 0/8] Non-Intel test suite fixes
  • From: Ulrich Hecht
• Re: [PATCH 0/2] ARM: dts: renesas: Add missing interrupt-affinity to PMU
  • From: Simon Horman
• Re: [PATCH v3 0/2] ARM: dts: renesas: Correct mask for GIC PPI interrupts
  • From: Simon Horman
• Re: [PATCH v2 2/2] ARM: dts: r8a7740: Add CEU0
  • From: Simon Horman
• Re: [PATCH] ARM: shmobile: r8a7794: alt: add EEPROM to DTS
  • From: Simon Horman
• Re: [PATCH v9 00/12] Sunxi: Add SMP support on A83T
  • From: Maxime Ripard
• Re: [PATCH v9 01/12] ARM: Allow this header to be included by assembly files
  • From: Russell King - ARM Linux
• Re: [PATCH] PCI: rcar: Reuse generic pci_parse_request_of_pci_ranges() function
  • From: Lorenzo Pieralisi
• Re: [PATCH] ARM: shmobile: r8a7794: alt: add EEPROM to DTS
  • From: Geert Uytterhoeven
• Re: [PATCH v7 05/11] ARM: smp: Add initialization of CNTVOFF
  • From: Russell King - ARM Linux
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Andrzej Hajda
• Re: [PATCH v9 07/12] ARM: sunxi: Add initialization of CNTVOFF
  • From: Marc Zyngier
• Re: [PATCH v9 06/12] ARM: smp: Add initialization of CNTVOFF
  • From: Marc Zyngier
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Andrzej Hajda
• Re: [PATCH 4/9] hwmon: fschmd: fix typo 'can by' to 'can be'
  • From: Guenter Roeck
• Re: [PATCH v3] watchdog: renesas-wdt: Add support for the R8A77965 WDT
  • From: Guenter Roeck
• Re: [PATCH 8/9] net: flow_dissector: fix typo 'can by' to 'can be'
  • From: David Miller
• RE: [PATCH/RFC v2 1/6] dt-bindings: usb: add Renesas R-Car USB 3.0 role switch
  • From: Yoshihiro Shimoda
• Re: [PATCH] media: vsp1: cleanup a false positive warning
  • From: Mauro Carvalho Chehab
• RE: [PATCH 0/2] ARM: dts: r7s72100: Correct interrupt types
  • From: Chris Brandt
• Re: [PATCH v2 00/26] device link, bridge supplier <-> drm device
  • From: Peter Rosin
• Re: [PATCH] media: vsp1: cleanup a false positive warning
  • From: Laurent Pinchart
• [PATCH 6/8] ARM: dts: r8a7794: Add PMU device node
  • From: Geert Uytterhoeven
• [PATCH 8/8] ARM: dts: r8a7745: Add PMU device node
  • From: Geert Uytterhoeven
• [PATCH 4/8] ARM: dts: r8a7792: Add PMU device node
  • From: Geert Uytterhoeven
• [PATCH 1/8] ARM: dts: r7s72100: Add PMU device node
  • From: Geert Uytterhoeven
• [PATCH 7/8] ARM: dts: r8a7743: Add PMU device node
  • From: Geert Uytterhoeven
• [PATCH 5/8] ARM: dts: r8a7793: Add PMU device node
  • From: Geert Uytterhoeven
• [PATCH 3/8] ARM: dts: r8a7791: Add PMU device node
  • From: Geert Uytterhoeven
• [PATCH 2/8] ARM: dts: r8a7790: Add PMU device nodes
  • From: Geert Uytterhoeven
• [PATCH 0/8] ARM: dts: renesas: Add PMU device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH v2 00/26] device link, bridge supplier <-> drm device
  • From: Daniel Vetter
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Daniel Vetter
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Peter Rosin
• Re: igt trouble with planes shared between multiple CRTCs (Re: [PATCH v2 0/8] R-Car DU: Support CRC calculation)
  • From: Maarten Lankhorst
• [PATCH 2/2] ARM: dts: emev2: Add missing interrupt-affinity to PMU node
  • From: Geert Uytterhoeven
• [PATCH 1/2] ARM: dts: sh73a0: Add missing interrupt-affinity to PMU node
  • From: Geert Uytterhoeven
• [PATCH 0/2] ARM: dts: renesas: Add missing interrupt-affinity to PMU
  • From: Geert Uytterhoeven
• [PATCH 2/2] ARM: dts: r7s72100: Correct RTC interrupt types
  • From: Geert Uytterhoeven
• [PATCH 0/2] ARM: dts: r7s72100: Correct interrupt types
  • From: Geert Uytterhoeven
• [PATCH 1/2] ARM: dts: r7s72100: Correct watchdog timer interrupt type
  • From: Geert Uytterhoeven
• [PATCH v3 2/2] ARM: dts: r8a73a4: Correct mask for GIC PPI interrupts
  • From: Geert Uytterhoeven
• [PATCH v3 0/2] ARM: dts: renesas: Correct mask for GIC PPI interrupts
  • From: Geert Uytterhoeven
• [PATCH v3 1/2] ARM: dts: r8a7790: Correct mask for GIC PPI interrupts
  • From: Geert Uytterhoeven
• Re: [PATCH v2 26/26] drm/bridge: establish a link between the bridge supplier and consumer
  • From: Andrzej Hajda
• Re: [PATCH/RFT v2 1/3] thermal: rcar_thermal: add r8a77995 support
  • From: Simon Horman
• Re: [PATCH/RFT 2/3] mmc: renesas_sdhi: Add r8a77965 support
  • From: Simon Horman
• [PATCH] ARM: shmobile: r8a7794: alt: add EEPROM to DTS
  • From: Wolfram Sang
• [PATCH] ARM: dts: r8a7740: Add CEU1
  • From: Simon Horman
• [PATCH v3] watchdog: renesas-wdt: Add support for the R8A77965 WDT
  • From: Wolfram Sang
• Re: [v2] watchdog: renesas-wdt: Add support for the R8A77965 WDT
  • From: Wolfram Sang
• [PATCH 1/9] dt-bindings: i2c: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 0/9] tree-wide: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 3/9] base: core: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 5/9] input: ati_remote2: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 7/9] reiserfs: journal: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 6/9] NTB: ntb_hw_idt: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 9/9] objtool: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 8/9] net: flow_dissector: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 4/9] hwmon: fschmd: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• [PATCH 2/9] powerpc/watchdog: fix typo 'can by' to 'can be'
  • From: Wolfram Sang
• Re: [v2] watchdog: renesas-wdt: Add support for the R8A77965 WDT
  • From: Guenter Roeck
• Re: [PATCH v3] sh: mm: Fix unprotected access to struct device
  • From: Rich Felker
• Re: [PATCH] dt-bindings: can: rcar_can: Fix R8A7796 SoC name
  • From: Marc Kleine-Budde
• Re: [PATCH] media: i2c: adv748x: Fix pixel rate values
  • From: Niklas Söderlund
• Re: [PATCH v5] gpio: dwapb: Add support for 1 interrupt per port A GPIO
  • From: Andy Shevchenko
• Re: [PATCH] media: i2c: adv748x: Fix pixel rate values
  • From: Laurent Pinchart
• Re: [PATCH v9 01/12] ARM: Allow this header to be included by assembly files
  • From: Sergei Shtylyov
• Re: [PATCH] media: i2c: adv748x: Fix pixel rate values
  • From: Niklas Söderlund
• [PATCH v9 01/12] ARM: Allow this header to be included by assembly files
  • From: Mylène Josserand
• [PATCH v9 03/12] ARM: dts: sun8i: Add CPUCFG device node for A83T dtsi
  • From: Mylène Josserand
• [PATCH v9 02/12] ARM: sunxi: smp: Move assembly code into a file
  • From: Mylène Josserand
• [PATCH v9 05/12] ARM: dts: sun8i: a83t: Add CCI-400 node
  • From: Mylène Josserand
• [PATCH v9 04/12] ARM: dts: sun8i: Add R_CPUCFG device node for the A83T dtsi
  • From: Mylène Josserand
• [PATCH v9 07/12] ARM: sunxi: Add initialization of CNTVOFF
  • From: Mylène Josserand
• [PATCH v9 06/12] ARM: smp: Add initialization of CNTVOFF
  • From: Mylène Josserand
• [PATCH v9 09/12] ARM: sun9i: smp: Add is_a83t field
  • From: Mylène Josserand
• [PATCH v9 10/12] ARM: sun8i: smp: Add support for A83T
  • From: Mylène Josserand
• [PATCH v9 08/12] ARM: sun9i: smp: Rename clusters's power-off
  • From: Mylène Josserand
• [PATCH v9 11/12] ARM: dts: sun8i: Add enable-method for SMP support for the A83T SoC
  • From: Mylène Josserand
• [PATCH v9 12/12] ARM: shmobile: Convert file to use cntvoff
  • From: Mylène Josserand
• [PATCH v9 00/12] Sunxi: Add SMP support on A83T
  • From: Mylène Josserand
• Re: [PATCH] media: vsp1: cleanup a false positive warning
  • From: Mauro Carvalho Chehab
• Re: [PATCH/RFT 0/3] mmc: renesas_sdhi: add support for r8a77965
  • From: Wolfram Sang
• Re: [PATCH] media: vsp1: cleanup a false positive warning
  • From: Geert Uytterhoeven
• [PATCH v2 01/26] drm/bridge: allow optionally specifying an owner .odev device
  • From: Peter Rosin
• [PATCH v2 22/26] drm/rcar-du: lvds: provide an owner .odev device for the bridge
  • From: Peter Rosin
• [PATCH v2 25/26] drm/bridge: require the owner .odev to be filled in on drm_bridge_add/attach
  • From: Peter Rosin
• [PATCH v2 24/26] drm/bridge: remove the .of_node member
  • From: Peter Rosin