Since commit (015060cb "media: rcar-vin: enable field toggle after a set number of lines for Gen3) the VIN generates an internal field signal toggle after a fixed number of received lines, and uses the internal field signal to drive capture operations. When capturing from digital input, using FTEH driven field signal toggling messes up the received image sizes. Fall back to use FTEV driven signal toggling when capturing from digital input. As explained in the comment, this disables buffer overflow protection for digital input capture, for which the FOE overflow might be used in future. Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> --- drivers/media/platform/rcar-vin/rcar-dma.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c index ea7a120..8dc3455 100644 --- a/drivers/media/platform/rcar-vin/rcar-dma.c +++ b/drivers/media/platform/rcar-vin/rcar-dma.c @@ -685,11 +685,27 @@ static int rvin_setup(struct rvin_dev *vin) break; } - if (vin->info->model == RCAR_GEN3) { + if (vin->info->model == RCAR_GEN3 && + vin->mbus_cfg.type == V4L2_MBUS_CSI2) { /* Enable HSYNC Field Toggle mode after height HSYNC inputs. */ lines = vin->format.height / (halfsize ? 2 : 1); dmr2 = VNDMR2_FTEH | VNDMR2_HLV(lines); vin_dbg(vin, "Field Toogle after %u lines\n", lines); + } else if (vin->info->model == RCAR_GEN3 && + vin->mbus_cfg.type == V4L2_MBUS_PARALLEL) { + /* + * FIXME + * Section 26.3.17 specifies that for digital input there's no + * need to program FTEH or FTEV to generate internal + * field toggle signal to driver capture. Although when + * running on GEN3 with digital input no EFE interrupt is ever + * generated, and we need to rely on FTEV driven field signal + * toggling, as using FTEH as in the CSI-2 case, messes up + * the output image size. This implies no protection + * against buffer overflow is in place for Gen3 digital input + * capture. + */ + dmr2 = VNDMR2_FTEV; } else { /* Enable VSYNC Field Toogle mode after one VSYNC input. */ dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1); -- 2.7.4